ST Stainless Catalogue
ST Stainless Catalogue
ST Stainless Catalogue
EGD9J8IH!6G8=>I:8IJG6AH=::I!
6C9EGDI:8I>K:;>ABH
EGDJ9AN7GDJ<=IIDNDJ7N 7N NDJ7 NDJ7
Stainless Catalogue
QUALITY STAINLESS STEEL PRODUCTS
3
Contents
>CIGD9J8I>DC 4
HI6>CA:HHHI::A;>C>H=:H6C9INE:H 5
HI6>CA:HHHI::A8D>A$H=::I 10
HI6>CA:HHHI::AEA6I: 11
HI6>CA:HHHI::AGDJC976G 12
HI6>CA:HHHI::A;A6I76G 13
HI6>CA:HHHI::A6C<A:!HFJ6G:8=6CC:A76G 15
HI6>CA:HHHI::AE>E: 16
HI6>CA:HHHI::AE>E:;>II>C<H 19
HI6>CA:HHHI::A;A6C<:H 38
K>8I6JA>8EG:HH;>IGDAA;>IE>E:HNHI:BH 41
HI6>CA:HHHI::AHFJ6G:G:8I6C<JA6GIJ7: 43
HI6>CA:HHHI::A=N<>:C>8IJ7: 44
HI6>CA:HHHI::AHE>G6L:A9IJ7: 45
HI6>CA:HHHI::AH:6BA:HHIJ7: 46
HI6>CA:HHHI::AIJ7:7:C9H 47
@A:6C;ADL;>II>C<H 51
E>E:I>I:
IB
54
HI6>CA:HHHI::AK6AK:H 55
HI6>CA:HHHI::A;6HI:C:GH8=6>C 63
HI6>CA:HHHI::AI:CH>DC>C<GD9H 64
HI6>CA:HHHI::AE:G;DG6I:9H=::I 65
HI6>CA:HHHI::AB:H= 66
6G8=>I:8IJG6AHI6>CA:HHH=::I 68
EGDI:8I>K:;>ABH 70
6"?JHI6;DDIEGD9J8IH 71
DI=:GEGD9J8I7GD8=JG:H 72
4
General Information
Steel & Tube Stainless is a leading distributor of Stainless Steels, operating from several
locations nationwide. We have extensive experience in providing ongoing maintenance
support to major corporations, supplying large scale projects, and of course catering to
the day to day requirements of New Zealands stainless steel fabricators.
Major end-use industries include:
Dairy Wine & Beverage
Pulp and Paper Catering Equipment
Architectural / Construction Meat & Food Processing
Water Treatment Petrochemical Industries
Our extensive range includes the following products, with 304 and 316 Austenitic grades
available ex stock while more exotic grades & products are offered on an indent basis.
Flat products, such as stainless steel coil, sheet and plate
Bars in round, square, fat ,angle and channel
Square & Rectangular Tube
Schedule pipe and fttings
Hygienic tube and fttings
Architectural Balustrades & Fittings
Mesh & Perforated Sheet
Pipe and Tube valves
Coloured, patterned and textured, architectural stainless steel sheet
Fasteners
Tig stainless steel welding wires
Protective flms
We also stock a comprehensive range of sundry items.
5
Stainless Steel Finishes
Common fnishes held in stock are No.1 , 2B, BA, No.4, however other fnishes can
be sourced.
FINISHES
No.1 Hot rolled, annealed and pickled. Generally used where smoothness of fnish is not
a design consideration.
2D A cold rolled fnish obtained from a fnal annealing and pickling, or a fnal light cold
roll pass on dull rollers, which may be polished after fabrication.
2B A smooth fnish for general applications. A brighter fnish than 2D.
BA (Bright Annealed) A refective surface obtained from bright annealing after cold
rolling. Used for deep drawing products such as sinks, tubs etc. Sheets can be polished
on 1 or 2 sides.
No.4 A brushed or satin fnish obtained from mechanical polishing with 120-240 grit.
Used in dairy and kitchen equipment. Meets international 3A Hygiene Standards.
No.8 A mirror fnish for high refectiveness. Can be used as mirrors or refectors.
HL (Hairline) A fnish obtained by mechanical polishing with 120-320 grit.
CF (Cold formed) A smooth fat refective fnish.
BP (Buff polished) Mechanically polished tube using 220-240 grit.
AW (As Welded) Receives no further treatment after forming and welding.
SPECIAL NOTES
Although every endeavour has been made to have all detail contained in the catalogue
correct at the time of printing, we suggest product specifcation be confrmed with your
Steel and Tube Stainless representative when placing orders.
For an up to date version of this catalogue please refer to our web site. Items identifed
in this catalogue as stocked items are defned as goods normally held in stock, and are
subject to prior sales.
Steel and Tube Stainless terms of trade are supplied at the time of opening a trading
account and are available upon request. A copy of this appears on the reverse of all
invoices issued. A minimum order charge may apply.
All weights and dimensions provided in this catalogue are theoretical.
Mill tolerances will affect actual weights (+/-). All weights in this catalogue are based on a
density of stainless steel being 8000kgs/m
3.
Types of Stainless Steels
Stainless steel is a name given to a group of steel alloys that contain more than 10.5%
Chromium. Chromium has a high affinity for oxygen and forms a stable oxide flm on the
surface of stainless steel.
The flm is called the passive oxide layer and forms instantaneously in ordinary
atmospheres. The flm is self healing and rebuilds when it has been removed. It is this
flm that gives stainless steel its corrosion resistance.
AUSTENITIC GRADES
When nickel (Ni) is added to stainless steel in sufficient quantities the crystal structure is
changed from Ferrite to Austenite, hence the term Austenitic stainless steel. The basic
composition of austenitic stainless steel is 18% chromium (Cr) and 8% Nickel (Ni). This is
called 304 grade, sometimes referred to as 18/8 or 18/10. If additional corrosion resistance
is required 2% molybdenum (Mo) is added to form grade 316.
DESCRIPTIONS AND GENERAL USES
200 Series (Indent Only)
The 200-series is a technically valid family of stainless steels but, like all stainless steel
grades, they have their limitations. Because the 200-series grades are austenitic, they
are not magnetic and are therefore very difficult to distinguish from the widely used 300-
series grades. Most growth in 200-series use over recent years has been in low-nickel
and therefore low-chromium versions which have less corrosion resistance than 304. The
end result has been corrosion failures in some applications.
302 (Indent Only)
This grade is the original general purpose 18/8 stainless steel (18% Chromium 8% Nickel).
It has good corrosion resistance combined with good physical properties - it has
excellent ductility and welding properties. Non-magnetic when annealed and becomes
slightly magnetic when cold worked.
303 (Indent Only)
Especially developed for machining - specially where it involves extensive machining
in automatic screw machines. Sulphur or Selenium is added to give excellent free
machining and non seizing properties. As Sulphur or Selenium is added corrosion
resistance is lower than T304. T303 is not recommended for welding. Non-magnetic
when annealed but becomes slightly magnetic when cold worked.
304
The most widely used stainless steel with the best all round performance. Its carbon
content is lower and its corrosion after welding resistance is higher than T302. It is less
susceptible to intergranular corrosion after welding. Non magnetic but slightly magnetic
when cold worked.
6
7
304L
A low carbon stainless steel with general corrosion resistance like T304, but with
superior resistance to intergranular corrosion following welding or stress relieving.
Highly recommended for parts which are fabricated by welding and which can not be
annealed. Generally limited to temperatures up to 426C. The physical properties and
thermal treatments of T304L are similar but not identical to T304. Non magnetic when
annealed but slightly magnetic when cold worked.
310S (Indent Only)
310S has been developed for high temperature service where high creep strength is
required. Max service temp is around 1100C but it is not recommended for applications
of prolonged service as it may become brittle. Non magnetic when annealed or cold
worked.
316
Also known as Marine grade stainless steel. T316 has 2-3% Molybdenum which improves
corrosion resistance. T316 has superior corrosion resistance to other austenitic steels
when exposed to many types of chemical corrodents as well as marine environments
-T316 also has applications in the chemical, textile, and paper industries. It has better
strength and creep resistance at high temperatures than T304 and greater work
hardening properties. Non magnetic but slightly magnetic when cold worked.
316L
Has lower carbon than T316, with corrosion resistance similar to T316 but superior
resistance to intergranular corrosion following welding or stress relieving. It is
recommended for parts which cannot be subsequently annealed. Service temperatures
up to 426C. The physical properties and thermal treatments of type 316L are similar but
not identical to type 316. Non-magnetic when annealed but slightly magnetic when
cold worked.
321 (Indent Only)
Basically 302 (basic 18/8) stabilised by the addition of Titanium to fve times the carbon
content. This prevents intergranular corrosion and offers scale resistance at higher
temperatures up to 850C. Corrosion resistance is lower than 304. Not recommended
for bright/mirror polishing. Non-magnetic when annealed but slightly magnetic when
cold worked.
904L (Indent Only)
High resistance to general corrosion, e.g Sulphuric and acetic acids, crevice corrosion,
stress corrosion, pitting in chlorine bearing solutions. Good weldability.
Types of Stainless Steels [Contd.]
8
MARTENSITIC GRADES
This grade contains 12%-18% Chromium and 0.08%-1.00% carbon. The high carbon
content allows the stainless steel to respond well to heat treatment to give various
mechanical strengths such as hardness. However the carbon is detrimental when
welding and care must be taken.
DESCRIPTIONS AND GENERAL USES
409 (Indent Only)
Type 409 is general purpose construction stainless steel. Primarily intended for
automotive exhaust systems and in other applications where appearance is secondary to
mechanical and corrosion resistance.
410 (Indent Only)
Type 410 is the general purpose corrosion and heat resisting martensitic stainless steel.
It has good corrosion resistance and can be easily forged and machined. But it is not
suitable under severe corrosion enviroments. It is magnetic in all conditions. Main use is
for stainless steel cutlery.
420 (Indent Only)
Type 420 has a higher carbon content than 410 to increase hardness to a maximum of
approx 500 Brinell. It has optimum corrosion resisting qualitities in the hardened and
tempered conditions. Type 420 is magnetic in all conditions.
431 (Indent Only)
Type 431 is a nickel bearing martensitic stainless steel designed for heat treatment to the
highest mechanical properties. Its corrosion resistance is superior to that of type 410 and
430. Magnetic in all conditions.
9
FERRITIC GRADES
These are nickel free. They have varying chromium content of 12%-22% but a lower
carbon content than the Martensitic grades.
The increased Chromium increases corrosion resistance at elevated temperatures,
however the lack of mechanical properties due to the fact that it can not be heat treated
limits its application.
DESCRIPTIONS AND GENERAL USES
430
Type 430 is a corrosion and heat resisting stainless steel with superior corrosion and
heat resistance compared to type 410. Type 430 is non hardenable and possesses
only mild cold working properties due to the high chromium content. Its weldability
is excellent and does not require subsequent annealing. Magnetic in all conditions.
Common uses include builders hardware, domestic appliances (driers, dishwashers) and
automotive trim.
DUPLEX STAINLESS STEEL
Duplex stainless steels have a structure of approximately equal amounts of ferrite and
austenitic and therefore may be referred to as ferritic-austenitic stainless steel.
The chromium varies from 18%-28% and a Nickel content of 4.5% to 8% is insufficient
to develop a fully austenitic crystal structure. Most grades contain Molybdenum in
the 2.5%-4%, plus a small nitrogen addition which enables both strength and pitting
resistance. Common uses include applications such as heat exchanger panels and
tubes, tanks and vessels where high chloride concentrations are present e.g. sea water
cooling, desalination, food pickling plants and aggressive marine waters.
NICKEL AS A PRICE DRIVER
Understanding how nickel affects the price of stainless steel can be relayed as follows:-
T304 has approximately 8% nickel (so 1000 kg of S/S has 80 kg of nickel)
T316 has approximately 10% nickel (so 1000 kg of S/S has 100 kg of nickel)
Example: If nickel is approximately NZ $50,000 / MT or NZD $50.00 /kg
Therefore in:
1.0 MT of T304 stainless steel the NICKEL COST is 80kg x $50 = NZD $4000 / MT ($4.00 / KG)
1.0 MT of T316 stainless steel the NICKEL COST is 100 kg x $50 = NZD $5000 / MT ($5.00 / KG)
Please refer to the London Metal Exchange website http://www.lme.co.uk/nickel.asp
for up to date nickel prices.
Nickel is one of the key elements in determining the price of stainless steel.
Other factors affecting prices include; NZD exchange rates, worldwide scrap supply and
general worldwide supply and demand for stainless steel.
10
Coil/Sheet
STAINLESS SHEET. MATERIAL COLD-ROLLED TO ASTM A240
SIZE 304 316/316L 430
APPROX
Kg/SHEET
THICKNESS
mm
WIDTH
mm
LENGTH
mm
2B 2B/PE
No.4/
PE
BA/PE 2B/PE
No.4
/PE
4/PE BA/PE
0.45 1220 2440 * 10.72
0.55 1220 2440 * * * 13.10
0.7 1220 2440 * * * * * 16.67
0.9 1220 2440 * * ** * * * 21.43
0.9 1220 3048 * 26.77
1.0 1220 2440 * 23.81
1.2 914 3000 * * 26.32
1.2 914 3600 * * 31.59
1.2 1220 2440 * * * * * * * 28.58
1.2 1220 3000 * * 35.14
1.2 1220 3600 * 42.16
1.2 1500 3000 * * 43.20
1.2 1500 3600 * 51.84
1.5 1220 2440 * * * * * * * 35.72
1.5 1220 3048 * 44.62
1.5 1500 3000 * * * 54.00
1.5 1525 3048 * 55.78
2.0 1220 2440 * * * * * * 47.63
2.0 1500 3000 * * * 72.00
2.0 1525 3048 * 74.37
2.5 1220 2440 * * * 59.54
2.5 1500 3000 * 90.00
2.5 1525 3048 * 92.96
3.0 1220 2440 * * * * 71.44
3.0 1220 3000 * 87.84
3.0 1220 3600 * 105.41
3.0 1500 3000 * * * 108.00
3.0 1525 3048 * * 111.56
* Denotes normal stock items ** Also stocked with PE both sides
Other sizes also available on request.
Finishes: 2B = cold-rolled, softened and descaled;
BA = Bright Annealed; No.4 = Polished 120 - 240 grit;
other fnishes also available on request.
Additional Services: PE/Laser Coating available
for all sheets.
Polishing also available (lead times may apply).
Weights are based on a density of 8000 kg/m
3
.
Stainless Steel Coil Material manufactured to ASTM A240 / A480.
Internal Core Dimensions (ID):
< 1220mm wide = 508mm ID, > 1500mm wide = 610mm ID
Coils available in one (1) or two (2) ton (with allowance of +/- 10%), other
sizes available on request.
Finishes: 2B = cold rolled, softened and descaled, No. 4 = Polished 240 grit.
Sizes: Widths 914mm / 1220mm / 1524mm all laser PE coated.
Thickness - 0.9mm through to 3.0mm.
Grades: 304/L and 316/L. Other fnishes available on request.
11
Plate
STAINLESS PLATE HRAP (HOT-ROLLED ANNEALED AND PICKLED)
MATERIAL TO ASTM A240
SIZE 304/304L 316/316L
APPROX
Kg/PLATE
THICKNESS
mm
WIDTH
mm
LENGTH
mm
No.1 2B/PE No.1 2B/PE
4 1220 2440 * * 95.26
4 1500 3000 * * 144.00
4 1525 3048 * * 148.74
5 1220 2440 * * 119.07
5 1500 3000 * * * * 180.00
5 1525 3048 * * * * 185.93
6 1220 2440 * * * 142.89
6 1500 3000 * * * * 216.00
6 1525 3048 * * * * 223.11
8 1500 3000 * * 288.00
10 1500 3000 * * 360.00
12 1500 3000 * * 432.00
16 1500 3000 * * 576.00
20 1500 3000 * * 720.00
25 1500 3000 900.00
30 1500 3000 1080.00
32 1500 3000 1152.00
40 1500 3000 1440.00
50 1500 3000 1800.00
STAINLESS CHEQUER PLATE
SIZE
304L
.1
APPROX
Kg/SHEET
THICKNESS
mm
WIDTH mm Length mm
3 1220 2440 * 71.44
3.5 1220 2440 * 83.35
4.5 1220 2440 * 107.16
5 1220 2440 119.07
s m e t i k c o t s l a m r o n s e t o n e D *
s m e t i k c o t s l a m r o n s e t o n e D *
Other sizes also available
on request up to 2m wide
by 9m length. Other grades
(including Duplex) also
available on request.
Finishes: 2B = cold-rolled,
softened and descaled;
No.1 = Hot-rolled, annealed
and pickled - HRAP.
Additional Services:
PE/Laser Coating available
for all plate. Polishing also
available (lead times may
apply).
Available in 316 on request.
Finishes: No.1 = Hot-rolled, annealed and pickled.
12
Round Bar
STAINLESS ROUND BAR. METRIC.
MATERIAL TO A276/A484
(DIMENSION/STRAIGHTNESS)
SIZE
304 316
TOLER-
ANCE
THEORETICAL
WEIGHT
Kg/m
DIAMETER
mm
4 * h9 0.10
5 * * h9 0.16
6 * * h9 0.23
8 * * h9 0.40
10 * * h9 0.63
12 * * h9 0.90
16 * * h9 1.61
20 * * h9 2.51
25 * * h9 3.93
30 * h11 5.65
40 * * h11 10.05
45 * h11 12.72
50 * h11 15.70
60 * h11 22.61
65 * h11 26.53
70 * * h11 30.77
80 * * h11 40.19
90 * * h11 50.87
100 * * h11 62.80
110 * h11 75.99
120 * * h11 90.43
130 * * h11 106.13
140 * * h11 123.09
150 * * h11 141.30
170 * * h11 181.49
200 * h11 251.20
STAINLESS ROUND BAR. IMPERIAL.
MATERIAL TO A276/A484
(DIMENSION/STRAIGHTNESS)
SIZE
304 316
TOLER-
ANCE
THEORETICAL
WEIGHT
Kg/m
DIAMETER
mm
DIAMETER
inch
3.18 1/8 * h9 0.06
4.75 3/16 * * h9 0.14
6.35 1/4 h9 0.25
7.92 5/16 * h9 0.39
9.52 3/8 h9 0.57
12.70 1/2 * * h9 1.01
15.88 5/8 * * h9 1.58
19.05 3/4 * * h9 2.28
25.40 1 * * h9 4.05
31.75 1 1/4 * h11 6.33
34.93 1 3/8 h11 7.66
38.10 1 1/2 h11 9.12
50.80 2 * h11 16.21
63.50 2 1/2 * h11 25.32
DIAMETER TOLERANCE OF
STAINLESS ROUND BAR
DIAMETER
mm
h9 h11
3 and under +0, -0.025 +0, -0.060
3 to 6 incl. +0, -0.030 +0, -0.075
over 6 to 10 incl. +0, -0.036 +0, -0.090
over 10 to 18 incl. +0, -0.043 +0, -0.110
over 18 to 30 incl. +0, -0.052 +0, -0.130
over 30 to 50 incl. +0, -0.062 +0, -0.160
over 50 to 80 incl. +0, -0.074 +0, -0.190
over 80 to 120 incl. +0, -0.087 +0, -0.220
* Denotes normal stock items
Other sizes also available on request.
Length: Standard lengths 4 metres. Minimum cut lengths and cutting charges may apply.
Finishes: Diameter 25mm (1) and under ASTM A276, cold drawn/polished.
Diameter greater than 25mm (1) ASTM A276 smooth turned, improved machining abilities.
13
Flat Bar
STAINLESS FLAT BAR. MATERIAL TO ASTM A276
SIZE
THICKNESS x WIDTH
304 316
APPROX
Kg/m
mm
SRE
No.1
Polished
HRAP
No.1
SRE
No.1
Polished
HRAP
No.1
3 x 13 * 0.31
3 x 20 * * 0.48
3 x 25 * * * 0.60
3 x 30 * 0.72
3 x 40 * * * 0.96
3 x 50 * * * 1.20
5 x 20 * 0.80
5 x 25 * * 1.00
5 x 30 * * * 1.20
5 x 40 * * * * 1.60
5 x 50 * * * * 2.00
5 x 75 * 3.00
5 x 100 * 4.00
5 x 150 * 6.00
6 x 20 * 0.96
6 x 25 * * 1.20
6 x 30 * 1.44
6 x 40 * * 1.92
6 x 50 * * * * * 2.40
6 x 65 * * 3.12
6 x 75 * * * 3.60
6 x 100 * * 4.80
6 x 150 * 7.20
9 x 50 * 3.60
9 x 100 * 7.20
10 x 25 * * 2.00
10 x 30 * 2.40
10 x 40 * * * 3.20
10 x 50 * * * 4.00
10 x 65 * * 5.20
10 x 75 * * * 6.00
10 x 100 * * * 8.00
10 x 150 * 12.00
12 x 25 * * 2.40
12 x 40 * * 3.84
12 x 50 * * 4.80
12 x 65 * 6.24
* Denotes normal stock items. NB: Table continues overleaf.
14
Flat Bar [Contd.]
STAINLESS FLAT BAR. MATERIAL TO ASTM A276
SIZE
THICKNESS x WIDTH
304 316
APPROX
Kg/m
mm
SRE
No.1
Polished
HRAP
No.1
SRE
No.1
Polished
HRAP
No.1
12 x 75 * * 7.20
12 x 100 * * 9.60
12 x 150 14.40
16 x 50 * 6.40
16 x 75 * 9.60
19 x 50 * 7.60
19 x 100 * 15.20
20 x 100 * 16.00
25 x 50 * * 10.00
25 x 75 * 15.00
25 x 100 * 20.00
* Denotes normal stock items
Other sizes and fnishes also available on request.
Length: Standard lengths 4 metres. Minimum cut lengths and cutting
charges may apply.
Finishes: SRE = Slit Rolled Edge, Polished = between 120 - 240 grit,
HRAP = Hot Rolled Annealed and Pickled.
Additional Services: Polishing available - lead times may apply.
15
Angle, Square &Channel Bar
STAINLESS ANGLE BAR
MATERIAL TO ASTM A276
SIZE
THICKNESS x WIDTH
304 316
APPROX
Kg/m
mm HRAP CF HRAP CF
3 x 20 x 20 * 0.89
3 x 25 x 25 * * * 1.13
3 x 30 x 30 * * 1.36
3 x 40 x 40 * * * 1.85
3 x 50 x 50 * * * 2.30
5 x 25 x 25 * 1.80
5 x 30 x 30 * 2.20
5 x 40 x 40 * * 2.98
5 x 50 x 50 * 3.80
6 x 25 x 25 * 2.10
6 x 40 x 40 * 3.50
6 x 50 x 50 * * 4.46
6 x 65 x 65 * * 5.85
6 x 75 x 75 * * 6.88
6 x 100 x 100 * * 9.10
9 x 75 x 75 * * 10.00
10 x 100 x 100 * * 15.00
STAINLESS SQUARE BAR
MATERIAL TO ASTM A276
SIZE
THICKNESS x WIDTH
304 316
APPROX
Kg/m
mm HRAP CD HRAP CD
5 0.20
6 * 0.29
8 * * 0.51
10 * * 0.80
12 * * 1.15
16 * 2.05
20 * * * 3.20
25 * * 5.00
32 * 8.19
40 * 12.80
50 * 20.00
STAINLESS CHANNEL BAR
MATERIAL TO ASTM A276
SIZE
THICKNESS x WIDTH
304
APPROX
Kg/m
mm HRAP
5 x 40 x 80 * 6.10
6 x 50 x 100 * 9.15
6 x 75 x 150 14.1
Other sizes and fnishes also
available on request.
Length: Standard lengths 3 metres. Minimum cut
lengths and cutting charges may apply.
Finishes: CD = Cold Drawn, HRAP = Hot Rolled
Annealed and Pickled.
Other sizes and fnishes also
available on request.
Length: Standard lengths 6 metres.
Minimum cut lengths and cutting charges
may apply.
Finishes: HRAP = Hot Rolled Annealed and Pickled.
Other sizes and fnishes also available on request.
Length: Standard lengths 4 metres for CF and 6
metres for HRAP. Minimum cut lengths and cutting
charges may apply.
Finishes: CF = Cold Formed smooth bright
fnish/edge with radius external corner,
HRAP = Hot Rolled Annealed and Pickled.
s m e t i k c o t s l a m r o n s e t o n e D *
16
Pipe Technical Data
STEEL PIPE METRIC CONVERSION THEORETICAL BURSTING PRESSURES
NOMINAL
BORE
mm
NOMINAL
BORE
INCHES
NOMINAL
BORE
OD
mm
SCHEDULE 10S SCHEDULE 40S SCHEDULE 80S
WALL
mm
WEIGHT
kg/m
PRESSURE
kPa*
WALL
mm
WEIGHT
kg/m
PRESSURE
kPa*
WALL
mm
WEIGHT
kg/m
PRESSURE
kPa
6 1/8" 10.29 1.24 0.28 125139 1.73 0.37 173575 2.41 0.47 242523
8 1/4" 13.72 1.65 0.49 124450 2.24 0.63 168576 3.02 0.80 227871
10 3/8" 17.15 1.65 0.63 99629 2.31 0.84 139446 3.20 1.10 193053
15 1/2" 21.34 2.11 1.00 102214 2.77 1.27 134275 3.73 1.62 180987
20 3/4" 26.67 2.11 1.28 81702 2.87 1.69 111350 3.91 2.20 151684
25 1" 33.40 2.77 2.09 85839 3.38 2.50 104628 4.55 3.24 140825
32 1 1/4" 42.16 2.77 2.70 67913 3.56 3.39 87218 4.85 4.47 118934
40 1 1/2" 48.26 2.77 3.11 59295 3.68 4.05 78945 5.08 5.41 108937
50 2" 60.33 2.77 3.93 47401 3.91 5.44 67224 5.54 7.48 94975
65 2 1/2" 73.03 3.05 5.26 43092 5.16 8.63 73084 7.01 11.41 99284
80 3" 88.90 3.05 6.45 35508 5.49 11.29 63776 7.62 15.27 88646
100 4" 114.3 3.05 8.36 27579 6.02 16.07 54468 8.56 22.32 77452
125 5" 141.3 3.40 11.57 24993 6.55 21.77 47918 9.52 30.97 69678
150 6" 168.28 3.40 13.84 21029 7.11 28.26 43782 10.97 42.6 67418
200 8" 219.08 3.76 19.96 17754 8.18 42.55 38610 12.70 64.6 59974
250 10" 273.05 4.19 27.80 15857 9.27 60.30 35163 12.70 96.01 48102
300 12" 323.85 4.57 36.00 14651 9.53 73.88 30337 12.70 132.08 40557
350 14" 355.6 4.78 41.30 13967
*theoretical internal bursting pressure calculated
using formula; P=2St/OD
400 16" 406.4 4.78 47.29 12238
450 18" 457.2 4.78 53.26 10859
500 20" 508 5.54 68.61 11204
Nominal Bursting, test and working pressures for Stainless Steel Pipe (based on Barlows Formula)
BURSTING PRESSURE RATING : (ref ASTM A230M) P=(2 x S x t)/OD
P = Bursting pressure im MPa (x 1000 to get Kpa)
t = wall thickness (mm)
OD = Outside diameter (mm)
S = Minimum Ultimate Tensile Strength in Mpa
Test Pressure:
substitute : s = 50-60% of minimum material 0.2% yield stress Mpa
THEORETICAL BURSTING PRESSURES OF STAINLESS STEEL PIPE
Material to ASTM A312
17
Schedule Pipe
STAINLESS SCHEDULE 10 PIPE
MATERIAL TO ASTM A312
SIZE
[NOMINAL BORE]
OUTSIDE
DIAMETER
mm
WALL
THICKNESS
mm
WELDED SEAMLESS
kgs/m
mm INCH 304L 316L 316L
15 1/2" 21.34 2.11 * * 1.00
20 3/4" 26.67 2.11 * * 1.28
25 1" 33.41 2.77 * * 2.09
32 1 1/4" 42.16 2.77 * * 2.70
40 1 1/2" 48.26 2.77 * * 3.11
50 2" 60.03 2.77 * * 3.93
65 2 1/2" 73.03 3.05 * * 5.26
80 3" 88.90 3.05 * * 6.45
90 3 1/2" 101.60 3.05 * 7.40
100 4" 114.30 3.05 * * 8.36
125 5" 141.30 3.40 * 11.57
150 6" 168.28 3.40 * * 13.84
200 8" 219.18 3.76 * * 20.00
250 10" 273.05 4.19 * 27.80
300 12" 323.85 4.57 * 36.00
350 14" 355.60 4.78 * 41.30
400 16" 406.40 4.78 * 47.29
450 18" 457.20 4.78 * 53.26
500 20" 508.00 5.54 * 68.61
600 24" 609.60 6.50 94.45
750 30" 762.00 8.00 147.36
Other sizes including schedule 160 316L available on request.
See Pipe Technical Data on page 16 for dimensions,
theoretical weights and theroretical bursting pressures (kPa)
of schedule pipe.
* Denotes normal stock items
18
Schedule Pipe [Contd.]
STAINLESS SCHEDULE 80 PIPE
MATERIAL TO ASTM A312
SIZE
[NOMINAL BORE]
OUTSIDE
DIAMETER
mm
WALL
THICKNESS
mm
WELDED
SEAM-
LESS
kgs/m
mm INCH 304L 316L 316L
8 1/4" 13.72 3.02 * 0.80
10 3/8" 17.15 3.20 * 1.10
15 1/2" 21.34 3.73 * 1.62
20 3/4" 26.67 3.91 * 2.20
25 1" 33.41 4.55 * 3.24
32 1 1/4" 42.16 4.85 * 4.47
40 1 1/2" 48.26 5.08 * 5.41
50 2" 60.03 5.54 * 7.48
65 2 1/2" 73.03 7.01 * 11.41
80 3" 88.90 7.62 * 15.27
100 4" 114.30 8.56 * 22.32
125 5" 141.30 9.52 30.97
150 6" 168.28 10.97 42.60
200 8" 219.08 12.70 64.60
250 10" 273.05 12.70 96.01
Other sizes also available
on request.
Schedule 160 316L
seamless available on
request.
See Pipe Technical
Data on page 16 for
dimensions, theoretical
weights and theoretical
bursting pressures (kPa) of
schedule pipe.
Additional services:
Polishing
(lead times may apply)
* Denotes normal stock items
STAINLESS SCHEDULE 40 PIPE
MATERIAL TO ASTM A312
SIZE
[NOMINAL BORE]
OUTSIDE
DIAMETER
mm
WALL
THICKNESS
mm
WELDED
SEAM-
LESS
kgs/m
mm INCH 304L 316L 316L
6 1/8" 10.29 1.73 * * 0.37
8 1/4" 13.72 2.24 * * * 0.63
10 3/8" 17.15 2.31 * 0.84
15 1/2" 21.34 2.77 * * * 1.27
20 3/4" 26.67 2.87 * * 1.69
25 1" 33.41 3.38 * * * 2.50
32 1 1/4" 42.16 3.56 * * * 3.39
40 1 1/2" 48.26 3.68 * * * 4.05
50 2" 60.03 3.91 * * * 5.44
65 2 1/2" 73.03 5.16 * * 8.63
80 3" 88.9 5.49 * * * 11.29
90 3 1/2" 101.6 5.74 * 13.60
100 4" 114.3 6.02 * * 16.07
125 5" 141.3 6.55 * 21.77
150 6" 168.28 7.11 * * 28.26
200 8" 219.08 8.18 * * 42.55
250 10" 273.05 9.27 60.30
300 12" 323.85 9.53 73.88
400 16" 406.4 12.70 125.00
19
Butt Weld Pipe Fittings
Other sizes and grades
also available on request
including seamless.
* Denotes normal stock items
90 DEGREES LONG RADIUS
90 DEGREES SHORT RADIUS
45 DEGREE ELBOW
STRAIGHT TEE
STAINLESS SCHEDULE 10 AND 40 BUTT WELD 90 DEGREE ELBOW
NOMINAL PIPE SIZE
mm
90 DEGREES LONG RADIUS 90 DEGREES SHORT RADIUS
mm INCH 304L S10 316L S10 304L S40 316L S40 304L S10 316L S10
304L
S40
316L S40
15 1/2" * * * *
20 3/4" * * * *
25 1" * * * * * *
32 1 1/4" * * * * * *
40 1 1/2" * * * * * *
50 2" * * * * * *
65 2 1/2" * * * * *
80 3" * * * * * *
90 3 1/2" * *
100 4" * * * * * *
125 5" * *
150 6" * * * * *
200 8" * *
250 10" * *
300 12" *
350 14" *
400 16" *
450 18"
500 20"
STAINLESS SCHEDULE 10
AND 40 BUTT WELD
45 DEGREE ELBOW
NOMINAL PIPE SIZE
mm
SCHEDULE
10
SCHEDULE
40
mm INCH 304L/316L 304L/316L
15 1/2" * *
20 3/4" * *
25 1" * *
32 1 1/4" * *
40 1 1/2" * *
50 2" * *
65 2 1/2" * *
80 3" * *
90 3 1/2"
100 4" * *
125 5" * *
150 6" * *
200 8" *
250 10" *
STAINLESS SCHEDULE 10
AND 40 BUTT WELD
STRAIGHT TEE
NOMINAL PIPE SIZE
mm
SCHEDULE
10
SCHEDULE
40
mm INCH 304L/316L 304L/316L
15 1/2" * *
20 3/4" * *
25 1" * *
32 1 1/4" * *
40 1 1/2" * *
50 2" * *
65 2 1/2" * *
80 3" * *
90 3 1/2"
100 4" * *
125 5"
150 6" * *
200 8" *
250 10" *
300 12" *
350 14" *
400 16"
450 18"
500 20"
20
Butt Weld Pipe Fittings [Contd.]
Other sizes and grades
also available on request.
* Denotes normal stock items
REDUCING TEE
ECCENTRIC REDUCER
STAINLESS SCHEDULE 10 AND 40
BUTT WELD REDUCING TEE
NOMINAL PIPE
SIZE
mm
SCHEDULE 10
316L
SCHEDULE 40
316L
20 x 15 *
25 x 15 *
25 x 20 * *
32 x 15 *
32 x 20 *
32 x 25 *
40 x 15 *
40 x 20 * *
40 x 25 * *
40 x 32 *
50 x 20 *
50 x 25 * *
50 x 32 *
50 x 40 *
65 x 40 *
65 x 50 *
80 x 25
80 x 40 *
80 x 50 * *
80 x 65 * *
100 x 40 *
100 x 50 *
100 x 65 *
100 x 80 * *
150 x 80 *
150 x 100 * *
STAINLESS SCHEDULE 10 AND 40
BUTT WELD ECCENTRIC REDUCER
NOMINAL PIPE
SIZE
mm
SCHEDULE 10
316L
SCHEDULE 40
316L
20 x 15 *
25 x 15 *
25 x 20
32 x 15 *
32 x 20 *
32 x 25
40 x 15 *
40 x 20 * *
40 x 25 *
40 x 32 *
50 x 15
50 x 20
50 x 25 * *
50 x 32
50 x 40 * *
65 x 25
65 x 32
65 x 40 *
65 x 50 *
80 x 25
80 x 40 *
80 x 50 * *
80 x 65 * *
100 x 40
100 x 50 *
100 x 65
100 x 80 * *
125 x 80
125 x 100
150 x 80 *
150 x 100 * *
150 x 125
200 x 100
200 x 125
200 x 150 *
250 x 100
250 x 150
250 x 200 *
300 x 150
300 x 200 *
300 x 250 *
350 x 150
400 x 300
21
Butt Weld Pipe Fittings [Contd.]
Other sizes
and grades
also available
on request.
* Denotes normal
stock items
CONCENTRIC REDUCER TYPE A STUB END
STAINLESS SCHEDULE 10 AND 40
BUTT WELD CONCENTRIC REDUCER
NOMINAL PIPE
SIZE
mm
SCHEDULE 10
316L
SCHEDULE 40
316L
20 x 15 * *
25 x 15 * *
25 x 20 * *
32 x 15
32 x 20 * *
32 x 25 * *
40 x 15
40 x 20 * *
40 x 25 * *
40 x 32 * *
50 x 15 *
50 x 20 * *
50 x 25 * *
50 x 32 * *
50 x 40 * *
65 x 25 * *
65 x 32 *
65 x 40 * *
65 x 50 * *
80 x 25 * *
80 x 40 * *
80 x 50 * *
80 x 65 * *
100 x 40 *
100 x 50 * *
100 x 65 * *
100 x 80 * *
125 x 80
125 x 100 *
150 x 80 * *
150 x 100 * *
150 x 125 *
200 x 100 *
200 x 125 *
200 x 150 * *
250 x 100 *
250 x 150 *
250 x 200 * *
300 x 150
300 x 200 *
300 x 250 *
350 x 150 *
350 x 200 *
350 x 250 *
400 x 300 *
STAINLESS SCHEDULE 10 AND 40
TYPE A STUB END
NOMINAL PIPE SIZE
OUTSIDE
DIAMETER
SCHEDULE
10
316L
SCHEDULE 40
316L
mm INCH
15 1/2" 34.93
20 3/4" 42.88
25 1" 50.80 * *
32 1 1/4" 63.50 * *
40 1 1/2" 73.03 * *
50 2" 92.08 * *
65 2 1/2" 104.78 *
80 3" 127.00 * *
100 4" 157.18 * *
150 6" 215.90 * *
200 8" 269.88 *
250 10" 323.85 *
300 12" 381.00 *
PIPE CAP
STAINLESS SCHEDULE 10
AND 40 PIPE CAPS 316L
NOMINAL PIPE SIZE
SCHEDULE
10
316L
SCHEDULE
40
316L
mm INCH
15 1/2" * *
20 3/4" * *
25 1" * *
32 1 1/4" * *
40 1 1/2" * *
50 2" * *
65 2 1/2" * *
80 3" * *
100 4" * *
150 6" * *
200 8" * *
250 10" * *
300 12" *
22
BSP Pipe Fittings
Other sizes, grades and
ratings also available on
request.
*Denotes 150lb available as stock
**Denotes 3000lb also available
as stock
THREADED BARREL NIPPLE
BSP PIPE CAP
BSP PIPE CROSS
THREADED PIPE
BARREL NIPPLE 150lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8" *
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4" *
BSP PIPE CAP 150lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4" *
BSP PIPE CROSS 150lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2"
80 3"
100 4"
100 4"
THREADED PIPE SOCKET
THREADED PIPE SOCKET
150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8" *
8 1/4" **
10 3/8" **
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" **
65 2 1/2" *
80 3" *
100 4" *
23
BSP Pipe Fittings [Contd.]
Other sizes, grades and ratings also available on request.
BSP WELD NIPPLE
BSP 90 DEGREE ELBOW
BSP HEX NIPPLE
BSP 45 DEGREE ELBOW
BSP PIPE REDUCING WELD NIPPLE
BSP WELD NIPPLE 150lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8" **
8 1/4" **
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" **
65 2 1/2" *
80 3" *
100 4" *
BSP ELBOW 90 DEGREE
150/3000lb
NOMINAL PIPE SIZE
316L
mm INCH
6 1/8" *
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4" *
BSP ELBOW 45 DEGREE
150lb
NOMINAL PIPE SIZE
316L
mm INCH
6 1/8"
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4"
BSP HEX NIPPLE
150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8" **
8 1/4" **
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" **
65 2 1/2" *
80 3" *
100 4" *
BSP PIPE REDUCING
WELD NIPPLE 150 lb
NOMINAL PIPE SIZE
316
mm INCH
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4" *
*Denotes 150lb available as stock
**Denotes 3000lb also available
as stock
24
BSP Pipe Fittings [Contd.]
Other sizes, grades and ratings also available on request.
BSP STREET ELBOW BSP HOSE TAIL BSP BACK NUT
BSP TEE
BSP UNION
BSP TEE 150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8" *
8 1/4" *
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4" *
BSP UNION 150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8" *
8 1/4" *
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" **
65 2 1/2" *
80 3" *
100 4"
BSP STREET ELBOW150lb
NOMINAL PIPE SIZE
316L
mm INCH
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4"
BSP HOSE TAIL 150lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8"
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
BSP BACK NUT 150lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8"
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
*Denotes 150lb available as stock
**Denotes 3000lb also available
as stock
25
BSP Pipe Fittings [Contd.]
Other sizes, grades and ratings
also available on request.
BSP WELD PLUG BSP HEX REDUCING BUSH BSP HEX REDUCING NIPPLE
BSP PLUG 150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
6 1/8" *
8 1/4" *
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" *
65 2 1/2" *
80 3" *
100 4" *
BSP HEX REDUCING
BUSH 150lb
SIZE
316
INCH
1/4" x 1/8" *
3/8" x 1/8" *
3/8" x 1/4" *
1/2" x 1/8" *
1/2" x 1/4" **
1/2" x 3/8" *
3/4" x 1/4" **
3/4" x 3/8" **
3/4" x 1/2" **
1" x 1/4" **
1" x 3/8" *
1" x 1/2" **
1" x 3/4" **
1 1/4" x 1/2" *
1 1/4" x 3/4" *
1 1/4" x 1" **
1 1/2" x 1/2" *
1 1/2" x 3/4" *
1 1/2" x 1" *
1 1/2" x 1 1/4" *
2" x 1" *
2" x 1 1/4" *
2" x 1 1/2" **
2 1/2" x 2" *
3" x 2" *
3" x 2 1/2" *
4" x 1"
4" x 2" *
4" x 3" *
BSP HEX REDUCING
NIPPLE 150lb
SIZE
316
INCH
1/4" x 1/8 *
3/8" x 1/8" *
3/8" x 1/4" *
1/2" x 1/8" *
1/2" x 1/4" *
1/2" x 3/8" *
3/4" x 1/4" *
3/4" x 3/8" *
3/4" x 1/2" *
1" x 1/4" *
1" x 3/8" *
1" x 1/2" *
1" x 3/4" *
1 1/4" x 1/2" *
1 1/4" x 3/4" *
1 1/4" x 1" *
1 1/2" x 1/2" *
1 1/2" x 3/4" *
1 1/2" x 1" *
1 1/2" x 1 1/4" *
2" x 1" *
2" x 1 1/4" *
2" x 1 1/2" *
2 1/2" x 2"
3" x 2"
3" x 2 1/2"
4" x 1"
4" x 2"
4" x 3"
*Denotes 150lb available as stock
**Denotes 3000lb also available
as stock
26
BSP and NPT Pipe Fittings
BSP REDUCING SOCKET NPT THREADED PIPE SOCKET NPT THREADED PIPE WELD NIPPLE
NPT THREADED BARREL NIPPLE NPT THREADED TEE
NPT THREADED PIPE
SOCKET 150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" **
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" **
NPT THREADED PIPE
WELD NIPPLE 150lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
NPT THREADED PIPE
BARREL NIPPLE 150lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" *
10 3/8" *
15 1/2" *
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
NPT THREADED TEE
150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" *
10 3/8" **
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" *
40 1 1/2" **
50 2" **
BSP REDUCING
SOCKET 150lb
SIZE
316
INCH
1/4" x 1/8" *
3/8" x 1/8" *
3/8" x 1/4" *
1/2" x 1/8" *
1/2" 1/4" *
1/2" x 3/8" **
3/4" x 1/4" *
3/4" x 3/8" *
3/4" x 1/2" *
1" x 1/4" *
1" x 3/8" *
1" x 1/2" *
1" x 3/4" *
1 1/4" x 1/2" *
1 1/4" x 3/4" *
1 1/4" x 1" *
1 1/2" x 1/2" *
1 1/2" x 3/4" *
1 1/2" X 1" *
1 1/2" x 1 1/4" *
2" x 1" *
2" x 1 1/4" *
2" x 1 1/2" *
2 1/2" x 2" *
3" x 2"
3" x 2 1/2"
4" x 1"
4" x 2"
4" x 3"
*Denotes 150lb available as stock **Denotes 3000lb also available as stock
27
NPT Pipe Fittings [Contd.]
NPT UNION
NPT HEX NIPPLE
SOCKET WELD ELBOW SOCKET WELD TEE
SOCKET WELD UNION
SOCKET WELD COUPLING
NPT PLUG NPT 90 DEGREE ELBOW
NPT UNION 150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" *
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" *
40 1 1/2" **
50 2" **
NPT HEX NIPPLE
150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" **
10 3/8" **
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" **
SOCKET WELD
3000lb FITTINGS
NOMINAL PIPE SIZE
mm INCH
15 1/2"
20 3/4"
25 1"
32 1 1/4"
40 1 1/2"
50 2"
NPT PLUG 150/3000lb
NOMINAL PIPE SIZE
316
mm INCH
8 1/4" **
10 3/8" **
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" **
NPT 90 DEGREE ELBOW
150/3000lb
NOMINAL PIPE SIZE
316L
mm INCH
8 1/4" *
10 3/8" *
15 1/2" **
20 3/4" **
25 1" **
32 1 1/4" **
40 1 1/2" **
50 2" * Other sizes, grades and ratings
also available on request.
A range of 3000lb
ttings are available -
please contact your
nearest branch for details.
*Denotes 150lb available as stock
**Denotes 3000lb also available
as stock
28
Tube and Pipe Clamping Options
STANDARD TUBE HANGER
2 PIECE SADDLE CLAMP
KLEANFLOW M BRACKET
BOSSED HANGER
HYGIENIC HANGERS PP TYPE
SIZE STANDARD PP TYPE BOSSED M10 BOSSED 5/8 SLIDE MOUNT
TUBE PIPE OD NB OD NB OD OD
1/2" 15NB * * * *
3/4" 20NB * * * *
1" 25NB * * * * *
1 1/4" 32NB * * * * *
1 1/2" 40NB * * * * *
2" 50NB * * * * *
2 1/2" 65NB * * * * *
3" 80NB * * * * *
4" 100NB * * * * *
2 PIECE SADDLE CLAMPS
SIZE AVAILABILITY
TUBE PIPE OD NB
1/2" 15NB *
3/4" 20NB *
1" 25NB
1 1/4" 32NB
1 1/2" 40NB
2" 50NB * *
2 1/2" 65NB *
3" 80NB * *
4" 100NB * *
5" 125NB * *
6" 150NB * *
8" 200NB * *
10" 250NB * *
12" 300NB * *
KLEANFLOW M BRACKETS
SIZE AVAILABILITY
TUBE PIPE OD NB
1/2" 15NB * *
3/4" 20NB * *
1" 25NB * *
1 1/4" 32NB * *
1 1/2" 40NB * *
2" 50NB * *
2 1/2" 65NB * *
3" 80NB * *
4" 100NB * *
5" 125NB *
6" 150NB * *
8" 200NB * *
10" 250NB * *
12" 300NB * *
Mounting brackets are available to suit above hangers (M10, 5/8 UNC)
Bosses: M10, 5/8 available individually.
Grade 316 available upon request.
Threaded rod available ex stock.
Grade 316 available upon request.
* Denotes normal stock items.
Other sizes available on request.
29
Camlocks
TYPE A CAMLOCK
TYPE DP CAMLOCK
TYPE C CAMLOCK
TYPE E CAMLOCK
TYPE D CAMLOCK
TYPE F CAMLOCK
We stock a range of Camlock 316 Stainless fttings from 3/4 to 4.
30
Technical Data Butt Weld Fittings
90 DEGREE ELBOWS
LONG RADIUS
90 DEGREE ELBOWS
SHORT RADIUS
45 DEGREE ELBOWS
LONG RADIUS
180 DEGREE ELBOWS
SHORT RADIUS
ELBOWS [MADE TO ANSI B16.9 AND ASTM A403 SPECIFICATIONS]
NOMINAL PIPE SIZE
OUTSIDE
DIAMETER
O.D mm
CENTRE TO
FACE [A]
mm
CENTRE TO
FACE [D]
mm
CENTRE TO
FACE [B]
mm
BACK TO
FACE [K]
mm
mm INCHES
15 0.5 21.34 38.10 25.4 15.88 47.63
20 0.75 26.67 28.58 19.05 11.11 42.86
25 1 33.40 38.10 25.40 22.23 55.56
32 1.25 42.16 47.63 31.75 25.40 69.85
40 1.5 48.26 57.15 38.10 28.58 82.55
50 2 60.33 76.20 50.80 34.93 106.36
65 2.5 73.03 95.25 63.50 44.45 131.76
80 3 88.90 114.30 76.20 50.80 158.75
90 3.5 101.60 133.35 88.90 57.15 184.15
100 4 114.30 152.40 101.60 63.50 209.55
125 5 141.30 190.50 127.00 79.38 261.94
150 6 168.28 228.60 152.40 95.25 312.74
200 8 219.08 304.80 203.20 127.00 414.34
250 10 273.05 381.00 254.00 158.75 517.53
300 12 323.85 457.20 304.80 190.50 619.13
350 14 355.60 533.40 355.60 222.25 740.68
400 16 406.40 609.60 406.40 254.00 886.09
450 18 457.20 685.80 457.20 285.75 1060.04
500 20 568.00 762.00 508.00 317.50 1268.04
600 24 609.60 914.40 609.60 381.00 1814.80
31
Technical Data Butt Weld Fittings
STRAIGHT TEES CAPS STRAIGHT CROSSES
STRAIGHT TEES, CAPS AND STRAIGHT CROSSES
[MADE TO ANSI B16.9 AND ASTM A403 SPECIFICATIONS]
NOMINAL PIPE SIZE
OUTSIDE
DIAMETER
O.D mm
CENTRE TO
END [C]
mm
LENGTH [E]
mm
CENTRE TO
END [C]
mm
mm INCHES
15 0.5 21.34 25.40 25.40 25.40
20 0.75 26.67 28.58 25.40 25.40
25 1 33.44 38.10 38.10 38.10
32 1.25 42.16 47.63 38.10 47.63
40 1.5 48.26 57.15 38.10 57.15
50 2 60.33 63.50 38.10 63.50
65 2.5 73.03 76.20 38.10 78.20
80 3 88.90 85.73 50.80 85.73
90 3.5 101.60 95.25 63.50 95.25
100 4 114.30 104.78 63.50 104.78
125 5 141.30 123.83 76.20 123.83
150 6 168.28 142.88 88.90 142.88
200 8 219.08 177.81 101.64 177.80
250 10 273.05 215.90 127.00 215.90
300 12 323.85 254.00 152.40 254.00
350 14 355.60 279.40 165.10 279.40
400 16 406.40 304.80 177.80 304.80
450 18 457.20 342.90 203.20 342.90
500 20 508.00 381.00 228.60 381.00
600 24 609.60 431.80 266.70 431.80
32
Technical Data Butt Weld Fittings
STUB ENDS [MADE TO ANSI B16.9 AND ASTM A403 SPECIFICATIONS]
NOMINAL PIPE SIZE
OUTSIDE
DIAMETER
O.D mm
DIAMETER
[G]
mm
LENGTH
[F]
mm
RADIUS
[R]
mm
mm INCHES
15 0.5 21.34 35.05 50.80 3.05
20 0.75 26.67 42.93 50.80 3.05
25 1 33.40 50.80 50.80 3.05
32 1.25 42.16 63.50 50.80 4.83
40 1.5 48.26 73.15 50.80 6.35
50 2 60.33 91.95 63.50 7.87
65 2.5 73.03 104.65 63.50 7.87
80 3 88.90 127.00 63.50 9.65
90 3.5 101.60 139.70 76.20 9.65
100 4 114.30 157.23 76.20 11.18
125 5 141.30 185.67 76.20 11.18
150 6 168.28 215.90 88.90 12.70
200 8 219.08 269.75 101.60 12.70
250 10 273.05 323.85 127.00 12.70
300 12 323.85 381.00 152.40 12.70
350 14 355.60 412.75 152.40 12.70
400 16 406.40 469.90 152.40 12.70
450 18 457.20 533.40 152.40 12.70
500 20 568.00 584.20 152.40 12.70
STUB ENDS [MSS SP-43] SERATED FACE IN ACCORDANCE WITH MSS SP-6
F
33
Technical Data BSP Threaded Class 150Fittings
BSP ELBOWS AND TEES
[MADE TO BS21 AND ASTM A312 SPECIFICATIONS]
NOMINAL PIPE SIZE
90 DEGREE
ELBOW
TEE
45 DEGREE
ELBOW
mm INCHES A mm A mm B mm
6 0.125 21 21 18
8 0.25 21 21 18
10 0.375 24 24 20
15 0.5 28 28 22
20 0.75 33 33 25
25 1 38 38 28
32 1.25 44 34 33
40 1.5 49 49 36
50 2 57 57 43
65 2.5 69 69 50
80 3 78 78 55
100 4 96 96 66
BSP UNIONS AND REDUCING BUSHES [MADE TO BS21 AND ASTM A312 SPECIFICATIONS]
NOMINAL PIPE SIZE UNION REDUCING BUSHES
mm INCHES C mm L mm S
1
[HEX] mm S
2
[HEX] mm B mm C mm REDUCING SIZE NB
6 0.125 17 30 26
8 0.25 20 34 32 6
10 0.375 25 37 38 19 18 8
15 0.5 29 40 41 23 21 10 + 8
20 0.75 36 43 50 29 24 15 + 10 + 8
25 1 41 51 59 59 35 27 20 + 15 + 10 + 8
32 1.25 50 55 69 46 30 25 + 20 + 15
40 1.5 49 56 59 78 50 32 + 25 + 20 + 15
50 2 69 66 93 63 36 40 + 32 + 25 + 20
65 2.5 86 83 112 80 39 50 + 40 + 32 + 25
80 3 99 92 127 95 44 65 + 50 + 40 + 32
100 4 127 113 158 120 51 80 + 65 + 50 + 40
90 DEGREE ELBOW
TEE
45 DEGREE ELBOW
UNION REDUCING BUSHES
34
Technical Data BSP Threaded Class 150Fittings
BSP SQUARE HEAD PLUGS, HEX HEAD PLUGS AND NIPPLES
[MADE TO BS21 AND ASTM A312 SPECIFICATIONS]
NOMINAL PIPE SIZE SQUARE HEAD PLUG HEXAGON HEAD PLUG HEXAGON NIPPLE
mm INCHES B mm A mm BB mm AA mm B mm L mm
8 0.25 9 18 14 19 14 34
10 0.375 12 21 19 22 19 36
15 0.5 14 25 23 24 23 42
20 0.75 17 27 29 27 29 47
25 1 19 32 35 30 35 52
32 1.25 23 35 46 34 46 56
40 1.5 26 37 50 37 50 60
50 2 32 41 63 41 63 66
65 2.5 41 48 80 73
80 3 46 51 95 81
100 4 58 58 120 92
BSP SOCKETS [MADE TO BS21 AND ASTM A312 SPECIFICATIONS]
NOMINAL PIPE SIZE SOCKETS REDUCING SOCKETS
mm INCHES C mm L mm B mm AA mm
8 0.25 17 25 19 29
10 0.375 21 26 22 30
15 0.5 25 34 27 38
20 0.75 31 36 33 40
25 1 38 43 40 45
32 1.25 47 48 49 51
40 1.5 54 48 56 54
50 2 66 56 68 64
SQUARE HEAD PLUG HEXAGON HEAD PLUG HEXAGON NIPPLE
SOCKETS
REDUCING SOCKETS
35
Technical Data BSP Threaded Class 150Fittings
BSP BARREL AND WELD NIPPLES
[MADE TO BS21 AND ASTM A312 SPECIFICATIONS]
NOMINAL PIPE SIZE
BARREL
NIPPLES
WELD
NIPPLES
mm INCHES L mm L mm
6 0.125 20 20
8 0.25 26 26
10 0.375 28 28
15 0.5 34 34
20 0.75 38 38
25 1 44 44
32 1.25 50 50
40 1.5 50 50
50 2 58 58
65 2.5 70 70
80 3 78 78
100 4 90 90
BSP CROSS, STREET ELBOWAND CAP
[MADE TO BS21 AND ASTM A312 SPECIFICATIONS]
NOMINAL PIPE SIZE CROSS STREET ELBOW CAP
mm INCHES A mm A mm B mm H mm R mm
8 0.25 21 21 35 18
10 0.375 24 24 37 19
15 0.5 28 28 41 22
20 0.75 33 33 48 25
25 1 38 38 54 29
32 1.25 49 49 68 32 150
40 1.5 49 49 68 32 170
50 2 57 57 83 36 215
65 2.5 42 269
80 3 45 310
100 4 55 404
BARREL NIPPLES
WELD NIPPLES
CROSS STREET ELBOW CAP
36
Technical Data BSP Threaded Class 150Fittings
BSP REDUCING NIPPLE [MADE TO BS21 AND ASTM A312 SPECIFICATIONS]
NOMINAL PIPE SIZE REDUCING NIPPLE
mm INCHES E
1
mm E
2
mm E
2
mm E
2
mm
REDUCING SIZE
mm
8 0.25 12 10 0.125
10 0.375 13 12 0.25
15 0.5 16 13 12 0.375 * 0.25
20 0.75 18 16 13 0.5 * 0.375
25 1 20 18 16 13 0.75 * 0.5 * 0.375
32 1.25 22 20 18 16 1 * 0.75 * 0.5
40 1.5 23 22 20 18 1.25 * 1 * 0.75
50 2 25 23 22 20 1.5 * 1.25 * 1
REDUCING NIPPLE
BRITISH STANDARD THREADS (BSP)
NOMINAL PIPE SIZE
OUTSIDE
DIAMETER OF
S/S PIPE
NUMBER OF
THREADS
PER INCH
PITCH
DEPTH OF
THREAD
DIAMETER
AT GUAGE
PLANE
[GUAGE DIA.]
DISTANCE OF
GUAGE
DIAMETER
[GUAGE LENGTH]
LENGTH OF
USEFUL THREAD
mm INCHES D mm h E L
1
L
2
6 0.125 0.405 28 0.03571 0.0229 0.383 0.1563 0.2545
8 0.25 0.540 19 0.05263 0.0337 0.518 0.2367 0.3314
10 0.375 0.675 19 0.05263 0.0337 0.656 0.2500 0.3940
15 0.5 0.840 14 0.07143 0.0457 0.825 0.3214 0.5178
20 0.75 1.050 14 0.07143 0.0457 1.041 0.3750 0.5714
25 1 1.315 11 0.09091 0.0582 1.309 0.4091 0.6591
32 1.25 1.660 11 0.09091 0.0582 1.650 0.5000 0.7500
40 1.5 1.900 11 0.09091 0.0582 1.882 0.5000 0.7500
50 2 2.375 11 0.09091 0.0582 2.347 0.6250 0.9204
65 2.5 2.875 11 0.09091 0.0582 2.950 0.6875 1.0511
80 3 3.500 11 0.09091 0.0582 3.450 0.8125 1.1761
100 4 4.500 11 0.09091 0.0582 4.450 1.0000 1.4091
125 5 5.563 11 0.09091 0.0582 5.450 1.1250 1.5795
150 6 6.625 11 0.09091 0.0582 6.450 1.1250 1.5795
REDUCING NIPPLE
BRITISH STANDARD THREADS (BSP)
TAPER 1 IN 16 ON DIAGRAM (SHOWN EXAGGERATED IN DIAGRAM)
TAPER:
H = 0.960237xp
h = 0.610327xp
r = 0.127278xp
37
Technical Data NPT Dimensions of Pipe Threads
AMERICAN STANDARD THREADS
NOMINAL PIPE SIZE
OUTSIDE
DIAMETER OF
S/S PIPE
NUMBER OF
THREADS
PER INCH
PITCH HAND-TIGHT
EFFECTIVE
ENGAGE-
MENT
EXTERNAL
THREAD
LENGTH
DEPTH
mm INCHES D n P L
1
E
1
L
2
h
6 0.125 0.405 27 0.03704 0.180 0.37476 0.2639 0.02963
8 0.25 0.540 18 0.05556 0.200 0.48989 0.4018 0.04444
10 0.375 0.675 18 0.05556 0.240 0.62701 0.4078 0.04444
15 0.5 0.840 14 0.07143 0.320 0.77843 0.5337 0.05714
20 0.75 1.050 14 0.07143 0.339 0.98887 0.5457 0.05714
25 1 1.315 11.5 0.08696 0.400 1.23863 0.6828 0.06957
32 1.25 1.660 11.5 0.08696 0.420 1.56338 0.7068 0.06957
40 1.5 1.900 11.5 0.08696 0.420 1.82234 0.7235 0.06957
50 2 2.375 11.5 0.08696 0.436 2.29627 0.7665 0.06957
65 2.5 2.875 8 0.12500 0.682 2.76216 1.1375 0.10000
80 3 3.500 8 0.12500 0.766 3.8850 1.2000 0.10000
90 3.5 4.000 8 0.12500 0.821 3.88881 1.2500 0.10000
100 4 4.500 8 0.12500 0.844 4.38712 1.3000 0.10000
125 5 5.563 8 0.12500 0.937 5.44929 1.4063 0.10000
150 6 6.625 8 0.12500 0.958 6.50597 1.5121 0.10000
AMERICAN STANDARD THREADS
STRAIGHT PIPE THREADS: THE PITCH, ANGLE AND DEPTH OF
THREAD ARE THE SAME AS THE CORRESPONDING DIMENSIONS OF
THE TAPER PIPE THREADS
TAPER:
L2 = (0.8D 6.8) 1/n
38
Flange Technical Data
STAINLESS STEEEL FLANGE TABLES
NOMINAL
PIPE SIZE
NB
NOMINAL
PIPE SIZE
INCHES
SPECIFICATION
PRESSURE
RATING
FLANGE
DIAMETER
mm
THICKNESS
mm
NUMBER
OF BOLTS
DRILLING BOLT PCD
25 1
ANSI B16.5 CL 150 108 11.5 4 16 79.4
BS 4504 PN 10 115 18 4 14 85
BS 10 TE 114 9 4 14 82
ASA2129 TE 115 7 4 14 83
32 1.25
ANSI B16.5 CL 150 117 13 4 16 88.9
BS 4504 PN 10 140 18 4 18 100
BS 10 TE 120 12 4 14 87
ASA2129 TE 120 8 4 14 87
40 1.5
ANSI B16.5 CL 150 127 14.5 4 16 98.4
BS 4504 PN 10 150 18 4 18 110
BS 10 TE 133 12 4 14 98
ASA2129 TE 135 9 4 14 98
50 2
ANSI B16.5 CL 150 152 16 4 20 120.6
BS 4504 PN 10 165 20 4 18 125
BS 10 TE 152 14 4 17 114
ASA2129 TE 150 10 4 18 114
65 2.5
ANSI B16.5 CL 150 178 17.5 4 20 139.7
BS 4504 PN 10 185 18 4 18 145
BS 10 TE 165 14 4 17 127
ASA2129 TE 165 10 4 18 127
80 3
ANSI B16.5 CL 150 191 19.5 4 20 152.4
BS 4504 PN 10 200 20 8 18 160
BS 10 TE 184 14 4 17 146
ASA2129 TE 185 11 4 18 146
100 4
ANSI B16.5 CL 150 229 24 8 20 190.5
BS 4504 PN 10 220 20 8 18 180
BS 10 TE 216 17 8 17 178
ASA2129 TE 215 13 8 18 178
150 6
ANSI B16.5 CL 150 279 25.5 8 23 241.3
BS 4504 PN 10 285 22 8 22 240
BS 10 TE 279 17 8 22 235
ASA2129 TE 280 17 8 22 235
200 8
ANSI B16.5 CL 150 343 29 8 23 298.4
BS 4504 PN 10 340 24 8 22 295
BS 10 TE 336 19 8 22 292
ASA2129 TE 335 19 8 22 292
250 10
ANSI B16.5 CL 150 406 30.5 12 26 361.9
BS 4504 PN 10 395 26 12 22 350
BS 10 TE 406 22 12 22 355
ASA2129 TE 405 22 12 22 356
39
Forged and Machined Flanges
MACHINED FLANGES TABLE D AND E
TO SUIT BS10 TABLE D BS10 TABLE E
TUBE PIPE TUBE PIPE TUBE PIPE BLIND
1/2" 15NB * * *
3/4" 20NB * * *
1" 25NB * * *
1 1/4" 32NB * * * *
1 1/2" 40NB * * * *
2" 50NB * * *
2 1/2" 65NB * * * *
3" 80NB * * * *
4" 100NB * * * * *
5" 125NB * *
6" 150NB * * * * *
8" 200NB * * *
10" 250NB * *
12" 300NB
FORGED FLANGES ANSI 150
TO SUIT SLIP ON
BLIND
316
WELD NECK
316
TUBE PIPE 316 TUBE 316 PIPE
1/2" 15NB * * *
3/4" 20NB * * *
1" 25NB * * * *
1 1/4" 32NB * * *
1 1/2" 40NB * * *
2" 50NB * * * *
2 1/2" 65NB * * * *
3" 80NB * * * *
4" 100NB * * * *
5" 125NB
6" 150NB * * * *
8" 200NB * * *
10" 250NB * *
10" 250NB *
12" 300NB * *
Other sizes and drill patterns are available on request.
Fastenings available ex stock.
* Denotes normal stock items
SLIP ON FLANGE
BLIND FLANGE
WELD NECK FLANGE
MACHINED FLANGES
GALVANISED FLANGES
40
Forged and Machined Flanges [Contd.]
FORGED FLANGES
SLIP ON ANSI 300 316
NOMINAL PIPE SIZE
TYPE
316
mm INCH
20 3/4" *
25 1" *
32 1 1/4" *
40 1 1/2" *
50 2" *
65 2 1/2" *
80 3" *
100 4" *
SLIP ON FLANGE
GALVANISED BACK UP FLANGE NECK RING
FLANGE NECK RINGS
TO SUIT
INCHES
WALL
THICKNESS
1.5.mm
WALL
THICKNESS
2.0mm
WALL
THICKNESS
3.0mm
WALL
THICKNESS
4.0mm
WALL
THICKNESS
5.0mm
GALVANISED BACK
UP FLANGES
TABLE E. SIZES
AVAILABLE
OD NB
19.00 20 3/4" *
25.40 25 1" * * *
31.80 32 1 1/4" * * * *
38.10 40 1 1/2" * * * *
50.80 50 2" * * * *
63.50 65 2 1/2" * * * *
76.20 80 3" * * * *
101.60 100 4" * * * *
127.00 125 5" * * *
152.40 150 6" * * * * *
203.20 200 8" * * * *
254.00 250 10" * * *
304.80 300 12" * * *
355.60 350 14" * * *
406.40 400 16" * * *
457.20 450 18" * * *
508.00 500 20" * *
609.60 600 24" * *
Other sizes and drill patterns are available on request.
Fastenings available ex stock.
* Denotes normal stock items
41
Victaulic Presst Systems
VICTAULIC PRESSFIT PIPING SYSTEM
FASTER, SAFER and MORE ECONOMICAL
Victaulic Stainless Steel PrHVVW6ystem offers
economy, speed and reliability for joining small
diameter pipe for industrial processes and utilities,
re protection, heating/air conditioning and many
other services.
The system incorporates Schedule 5 pipe in 304L
or 316L stainless steel pipe from 1/2 (12.7mm) to 2
(50.8mm) pipe with a system of PrHVVWFouplings,
elbows, tees, reducers, adapters, and valves.
No removal of pipe material.
Flame free, no fire hazard.
Lighter, and no bolts means no alignment problems.
Pressure rated to 300 psi (2065 kPa) for general services.
Reduce project days; shorter planned outages.
BENEFITS
PERFORMANCE
For more information please contact your nearest Steel and Tube Stainless
branch or refer to the Victaulic website www.victaulic.com
42
Victaulic Roll Formed Pipe Systems
VICTAULIC GROOVED PIPING SYSTEM
The only system that provides the option of either rigidity or fexibility.
PRODUCT DESCRIPTION
The Victaulic grooved piping system is the most versatile, economical and
reliable piping system available. It is up to three times faster to install than
welding, easier and more reliable than threading or fanging, resulting in lower
total installed cost.
The system is designed for roll grooved or cut grooved standard pipe or roll
grooved light wall pipe. Pipe end preparation is fast and easy either in the shop
or on the job site, with a variety of Victaulic grooving tools available.
In addition to speed and ease of assembly, the Victaulic system offers varied
mechanical benefts to the designer, installer and owner. With the introduction of
Zero-Flex
products are
also available - please contact
your nearest branch for details.
PIPETITE STANDARD
SIZE
DIMENSIONS mm
A B C D
0-25 30 57 70 52
0-65 64 91 106 60
0-95 100 128 147 78
70-135 140 168 187 64
100-180 180 213 237 84
PIPETITE PIPE N PIPE
SIZE
DIMENSIONS mm
A B C D
25 x 0-20 - - - -
65 x 0-50 - - - -
100 x 0-75 90 - 102 112
150 x 0-135 141 - 153 150
200 x 0-180 - - - -
PIPETITE REBOOT
SIZE
DIMENSIONS mm
A B C D
0-65 - - - -
0-95 100 128 147 78
70-135 140 168 187 64
100-180 180 213 237 84
165-380 434 467 490 200
PIPETITE GROMMET
SIZE
DIMENSIONS mm
A B C D
0-25 48 36 1.2 - 3.0 45
0-65 82 70 1.2 - 3.0 57
0-95 120 106 1.2 - 3.0 75
70-135 160 146 1.2 - 3.0 61
100-180 202 186 1.2 - 3.0 77
PIPETITE
L=6C<6G:>
BIB6JC<6CJ>
I6JG6C<6
GDIDGJ6
C6E>:G
I>B6GJ
9JC:9>C
>CK:G86G<>AA
<>H7DGC:
6J8@A6C9
8=G>HI8=JG8=
=JII8>IN
=6B>AIDC
C:LEANBDJI=
E6AB:GHIDCCDGI=
C:AHDC