Sol

The photochemical behavior of oxyfluorfen [2-chloro-1-(3-etoxy-4-nitrophenoxy)-4-(trifluoromethyl) benzene] on two Greek soils was investigated. Soils were sampled from Nea Malgara and Preveza regions, characterized by a different organic matter content. Soils were spiked with the diphenyl-ether herbicide and irradiation experiments were performed either in the laboratory with a solar simulator (xenon lamp) or outside, under natural sunlight irradiation; other soil samples were kept in the dark to control the retention reaction. Kinetic parameters of both retention and photochemical reactions were calculated using zero-, first- and second- (Langmuir-Hinshelwood) order equations, and best fit was checked through statistical analysis. The soil behaviors were qualitatively similar but quantitatively different, with the soil sampled from the Nea Malgara region much more sorbent as compared with Preveza soil. All studied reactions followed second-order kinetics and photochemical reaction...

Polyaromatic hydrocarbons (PAHs) are major and recalcitrant pollutants of the environment and their removal presents a significant problem. Phytoremediation has shown much promise in PAH removal from contaminated soil, but may be inhibited because the plant experiences phytotoxic effects from low-molecular-weight PAHs such as naphthalene. This paper describes the construction of a naphthalene-degrading endophytic strain designated Pseudomonas putida VM1441(pNAH7). This strain was found to be an efficient colonizer of plants, colonizing both the rhizosphere and interior root tissues. The inoculation of plants with P. putida VM1441(pNAH7) resulted in the protection of the host plant from the phytotoxic effects of naphthalene. When inoculated plants were exposed to naphthalene, both seed germination and plant transpiration rates were higher than those of the uninoculated controls. The inoculation of plants with this strain also facilitated higher (40%) naphthalene degradation rates compared with uninoculated plants in artificially contaminated soil.

A sequential arsenic extraction method was developed that yielded extraction efficiencies (EE) that were approximately double those using current methods for terrestrial plants. The method was applied to plants from two arsenic contaminated sites and showed potential for risk assessment studies. In the method, plants were extracted first by 1:1 water-methanol followed by 0.1M hydrochloric (HCl) acid. Total arsenic in plant and soil samples collected from contaminated sites was mineralized by acid digestion and detected by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and hydride generation-atomic absorption spectrometry (HG-AAS). Arsenic speciation was done by high performance liquid chromatography coupled with HG-AAS (HPLC-HGAAS) and by HPLC coupled with ICP-mass spectrometry (HPLC-ICP-MS). Spike recovery experiments with arsenite (As(III)), arsenate (As(V)), methylarsonic acid (MA) and dimethylarsinic acid (DMA) showed stability of the species in the extraction...