|
1.
|
From manufacture to assembly of the ITER central solenoid
/ Libeyre, P (BIAM, St Paul lez Durance) ; Schild, T (BIAM, St Paul lez Durance) ; Bruton, A (BIAM, St Paul lez Durance) ; Cormany, C (BIAM, St Paul lez Durance) ; Dolgetta, N (BIAM, St Paul lez Durance) ; Gaxiola, E (BIAM, St Paul lez Durance) ; Jong, C (BIAM, St Paul lez Durance) ; Mitchell, N (BIAM, St Paul lez Durance) ; Evans, D (BIAM, St Paul lez Durance) ; Levesy, B (BIAM, St Paul lez Durance) et al.
The Central Solenoid (CS), a key component of the ITER Magnet system, using a 45 kA Nb 3 Sn conductor, includes six identical coils, called modules, to form a solenoid, enclosed inside a structure providing vertical pre-compression and mechanical support. Procurement of the components of the ITER CS is the responsibility of US ITER, the US Domestic Agency (USDA), while the assembly of these components will be carried out by the ITER Organization (IO). [...]
2019 - 4 p.
- Published in : Fusion Eng. Des. 146 (2019) 437-440
|
|
|
2.
|
|
|
3.
|
Commissioning of the CMS Magnet
/ Campi, D (CERN) ; Curé, B (CERN) ; Gaddi, A (CERN) ; Gerwig, H (CERN) ; Hervé, A (CERN) ; Klyukhin, V (CERN) ; Maire, G (CERN) ; Perinic, G (CERN) ; Brédy, P (CEA/DAPNIA Saclay, France) ; Fazilleau, P (CEA/DAPNIA Saclay, France) et al.
CMS (Compact Muon Solenoid) is one of the large experiments for the LHC at CERN. The superconducting magnet for CMS has been designed to reach a 4 T field in a free bore of 6 m diameter and 12.5 m length with a stored energy of 2.6 GJ at full current. [...]
2007
- Published in : IEEE Trans. Appl. Supercond. 17 (2007) 1185-1190
IEEE Published version, local copy: PDF;
|
|
|
4.
|
Assembly Concept and Technology of the ATLAS Barrel Toroid
/ Foussat, A (CERN) ; ten Kate, H H J (CERN) ; Levesy, B (CEA DSM/ DAPNIA, Gif-sur-Yvette Cedex) ; Mayri, C (CEA DSM/ DAPNIA, Gif-sur-Yvette Cedex) ; Pabot, Y (CEA DSM/ DAPNIA, Gif-sur-Yvette Cedex) ; Petrov, V (CERN) ; Raymond, M (Marseille, CPPM) ; Sun, Z (CEA DSM/ DAPNIA, Gif-sur-Yvette Cedex) ; Védrine, P (CEA DSM/ DAPNIA, Gif-sur-Yvette Cedex)
2006
- Published in : IEEE Trans. Appl. Supercond. 16 (2006) 565-569
IEEE Published version, local copy: PDF;
|
|
|
5.
|
Completion of the Manufacturing of the ATLAS Barrel Toroid Magnet at CERN
/ Védrine, P (CEA Saclay, DSM/DAPNIA, Gif-sur-Yvette, France) ; Rey, J M (CEA Saclay, DSM/DAPNIA, Gif-sur-Yvette, France) ; Volpini, G (INFN Milano) ; Alessandria, F (INFN Milano) ; Arnaud, M (CEA Saclay, DSM/DAPNIA, Gif-sur-Yvette, France) ; Berriaud, C (CEA Saclay, DSM/DAPNIA, Gif-sur-Yvette, France) ; Carty, M (CEA Saclay, DSM/DAPNIA, Gif-sur-Yvette, France) ; Dudarev, A (CERN) ; Levesy, B (CEA Saclay, DSM/DAPNIA, Gif-sur-Yvette, France) ; Mayri, C (CEA Saclay, DSM/DAPNIA, Gif-sur-Yvette, France) et al.
2006
- Published in : IEEE Trans. Appl. Supercond. 16 (2006) 504-507
IEEE Published version, local copy: PDF;
|
|
|
6.
|
The control on the deformation of the ATLAS barrel toroid warm structure
/ Bauer, F (CEA Saclay, DAPNIA, Gif sur Yvette, France) ; Foussat, A (CERN) ; Giraud, P F (CEA Saclay, DAPNIA, Gif sur Yvette, France) ; Védrine, P (CEA Saclay, DAPNIA, Gif sur Yvette, France) ; Guyot, C (CEA Saclay, DAPNIA, Gif sur Yvette, France) ; Levesy, B (CEA Saclay, DAPNIA, Gif sur Yvette, France) ; Ponsot, P (CEA Saclay, DAPNIA, Gif sur Yvette, France) ; Schune, P (CEA Saclay, DAPNIA, Gif sur Yvette, France) ; Sun, Z (CEA Saclay, DAPNIA, Gif sur Yvette, France)
The ATLAS barrel toroid warm structure supports the barrel toroid and the muon detectors. The warm structure is about 26 meters long with an outer diameter of 20 meters. [...]
2007
- Published in : Nucl. Instrum. Methods Phys. Res., A 572 (2007) 145-148
In : 10th Pisa Meeting on Advanced Detectors : Frontier Detectors For Frontier Physics, La Biodola, Italy, 21 - 27 May 2006, pp.145-148
|
|
|
7.
|
10.1088/0954-3899/34/6/S01
|
|
8.
|
|
|
9.
|
|
|
10.
|
|