|
1.
|
From manufacture to assembly of the ITER central solenoid
/ Libeyre, P (BIAM, St Paul lez Durance) ; Schild, T (BIAM, St Paul lez Durance) ; Bruton, A (BIAM, St Paul lez Durance) ; Cormany, C (BIAM, St Paul lez Durance) ; Dolgetta, N (BIAM, St Paul lez Durance) ; Gaxiola, E (BIAM, St Paul lez Durance) ; Jong, C (BIAM, St Paul lez Durance) ; Mitchell, N (BIAM, St Paul lez Durance) ; Evans, D (BIAM, St Paul lez Durance) ; Levesy, B (BIAM, St Paul lez Durance) et al.
The Central Solenoid (CS), a key component of the ITER Magnet system, using a 45 kA Nb 3 Sn conductor, includes six identical coils, called modules, to form a solenoid, enclosed inside a structure providing vertical pre-compression and mechanical support. Procurement of the components of the ITER CS is the responsibility of US ITER, the US Domestic Agency (USDA), while the assembly of these components will be carried out by the ITER Organization (IO). [...]
2019 - 4 p.
- Published in : Fusion Eng. Des. 146 (2019) 437-440
|
|
|
2.
|
Manufacture of the ITER Central Solenoid Components
/ Libeyre, Paul (Euratom, St. Paul Lez Durance) ; Cormany, Carl (Euratom, St. Paul Lez Durance) ; Dolgetta, Nello (Euratom, St. Paul Lez Durance) ; Gaxiola, Enrique (Euratom, St. Paul Lez Durance) ; Jong, Cornelis (Euratom, St. Paul Lez Durance) ; Lyraud, Charles (Euratom, St. Paul Lez Durance) ; Mitchell, Neil (Euratom, St. Paul Lez Durance) ; Journeaux, Jean-Yves (Euratom, St. Paul Lez Durance) ; Pearce, Robert (Euratom, St. Paul Lez Durance) ; Evans, David (Euratom, St. Paul Lez Durance) et al.
The ITER central solenoid (CS) components are currently being manufactured. This Nb$_{3}$Sn superconducting magnet will provide the magnetic flux swing required to induce up to 15 MA as plasma current. [...]
2018
- Published in : IEEE Trans. Appl. Supercond. 28 (2018) 4200805
In : 25th International Conference on Magnet Technology, Amsterdam, The Netherlands, 27 Aug - 1 Sep 2017, pp.4200805
|
|
|
3.
|
Qualification of the Manufacturing Procedures of the ITER Correction Coils
/ Libeyre, P (Euratom, St. Paul Lez Durance) ; Cormany, C (Euratom, St. Paul Lez Durance) ; Dolgetta, N (Euratom, St. Paul Lez Durance) ; Gaxiola, E (Euratom, St. Paul Lez Durance) ; Ilyin, Y (Euratom, St. Paul Lez Durance) ; Mitchell, N (Euratom, St. Paul Lez Durance) ; Simon, F (Euratom, St. Paul Lez Durance) ; Evans, D (Euratom, St. Paul Lez Durance) ; Sgobba, S (CERN) ; Langeslag, S A E (CERN) et al.
The system of correction coils (CC) is a component of the ITER magnet system, required to correct toroidal asymmetries and reduce error magnetic fields detrimental for physical processes in the plasma. It includes 18 coils, inserted in between toroidal field coils and poloidal field coils and split into 3 sets of 6 coils each: bottom correction coils (BCC), side correction coils (SCC), and top correction coils (TCC). [...]
2017 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 27 (2017) 4201405
|
|
|
4.
|
Starting Manufacture of the ITER Central Solenoid
/ Libeyre, P (ITER, France) ; Cormany, C (ITER, France) ; Dolgetta, N (ITER, France) ; Gaxiola, E (ITER, France) ; Jong, C (ITER, France) ; Lyraud, C (ITER, France) ; Mitchell, N (ITER, France) ; Journeaux, J Y (ITER, France) ; Vollmann, T (ITER, France) ; Evans, D (ITER, France) et al.
The central solenoid (CS) is a key component of the ITER magnet system to provide the magnetic flux swing required to drive induced plasma current up to 15 MA. The manufacture of its different subcomponents has now started, following completion of the design analyses and achievement of the qualification of the manufacturing procedures. [...]
2016 - 5 p.
- Published in : IEEE Trans. Appl. Supercond. 26 (2016) 4203305
In : 24th International Conference on Magnet Technology, Seoul, Korea, 18 - 23 Oct 2015, pp.4203305
|
|
|
5.
|
The Laser Welding with Hot Wire of 316LN Thick Plate Applied on ITER Correction Coil Case
/ Fang, Chao (ASIPP, Anhui) ; Song, Yuntao (ASIPP, Anhui) ; Wu, Weiyue (ASIPP, Anhui) ; Wei, Jing (ASIPP, Anhui) ; Zhang, Shuquan (ASIPP, Anhui) ; Li, Hongwei (ITER China, Beijing) ; Dolgetta, N (ITER, St. Paul Lez Durance) ; Libeyre, P (ITER, St. Paul Lez Durance) ; Cormany, C (ITER, St. Paul Lez Durance) ; Sgobba, S (CERN)
ITER correction coil (CC) cases have characteristics of small cross section, large dimensions, and complex structure. The cases are made of heavy thick (20 mm), high strength and high toughness austenitic stainless steel 316LN. [...]
2014
- Published in : J. Fusion Energy 33 (2014) 752-758
|
|
|
6.
|
Progress of the ITER Correction Coils in China
/ Wei, J (Hefei, Inst. Plasma Phys.) ; Wu, W (Hefei, Inst. Plasma Phys.) ; Han, S (Hefei, Inst. Plasma Phys.) ; Yu, X (Hefei, Inst. Plasma Phys.) ; Du, S (Hefei, Inst. Plasma Phys.) ; Li, C (Hefei, Inst. Plasma Phys.) ; Fang, C (Hefei, Inst. Plasma Phys.) ; Wang, L (Hefei, Inst. Plasma Phys.) ; Zheng, W (Hefei, Inst. Plasma Phys.) ; Liu, L (Hefei, Inst. Plasma Phys.) et al.
The ITER Correction Coils (CC) include three sets of six coils each, distributed symmetrically around the tokamak to correct error fields. Each pair of coils, located on opposite sides of the tokamak, is series connected with polarity to produce asymmetric fields. [...]
2014 - 5.
- Published in : IEEE Trans. Appl. Supercond. 24 (2014) 4202005
In : 23rd International Conference on Magnet Technology, Boston, MA, USA, 14 - 19 Jul 2013, pp.4202005
|
|