US9015A - Manufacture of granular fuel from brush-wood and twigs - Google Patents

Description

UNITED STATES PATENT OFFICE.

REUBEN DANIELS, .OF VVOODSTOUK, VERMONT.

MANUFACTURE OF GRANULAR FUEL FROM BRUSH-WOOD AND TWIGS.

To all whom it may concern:

Be it known that I, REUBEN DANIELS, of \Voodstock, in the county of \Vindsor and State of Vermont, have invent-ed a new and useful manufacture or merchantable commodityto wit, Granular Fuel Prepared from Brush-VVood and Twigsof which the following is a specification.

It is a well-known fact that a large area of land as well in the vicinity of pupul us towns and cities as elsewhere is covered with a stunted growth of brush-wood,which is regal ed as an incumbrance and without merchantabic value, and a great number of acres of this land are annually cleared at aheavy expense by cutting down the brush and burning it to get it out of the way, so that the land may be cultivated. All attempts heretofore to convertbrush-wood and twigs into a convenient and cheap fuel have proved abortive, because of the great expense of handling, transporting, and storing, and the difliculty and inconvenience of using so large a bulk of matter with so little substance and heating-power as brush-wood in the condition in which it has heretofore been employed as fuel. All these diff culties in the way of handling, transporting, storing, and using brush-wood and twigs as fuel are obviated by my mode of preparing or manufacturing it into a marketable commodity, which consists in reducing it by machinery into short pieces whose average length is best when made equal to their average diameter, or thereabout, thus converting the bulky crooked sticks and twigs into a compact granular mass, which can be handled like nutcoal, corn in the ear, or thrashed grain by a shovel, scoop, or scuttle, and canbe transported to market in boxes, in barrels,in bags, or in bulk,as may bethe cheapest or 'most expedient. The brush reduced into this granular form can housed in grates or summer stoves, or as a substitute for char-. coal for kindling coal-fires, and .may be used for any purposefor which a brisk light fire is required. Among the advantages of this fuel may be mentioned its cleanliness and the facility with which it may be kindled by the flame of a match or taper. I have prepared the brush-woodand twigs by submitting it to the action of a machine provided with knives to cut it into pieces of the proper length; This machine Dhave propelled in various ways; but steam or animal power are the best. Machines for the purpose should be made as strong as is consistent with portability, so as to be capable of resisting the heavy strains to which they are frequently subjected. The costper cord of manufacturing this granular brush fuel exceeds but little, if any, the cost of cutting and splitting timber into the proper size for fire vent-ion, of the manufacture of granular fuel,

therefore, has greatly increased the value of brush-wood lands lying in populous districts where fuel is scarce, or in places having easy and cheap access to good markets for fuel. Since it takes only about one-tenth of the time to raise a crop of brush-wood that it takes to raise a crop of timber-trees, it follows that the brush crop for fuel is more immediately available than a crop of timber. Hazel-brush and other shrubbery, heretofore worthless and unused, can be converted into avaluable marketable product by being manufactured into granular fuel. In this way the quantity of available useful fuel is greatly augmented.

From the ranknes's and rapidity with which brush-wood and shrubbery grows the first three or four years, it often becomes 'in that time sufficiently matured to be manufactured with profit into granular fuel. This gives to my discovery a permanent prospective value as well as present importance, because by it the locust and other fast-growing wood can by a growth of even two or three years be made to furnish a supply of fuel suff cient for the wants of the inhabitants of the great western prairies, where the want of timber for fuel at the present time retards and almost forbids the settlement of lands in all other respects among the most desirable for the purposes of agrieulture. V

Machines constructed upon widely-different principles may be employed with advantage; but the construction of the machine or the manner of operating it are not material, so longas the brush and twigs are reduced by it etlicieutly and with due economy into a compact state in which they can he couvmiiently handled, transported. stored, and used.

Various machines now used lorcutt ing st raw may.whensulliciently strong, be used with-advantage for cutting l)lllSll-\\'t)l)tl into short pieces of a length equal, or thercabout. to the mean diameterot' thesticks-say one inch more or less. The machine represented in the annexed drawings is very well ailaptcd to this purpose. It the same for which Letters latcut were granted to me on the 2d day of July, in the year 1850, underthe title of [mpi'ovements in St raw-Gutters.

Figure 1 represents a top view, and Fig. 2 a longitudinal section, of the n1acliine,in which- A is a strong frame with a feeding-trough, D, on its top, at one end of which isa series of cutting-knives, b b b, secured to the ribs of a rotating cylinder or cutter-head, E, in such v manner that the edges ofthe knives in revolving shall generate a cylinder whose periphery nearly touches the edge of a stationary knife, (2, atfixed across the mouth ot'the feed-trough, and whose face stands-at a tangent to the cylinder described by the edges of the rotary knives.

Immediately behind the knifes a toothed feed ing-roller, B, is placed, which is hung in a swing-frame, G, which turns on the axis of the cutting-cylinder as a center. The roller B is geared by means of the wheels 1 i i to the cylinder-shaft, in order that it may be turned at a speed proportionate to that with which the cutter revolves, so that it may feed forward to the knives the brush placed in the trough an equal distance at each revolution, by which means the brush is cut up into pieces of uniform length. The toothed feedroller B is pulled down toward the bottom of the feedtrough by means of springs to a, which allow the main stems of the brush.

the roller to riseand fallto accommodate itself to the varying quantity or depth of brush passing under it, and as the brush is fed butt-end foremost the teeth ot'the roller engage with the crotches formed at t he junction of thebranches and draw them into the machine with great regularity and case, however crooked they may be.

Now, it is obvious that the ends ot the brush or twigs will be constantly pushed forward by the feed-roller beyond the edge-of the stationary knife, and that they will be as regularly chopped off every time a rotating knife passes the stationary one. If the feed be slow compared with the velocity with which the knives rotate, the brush will be cut into short lengths; but if the feed be comparatively fast the brush will be cut into longer lengths. Therefore to adjust the machine to chop up the brush finely or-coarsely simply requires the feed to be varied. A very good average length to out small brush is an inch; but it should be cut into a length about equal to its average diameter of Therefore the larger the brush the coarser it should be cut, and the smaller the brush the shorter the pieces into which it should be divided. The precise length must, however, be determined by the manufacturer to suit the circumstances of each case.

I claim- The granular fuel produced from brush-wood and twigs by cutting the same into lengths about equal to its ave 'age'diameter, as herein described, as a new manufacture.

In testimony whereof I have hereunto subscribed my name.

REUBEN DANIELS.

\Vitnesses:

I. H. \VATSON, E. S. RENwIeK.