KR20010000388A

KR20010000388A - Slipper

Info

Publication number: KR20010000388A
Application number: KR1020000056314A
Authority: KR
Inventors: 김성진
Original assignee: 김성진
Priority date: 2000-09-25
Filing date: 2000-09-25
Publication date: 2001-01-05

Abstract

PURPOSE: A slipper is provided, which is characterized in that user can put on the slipper through both front part and rear part easily. CONSTITUTION: The slipper has two part (2) for fixing toes in front and rear of the slipper. The toe fixing parts (2) is made of flexible material to maintain its shape.

Description

Slippers that can always be worn straight

가정에서 화장실이나 밖에 잠시 나갈 시에 급한 경우에 일일이 돌아서서 슬리퍼를 신고 다시 돌아서서 나가야 하는 불편함을 없애고 바로 즉시 신고 나갈 수 있어서 좋다. 슬리퍼 발앞측 발가락 걸림대에 기둥을 만든 것은 슬리퍼를 신을 경우에 웃면 중앙부가 처져서 내려오는 것을 방지하기 위한 것이고 특히 발뒤꿈치로 발걸림대를 신고 눌림을 받을지라도 벗을시에는 항시 곧 탄력성에 의하여 원상태로 복원되는 원료를 사용하여 제작되는 것이다.If you are in a hurry to go to the bathroom or outside for a while, turn around and wear slippers to get rid of the inconvenience of having to turn around again, so you can go out immediately. The pillars on the toe hangers on the side of the slippers are designed to prevent them from falling down when laughing while wearing slippers.In particular, they are always restored to their original state by their elasticity when they are taken off even if they are pressed by wearing the foot with a heel. It is produced using raw materials.

발 뒷면은 발 앞면보다 좁기 때문에 슬리퍼를 신을 경우 발뒤꿈치에 닿는 부문은 걸림대를 밟을시에 양쪽 (2)슬리퍼 걸림대 기둥에 껴서 발뒤꿈치가 슬리퍼 바닥에서 이탈되는 것을 방지하기 위한 것이다. 2, 3, 4, 는 같은 재질로 연결되었으며 모양과 두께가 다른 것뿐이다.The back of the foot is narrower than the front of the foot, so when you wear slippers, the area that touches the heel is to prevent the heel from slipping off the bottom of the slipper by slipping on both sides of the slipper hangers when you step on the hanger. 2, 3, 4, are made of the same material and differ only in shape and thickness.

..

슬리퍼 앞뒤에 동일하게 발앞측 발가락 걸림대를 부착시킨 슬리퍼Slippers with the same toe brace attached to the front and back of the slippers

(도면의 주요부분에 대한 부호의 설명)(Explanation of symbols for the main parts of the drawing)

1=슬리퍼 발바닥면1 = slipper sole

2=슬리퍼 발앞측 발가락 걸림대 하부기둥2 = slip foot toe hanger lower column

3=슬리퍼 발앞측 발가락 걸림대 중부기둥 연결대3 = Slipper toe hanger Mid column brace

4=슬리퍼 발앞측 발가락 걸림대 상부기둥 연결대4 = Slipper toe hanger upper column brace

5=슬리퍼 바닥 두께면5 = slipper bottom thickness

슬리퍼 금형을 만들어서 탄력성 및 기타재질로 바로 찍어내는 것이다.Slipper molds are made and imprinted with elasticity and other materials.

현재 일반사회 제작과정과 동일하다.It is the same as the general society production process.

슬리퍼를 신고 나가는데 돌아서서 신고 또 다시 돌아서서 나가야 하는 불편함이 없이 언제든지 직행할 수 있어 좋다고 사려된다.It is thought that it is good to go straight at any time without having to turn around wearing slippers and turning around again.

Claims

As described above, the front toe hanger is attached to the front and rear of the upper part of the slipper bottom, and (2) the toe hangers 2, 3, and 4 are installed on the front and back of the foot.