Nothing Special   »   [go: up one dir, main page]

Wu et al., 2020 - Google Patents

Influence of Tool Finishing on the Wear Development in Strip Drawing Tests with High Strength Steels

Wu et al., 2020

View PDF
Document ID
2117028677316904052
Author
Wu Y
Groche P
Publication year
Publication venue
Tribology Online

External Links

Snippet

With the increasing usage of high-strength steel, tool wear becomes a major challenge in sheet metal forming. As tribological properties are in consequence of the system characteristics, wear prediction is extremely difficult. The wear resistance characteristic …
Continue reading at www.jstage.jst.go.jp (PDF) (other versions)

Classifications

    • F—MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING ENGINES OR PUMPS
    • F16—ENGINEERING ELEMENTS AND UNITS; GENERAL MEASURES FOR PRODUCING AND MAINTAINING EFFECTIVE FUNCTIONING OF MACHINES OR INSTALLATIONS; THERMAL INSULATION IN GENERAL
    • F16C—SHAFTS; FLEXIBLE SHAFTS; ELEMENTS OR CRANKSHAFT MECHANISMS; ROTARY BODIES OTHER THAN GEARING ELEMENTS; BEARINGS
    • F16C33/00—Parts of bearings; Special methods for making bearings or parts thereof
    • F16C33/02—Parts of sliding-contact bearings
    • F16C33/04—Brasses; Bushes; linings
    • F16C33/06—Sliding surface mainly made of metal
    • F16C33/12—Structural composition; Use of special materials or surface treatments, e.g. for rust-proofing

Similar Documents

Publication Publication Date Title
Sagbas Post-processing effects on surface properties of direct metal laser sintered AlSi10Mg parts
Rodríguez et al. Surface improvement of shafts by the deep ball-burnishing technique
Grabon et al. Friction of threaded fasteners
Zhang et al. Burnishing of aerospace alloy: a theoretical–experimental approach
Jouini et al. The ability of precision hard turning to increase rolling contact fatigue life
Groche et al. Hydrodynamic effects of macroscopic deterministic surface structures in cold forging processes
Wu et al. Influence of Tool Finishing on the Wear Development in Strip Drawing Tests with High Strength Steels
Ramírez et al. A new approach for time-space wear modeling applied to machining tool wear
Schwingenschlögl et al. Characterization of tribological conditions within direct hot stamping
Davoudi et al. Investigation of effective geometrical parameters on wear of hot forging die
Capilla-González et al. Effect of the ball burnishing on the surface quality and mechanical properties of a TRIP steel sheet
Behrens et al. Increasing the efficiency of forging operations using adjusted tribological surfaces enhanced by hard coatings
Mahkamov Tribology in sheet metal forming
Courbon et al. Adhesion tendency of PVD TiAlN coatings at elevated temperatures during reciprocating sliding against carbon steel
Dogra et al. Surface integrity a key issue in hard turning–a review
Mahto et al. Roller burnishing-a literature review of developments and trends in approach to industrial application
Stickel et al. The influence of topography on the specific dissipated friction power in ultra-mild sliding wear: Experiment and simulation
Bräuer et al. Surface modifications for optimized forming operations
Bouktib et al. A new multi-scratching approach to identify the interaction between grit size and surface roughness on the residual stresses during belt-finishing
Matisková et al. Methodology for determining the cutting conditions in drilling of automated manufacturing
Dubar et al. Friction and wear phenomena in cold metal forming: an integrated approach
Kopas et al. Influence of re-profiling on the premature failure of hot forging dies
Baby et al. Comparative Study on the tribological performance and wear behaviour of hypereutectic Al–Si cylinder liner surfaces textured using micro-drilling and mechanical indentation-based approaches
Guglielmi et al. Tribological behaviour of microindented 100Cr6 steel surfaces in dry contact conditions
Meddah et al. Influence of dry friction on the wear behavior of X52 steel—experimental study and simulation using response surfaces method