Nothing Special   »   [go: up one dir, main page]

Coppola et al., 2009 - Google Patents

The effect of stress invariants on ductile fracture limit in steels

Coppola et al., 2009

Document ID
17289409407333659141
Author
Coppola T
Cortese L
Folgarait P
Publication year
Publication venue
Engineering Fracture Mechanics

External Links

Snippet

It is widely accepted that damage due to plastic deformation and ductile fracture in metals greatly depends on the triaxiality level (T) of the stress tensor, but according to recent developments described in the literature, it has been observed that the fracture limit εf may …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/0202—Control of the test
    • G01N2203/0212—Theories, calculations

Similar Documents

Publication Publication Date Title
Coppola et al. The effect of stress invariants on ductile fracture limit in steels
Do Kweon et al. Determination of true stress-strain curve of type 304 and 316 stainless steels using a typical tensile test and finite element analysis
Pei et al. A structural strain parameter for a unified treatment of fatigue behaviors of welded components
Zhao et al. Identification of post-necking stress–strain curve for sheet metals by inverse method
Beese et al. Partially coupled anisotropic fracture model for aluminum sheets
Seidt et al. Plastic deformation of 2024-T351 aluminum plate over a wide range of loading conditions
Kofiani et al. New calibration method for high and low triaxiality and validation on SENT specimens of API X70
Xue et al. Experimental assessment of nonlinear elastic behaviour of dual-phase steels and application to springback prediction
Brnic et al. Analysis of experimental data on the behavior of steel S275JR–Reliability of modern design
Lee et al. Change of the yield stress in roll formed ERW pipes considering the Bauschinger effect
Zhang et al. Comparative experimental study of hot-formed, hot-finished and cold-formed rectangular hollow sections
da Rocha et al. Analysis of plastic flow localization under strain paths changes and its coupling with finite element simulation in sheet metal forming
Muller et al. Predicting plastic deformation and work hardening during V-band formation
Li et al. Elastic-plastic stress-strain calculation at notch root under monotonic, uniaxial and multiaxial loadings
Iob et al. Modelling of anisotropic hardening behavior for the fracture prediction in high strength steel line pipes
Shlyannikov et al. Elastic and plastic parts of strain energy density in critical distance determination
Souto et al. Fatigue behaviour of thin-walled cold roll-formed steel sections
Fan et al. Numerical investigation on fire resistance of stainless steel columns with square hollow section under axial compression
Verstraete et al. Constraint analysis of defects in strength mismatched girth welds of (pressurized) pipe and Curved Wide Plate tensile test specimens
Bleck et al. Numerical and experimental analyses of damage behaviour of steel moment connection
Shu et al. Experimental study of cold-drawn duplex stainless steel circular tubes under axial compression
Santos et al. Distortional strength of end-bolted CFS lipped channel columns: Experimental investigation, numerical simulations and DSM design
Yu et al. The effect of constraint on fracture properties of Z3CN20. 09M after accelerated thermal aging
Sakonder et al. Directional dependence of critical axial strain in X65 pipeline steel subject to combined internal pressure and bending loading
Carrillo et al. Experimental study on the mechanical properties of welded-wire meshes for concrete reinforcement in Mexico City