Nothing Special   »   [go: up one dir, main page]

Chub et al., 2015 - Google Patents

Study on power losses of the full soft-switching current-fed DC/DC converter with Si and GaN devices

Chub et al., 2015

Document ID
16459832795025045106
Author
Chub A
Rabkowski J
Blinov A
Vinnikov D
Publication year
Publication venue
IECON 2015-41st Annual Conference of the IEEE Industrial Electronics Society

External Links

Snippet

This paper discusses power losses in a current-fed DC/DC converter aimed for photovoltaic applications. Scenarios of the low voltage switch realization analyzed include a transistor with a series diode and two transistors in series. Both the high and the low voltage stage are …
Continue reading at ieeexplore.ieee.org (other versions)

Classifications

    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M3/00—Conversion of dc power input into dc power output
    • H02M3/02—Conversion of dc power input into dc power output without intermediate conversion into ac
    • H02M3/04—Conversion of dc power input into dc power output without intermediate conversion into ac by static converters
    • H02M3/10—Conversion of dc power input into dc power output without intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode
    • H02M3/145—Conversion of dc power input into dc power output without intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode using devices of a triode or transistor type requiring continuous application of a control signal
    • H02M3/155—Conversion of dc power input into dc power output without intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode using devices of a triode or transistor type requiring continuous application of a control signal using semiconductor devices only
    • H02M3/156—Conversion of dc power input into dc power output without intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode using devices of a triode or transistor type requiring continuous application of a control signal using semiconductor devices only with automatic control of output voltage or current, e.g. switching regulators
    • H02M3/158—Conversion of dc power input into dc power output without intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode using devices of a triode or transistor type requiring continuous application of a control signal using semiconductor devices only with automatic control of output voltage or current, e.g. switching regulators including plural semiconductor devices as final control devices for a single load
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02B—INDEXING SCHEME RELATING TO CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO BUILDINGS, e.g. INCLUDING HOUSING AND APPLIANCES OR RELATED END-USER APPLICATIONS
    • Y02B70/00—Technologies for an efficient end-user side electric power management and consumption
    • Y02B70/10—Technologies improving the efficiency by using switched-mode power supplies [SMPS], i.e. efficient power electronics conversion
    • Y02B70/14—Reduction of losses in power supplies
    • Y02B70/1491—Other technologies for reduction of losses, e.g. non-dissipative snubbers, diode reverse recovery losses minimisation, zero voltage switching [ZVS], zero current switching [ZCS] or soft switching converters
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M3/00—Conversion of dc power input into dc power output
    • H02M3/22—Conversion of dc power input into dc power output with intermediate conversion into ac
    • H02M3/24—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters
    • H02M3/28—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac
    • H02M3/325—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac using devices of a triode or a transistor type requiring continuous application of a control signal
    • H02M3/335—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac using devices of a triode or a transistor type requiring continuous application of a control signal using semiconductor devices only
    • H02M3/33569—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac using devices of a triode or a transistor type requiring continuous application of a control signal using semiconductor devices only having several active switching elements
    • H02M3/33576—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac using devices of a triode or a transistor type requiring continuous application of a control signal using semiconductor devices only having several active switching elements having at least one active switching element at the secondary side of an isolation transformer
    • H02M3/33592—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac using devices of a triode or a transistor type requiring continuous application of a control signal using semiconductor devices only having several active switching elements having at least one active switching element at the secondary side of an isolation transformer having a synchronous rectifier circuit or a synchronous freewheeling circuit at the secondary side of an isolation transformer
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02B—INDEXING SCHEME RELATING TO CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO BUILDINGS, e.g. INCLUDING HOUSING AND APPLIANCES OR RELATED END-USER APPLICATIONS
    • Y02B70/00—Technologies for an efficient end-user side electric power management and consumption
    • Y02B70/10—Technologies improving the efficiency by using switched-mode power supplies [SMPS], i.e. efficient power electronics conversion
    • Y02B70/14—Reduction of losses in power supplies
    • Y02B70/1458—Synchronous rectification
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02B—INDEXING SCHEME RELATING TO CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO BUILDINGS, e.g. INCLUDING HOUSING AND APPLIANCES OR RELATED END-USER APPLICATIONS
    • Y02B70/00—Technologies for an efficient end-user side electric power management and consumption
    • Y02B70/10—Technologies improving the efficiency by using switched-mode power supplies [SMPS], i.e. efficient power electronics conversion
    • Y02B70/14—Reduction of losses in power supplies
    • Y02B70/1416—Converters benefiting from a resonance, e.g. resonant or quasi-resonant converters
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M7/00—Conversion of ac power input into dc power output; Conversion of dc power input into ac power output
    • H02M7/02—Conversion of ac power input into dc power output without possibility of reversal
    • H02M7/04—Conversion of ac power input into dc power output without possibility of reversal by static converters
    • H02M7/12—Conversion of ac power input into dc power output without possibility of reversal by static converters using discharge tubes with control electrode or semiconductor devices with control electrode
    • H02M7/21—Conversion of ac power input into dc power output without possibility of reversal by static converters using discharge tubes with control electrode or semiconductor devices with control electrode using devices of a triode or transistor type requiring continuous application of a control signal
    • H02M7/217—Conversion of ac power input into dc power output without possibility of reversal by static converters using discharge tubes with control electrode or semiconductor devices with control electrode using devices of a triode or transistor type requiring continuous application of a control signal using semiconductor devices only
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02B—INDEXING SCHEME RELATING TO CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO BUILDINGS, e.g. INCLUDING HOUSING AND APPLIANCES OR RELATED END-USER APPLICATIONS
    • Y02B70/00—Technologies for an efficient end-user side electric power management and consumption
    • Y02B70/10—Technologies improving the efficiency by using switched-mode power supplies [SMPS], i.e. efficient power electronics conversion
    • Y02B70/12—Power factor correction technologies for power supplies
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M1/00—Details of apparatus for conversion
    • H02M1/08—Circuits specially adapted for the generation of control voltages for semiconductor devices incorporated in static converters
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M1/00—Details of apparatus for conversion
    • H02M1/32—Means for protecting converters other than automatic disconnection
    • H02M1/34—Snubber circuits
    • H02M2001/346—Passive non-dissipative snubbers
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M1/00—Details of apparatus for conversion
    • H02M2001/0067—Converter structures employing plural converter units, other than for parallel operation of the units on a single load
    • H02M2001/007—Plural converter units in cascade

Similar Documents

Publication Publication Date Title
Choi et al. Novel zero-current-switching (ZCS) PWM switch cell minimizing additional conduction loss
Lu et al. An indirect matrix converter based 97%-efficiency on-board level 2 battery charger using E-mode GaN HEMTs
Rezvanyvardom et al. New interleaved zero-current switching pulse-width modulation boost converter with one auxiliary switch
Rodriguez et al. Optimizing the efficiency of a dc-dc boost converter over 98% by using commercial SiC transistors with switching frequencies from 100 kHz to 1MHz
Khalili et al. Fully soft-switched non-isolated high step-down DC–DC converter with reduced voltage stress and expanding capability
Chub et al. Study on power losses of the full soft-switching current-fed DC/DC converter with Si and GaN devices
Nielsen et al. Efficiency and cost comparison of Si IGBT and SiC JFET isolated DC/DC converters
Liivik et al. Experimental study of high step-up quasi-Z-source DC-DC converter with synchronous rectification
Vinnikov et al. Four novel PWM shoot-through control methods for impedance source DC-DC converters
George et al. Topology survey for GaN-based high voltage step-down single-input multi-output DC-DC converter systems
Gu et al. A family of zero-voltage-switched resonant converters: Derivation, operation, and design
Ansari et al. COMPARATIVE EVALUATION OF Si MOSFET-BASED SOFT-SWITCHED DC-DC CONVERTERS AND GaN HEMT-BASED HARD-SWITCHED DC-DC CONVERTERS
Abbasi et al. A new three-phase soft-switched bridgeless AC/DC step-up converter with current fed voltage doubler modules for DC grid in wind systems
Moradisizkoohi et al. A quasi-resonant bi-directional buck-boost converter for Electric Vehicle applications
Chub et al. Zero-voltage switching galvanically isolated current-fed full-bridge DC-DC converter
Hsieh et al. An interleaved bidirectional DC-DC converter with zero-voltage-switching
Shimada et al. A novel bridgeless PFC boost rectifier with a simple ZVS circuit
Li et al. SiC power devices and applications in quasi-z-source converters/inverters
Mishima et al. A ZCS-PWM bidirectional DC-DC converter with a two-terminal resonant tank-based auxiliary switching cell
Kim et al. Passive lossless snubbers using the coupled inductor method for the soft switching capability of boost PFC rectifiers
Blinov et al. Evaluation of low-and high-voltage GaN transistors in soft-switching DC-DC converter
Zheng et al. A high step-up DC-DC converter with switched-capacitor and ZVS realization
Wang et al. Zero-current-transition PWM DC–DC converters using new zero-current-switching PWM switch cell
Lee et al. Multiphase high gain boost converter with switched-capacitor and coupled-inductor
Wang et al. Zero-current transition interleaved boost dc/dc converter