Nothing Special   »   [go: up one dir, main page]

Kan et al., 2018 - Google Patents

Numerical study on the internal flow characteristics of an axial-flow pump under stall conditions

Kan et al., 2018

Document ID
14769883423247299663
Author
Kan K
Zheng Y
Chen Y
Xie Z
Yang G
Yang C
Publication year
Publication venue
Journal of Mechanical Science and Technology

External Links

Snippet

When an axial-flow pump works in low flow rate conditions, rotating stall phenomena will probably occur, and the pump will enter hydraulic unsteady conditions. The rotating stall can lead to violent vibration, noise, turbulent flow, and a sharp drop in efficiency. This affects the …
Continue reading at link.springer.com (other versions)

Classifications

    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E10/00—Energy generation through renewable energy sources
    • Y02E10/20—Hydro energy
    • Y02E10/22—Conventional, e.g. with dams, turbines and waterwheels
    • Y02E10/223—Turbines or waterwheels, e.g. details of the rotor
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E10/00—Energy generation through renewable energy sources
    • Y02E10/20—Hydro energy
    • Y02E10/22—Conventional, e.g. with dams, turbines and waterwheels
    • Y02E10/226—Other parts or details
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E10/00—Energy generation through renewable energy sources
    • Y02E10/20—Hydro energy
    • Y02E10/28—Tidal stream or damless hydropower, e.g. sea flood and ebb, river, stream
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E10/00—Energy generation through renewable energy sources
    • Y02E10/70—Wind energy

Similar Documents

Publication Publication Date Title
Kan et al. Numerical study on the internal flow characteristics of an axial-flow pump under stall conditions
Kan et al. Numerical simulation of transient flow in a shaft extension tubular pump unit during runaway process caused by power failure
Wang et al. Effects of flow rate and rotational speed on pressure fluctuations in a double-suction centrifugal pump
Cavazzini et al. Analysis of the unstable behavior of a pump-turbine in turbine mode: Fluid-dynamical and spectral characterization of the S-shape characteristic
Qian et al. Numerical simulation and analysis of pressure pulsation in Francis hydraulic turbine with air admission
Tao et al. Comparative numerical studies for the flow energy dissipation features in a pump-turbine in pump mode and turbine mode
Feng et al. Numerical investigation on characteristics of transient process in centrifugal pumps during power failure
Li et al. Evolution mechanism of a prototype pump turbine after pump power-off
Xiao et al. Numerical predictions of pressure pulses in a Francis pump turbine with misaligned guide vanes
Tao et al. Numerical investigation of the flow regime and cavitation in the vanes of reversible pump-turbine during pump mode's starting up
Trivedi et al. Experimental investigation of a high head Francis turbine during spin-no-load operation
Lu et al. Influence of guide vane profile on the flow energy dissipation in a reversible pump-turbine at pump mode
Ye et al. Instability analysis under part-load conditions in centrifugal pump
Li et al. Cavitation effects on pressure fluctuation in pump-turbine hump region
Khullar et al. Influence of runner cone profile and axial water jet injection in a low head Francis turbine at part load
Liu et al. Vortex motion in vaneless space and runner passage of pump-turbine in S-shaped region
Rodríguez et al. Viability of unidirectional radial turbines for twin-turbine configuration of OWC wave energy converters
Binama et al. Investigation on reversible pump turbine flow structures and associated pressure field characteristics under different guide vane openings
Laouari et al. Predicting unsteady behavior of a small francis turbine at several operating points
Cheng et al. Investigation of the distortion suction flow on the performance of the canned nuclear coolant pump
Zhang et al. Experimental and numerical study of reverse power generation in coastal axial flow pump system using coastal water
Zheng et al. Strong transient characteristics in axial flow waterjet pump during rapid starting period with special emphasis on saddle zone
Liu et al. Onset of flow separation phenomenon in a low-specific speed centrifugal pump impeller
Liu et al. Dynamic stall inception and evolution process measured by high-frequency particle image velocimetry system in low specific speed impeller
Li et al. Stability optimization and analysis of a bidirectional shaft extension pump