Nothing Special   »   [go: up one dir, main page]

Du et al., 2020 - Google Patents

Visualizing two-dimensional internal temperature distribution in cylindrical Li-ion cells

Du et al., 2020

Document ID
13012505103466627339
Author
Du X
Wu Q
Wang Y
Pan T
Wei Y
Chen H
Song W
Fang D
Publication year
Publication venue
Journal of Power Sources

External Links

Snippet

Temperature is one of the most important parameters in the safety issues of Li-ion batteries. Generally, the temperature distribution inside the cell is not uniform, and the observation and mechanism of the heat generation inside the batteries has not been fully understood. For …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E60/00—Enabling technologies or technologies with a potential or indirect contribution to GHG emissions mitigation
    • Y02E60/10—Energy storage
    • Y02E60/12—Battery technology
    • Y02E60/122—Lithium-ion batteries
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M10/00—Secondary cells; Manufacture thereof
    • H01M10/05—Accumulators with non-aqueous electrolyte
    • H01M10/052—Li-accumulators
    • H01M10/0525—Rocking-chair batteries, i.e. batteries with lithium insertion or intercalation in both electrodes; Lithium-ion batteries
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M10/00—Secondary cells; Manufacture thereof
    • H01M10/42—Methods or arrangements for servicing or maintenance of secondary cells or secondary half-cells
    • H01M10/44—Methods for charging or discharging
    • H01M10/446—Initial charging measures

Similar Documents

Publication Publication Date Title
Du et al. Visualizing two-dimensional internal temperature distribution in cylindrical Li-ion cells
Zhu et al. A novel embedded method for in-situ measuring internal multi-point temperatures of lithium ion batteries
Wang et al. A comparative analysis on thermal runaway behavior of Li (NixCoyMnz) O2 battery with different nickel contents at cell and module level
Panchal et al. Transient electrochemical heat transfer modeling and experimental validation of a large sized LiFePO4/graphite battery
Panchal et al. Electrochemical thermal modeling and experimental measurements of 18650 cylindrical lithium-ion battery during discharge cycle for an EV
Wu et al. Impact of low temperature and charge profile on the aging of lithium-ion battery: Non-invasive and post-mortem analysis
Velumani et al. Thermal behavior of lithium-and sodium-ion batteries: a review on heat generation, battery degradation, thermal runway–perspective and future directions
Ma et al. Degradation mechanism study and safety hazard analysis of overdischarge on commercialized lithium-ion batteries
Abdul‐Quadir et al. Heat generation in high power prismatic Li‐ion battery cell with LiMnNiCoO2 cathode material
Zhou et al. Investigating the relationship between heating temperature and thermal runaway of prismatic lithium-ion battery with LiFePO4 as cathode
Yin et al. Analyzing and mitigating battery ageing by self-heating through a coupled thermal-electrochemical model of cylindrical Li-ion cells
Guo et al. Intelligent monitoring for safety‐enhanced lithium‐ion/sodium‐ion batteries
Chen et al. Thermal runaway modeling of LiNi0. 6Mn0. 2Co0. 2O2/graphite batteries under different states of charge
Wang et al. Decoupling parameter estimation strategy based electrochemical-thermal coupled modeling method for large format lithium-ion batteries with internal temperature experimental validation
Wang et al. Safety performance and failure prediction model of cylindrical lithium-ion battery
Panchal et al. Measurement of temperature gradient (dT/dy) and temperature response (dT/dt) of a prismatic lithium-ion pouch cell with LiFePO 4 cathode material
Gulsoy et al. In-situ temperature monitoring of a lithium-ion battery using an embedded thermocouple for smart battery applications
Wu et al. Thermal safety boundary of lithium-ion battery at different state of charge
JP4347541B2 (en) Method and apparatus for characterization of high energy electrochemical cells using output functions obtained by calorimetry
Hao et al. Study on mechanical properties and failure mechanism of 18650 Lithium-ion battery using digital image correlation and acoustic emission
Zou et al. Venting composition and rate of large-format LiNi0. 8Co0. 1Mn0. 1O2 pouch power battery during thermal runaway
Calearo et al. A methodology to model and validate electro-thermal-aging dynamics of electric vehicle battery packs
Sun et al. Lithium-ion battery degradation caused by overcharging at low temperatures
Li et al. Temperature characterization based state-of-charge estimation for pouch lithium-ion battery
Dong et al. Analysis of lithium-ion battery thermal models inaccuracy caused by physical properties uncertainty