Nothing Special   »   [go: up one dir, main page]

Zhu et al., 2019 - Google Patents

Impact of hub gap leakage on stator endwall flow in an axial compressor stage with casing treatment

Zhu et al., 2019

Document ID
897032317354246026
Author
Zhu M
Teng J
Qiang X
Feng J
Feng J
Publication year
Publication venue
Aerospace Science and Technology

External Links

Snippet

In an axial compressor stage equipped with slot-type casing treatment, simulation without hub gap between rotors and stators achieves much lower stall margin enhancement than experiment, which results from the over-predicted corner stall in stators. Aiming at clarifying …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • F—MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING ENGINES OR PUMPS
    • F01—MACHINES OR ENGINES IN GENERAL; ENGINE PLANTS IN GENERAL; STEAM ENGINES
    • F01D—NON-POSITIVE DISPLACEMENT MACHINES OR ENGINES, e.g. STEAM TURBINES
    • F01D5/00—Blades; Blade-carrying members; Heating, heat-insulating, cooling or anti-vibration means on the blades or the members
    • F01D5/12—Blades
    • F01D5/14—Form or construction
    • F01D5/141—Shape, i.e. outer, aerodynamic form
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02T—CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO TRANSPORTATION
    • Y02T50/00—Aeronautics or air transport
    • Y02T50/60—Efficient propulsion technologies
    • Y02T50/67—Relevant aircraft propulsion technologies
    • G—PHYSICS
    • G06—COMPUTING; CALCULATING; COUNTING
    • G06F—ELECTRICAL DIGITAL DATA PROCESSING
    • G06F17/00—Digital computing or data processing equipment or methods, specially adapted for specific functions
    • G06F17/50—Computer-aided design
    • G06F17/5009—Computer-aided design using simulation

Similar Documents

Publication Publication Date Title
Denton et al. A numerical investigation into the sources of endwall loss in axial flow turbines
Riéra et al. Zonal detached-eddy simulation applied to the tip-clearance flow in an axial compressor
Li et al. An aerothermal analysis of the effects of tip gap height and cavity depth of a gas turbine blade
Vuong et al. Recirculation-groove coupled casing treatment for a transonic axial compressor
da Silva et al. Numerical investigation of a HPT with different rotor tip configurations in terms of pressure ratio and efficiency
Zhu et al. Impact of hub gap leakage on stator endwall flow in an axial compressor stage with casing treatment
Ju et al. Flow characteristics on a 4-stage low-speed research compressor with a cantilevered stator
Lu et al. Design strategy of axial slot casing treatment for a transonic compressor rotor based on parametric analysis
Han et al. Influence of tip leakage flow and ejection on stall mechanism in a transonic tandem rotor
Zamiri et al. Effect of blade squealer tips on aerodynamic performance and stall margin in a transonic centrifugal compressor with vaned diffuser
An et al. Investigation of the unsteady flow in a transonic axial compressor adopted in the compressed air energy storage system
Chen et al. Experimental and numerical investigation of high load turbine blade tip cavity structures
Choi et al. Design optimization of circumferential casing grooves for a transonic axial compressor to enhance stall margin
Luo et al. Multi-point design optimization of a transonic compressor blade by using an adjoint method
Liu et al. Investigation of unsteady impeller-diffuser interaction in a transonic centrifugal compressor stage
Kong et al. Influence of cavity leakage flow on corner separation in a shrouded stator cascade
da Silva et al. A study of the heat transfer in Winglet and Squealer rotor tip configurations for a non-cooled HPT blade based on CFD calculations
Casartelli et al. Numerical flow analysis in a subsonic vaned radial diffuser with leading edge redesign
Glanville Investigation into core compressor tip leakage modelling techniques using a 3D viscous solver
Zhang et al. Numerical investigation and modeling of sweep effects on inlet flow field of axial compressor cascades
An et al. Experimental study of the critical incidence phenomena in low speed compressor stators with both conventional and 3D blading designs
Amin et al. Numerical analysis of a novel casing treatment in an axial flow fan
Yao et al. The effects of swirling purge leakage on aerothermal performance of flat and non-axisymmetric endwalls
Pullan et al. Improving the performance of a turbine with low aspect ratio stators by aft-loading
Ye et al. Modeling for tip clearance effects on stall-onset condition in transonic axial compressors