Nothing Special   »   [go: up one dir, main page]

Li et al., 2016 - Google Patents

Dynamic recrystallization in biomedical Co-29Cr-6Mo-0.16 N alloy with low stacking fault energy

Li et al., 2016

Document ID
8847346357973938112
Author
Li Y
Koizumi Y
Chiba A
Publication year
Publication venue
Materials Science and Engineering: A

External Links

Snippet

Dynamic recrystallization (DRX) behaviors of biomedical Co-29Cr-6Mo-0.16 N (CCMN) alloy were analyzed in detail in hot compressive tests. At low temperature (≤ 1050° C) and low strain rate (≤ 1 s− 1), DRXed grains preferentially nucleate along pre-existing grain …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • C—CHEMISTRY; METALLURGY
    • C22—METALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS
    • C22F—CHANGING THE PHYSICAL STRUCTURE OF NON-FERROUS METALS AND NON-FERROUS ALLOYS
    • C22F1/00—Changing the physical structure of non-ferrous metals or alloys by heat treatment or by hot or cold working
    • C22F1/10—Changing the physical structure of non-ferrous metals or alloys by heat treatment or by hot or cold working of nickel or cobalt or alloys based thereon
    • C—CHEMISTRY; METALLURGY
    • C22—METALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS
    • C22C—ALLOYS
    • C22C38/00—Ferrous alloys, e.g. steel alloys
    • C22C38/18—Ferrous alloys, e.g. steel alloys containing chromium
    • C22C38/40—Ferrous alloys, e.g. steel alloys containing chromium with nickel
    • C—CHEMISTRY; METALLURGY
    • C22—METALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS
    • C22F—CHANGING THE PHYSICAL STRUCTURE OF NON-FERROUS METALS AND NON-FERROUS ALLOYS
    • C22F1/00—Changing the physical structure of non-ferrous metals or alloys by heat treatment or by hot or cold working
    • C22F1/16—Changing the physical structure of non-ferrous metals or alloys by heat treatment or by hot or cold working of other metals or alloys based thereon
    • C22F1/18—Changing the physical structure of non-ferrous metals or alloys by heat treatment or by hot or cold working of other metals or alloys based thereon high-melting or refractory metals or alloys based thereon
    • C22F1/183—Changing the physical structure of non-ferrous metals or alloys by heat treatment or by hot or cold working of other metals or alloys based thereon high-melting or refractory metals or alloys based thereon of titanium or alloys based thereon
    • C—CHEMISTRY; METALLURGY
    • C21—METALLURGY OF IRON
    • C21D—MODIFYING THE PHYSICAL STRUCTURE OF FERROUS METALS; GENERAL DEVICES FOR HEAT TREATMENT OF FERROUS OR NON-FERROUS METALS OR ALLOYS; MAKING METAL MALLEABLE BY DECARBURISATION, TEMPERING OR OTHER TREATMENTS
    • C21D1/00—General methods or devices for heat treatments, e.g. annealing, hardening, quenching, tempering
    • C21D1/18—Hardening; Quenching with or without subsequent tempering

Similar Documents

Publication Publication Date Title
Li et al. Dynamic recrystallization in biomedical Co-29Cr-6Mo-0.16 N alloy with low stacking fault energy
Moravcik et al. Interstitial doping enhances the strength-ductility synergy in a CoCrNi medium entropy alloy
Valiev et al. A nanostructural design to produce high-strength Al alloys with enhanced electrical conductivity
Bahl et al. Elucidating microstructural evolution and strengthening mechanisms in nanocrystalline surface induced by surface mechanical attrition treatment of stainless steel
Bu et al. Contribution of interphase precipitation on yield strength in thermomechanically simulated Ti–Nb and Ti–Nb–Mo microalloyed steels
LeBrun et al. Effect of retained austenite on subsequent thermal processing and resultant mechanical properties of selective laser melted 17–4 PH stainless steel
Liu et al. Control of inter/intra-granular κ-carbides and its influence on overall mechanical properties of a Fe-11Mn-10Al-1.25 C low density steel
Morozova et al. Grain refinement and strengthening of a Cu–0.1 Cr–0.06 Zr alloy subjected to equal channel angular pressing
Wang et al. Flow behavior and microstructures of superalloy 718 during high temperature deformation
Sun et al. Microstructural evolution and recrystallization behavior of cold rolled austenitic stainless steel with dual phase microstructure during isothermal annealing
Mani et al. Deformation induced FCC to HCP transformation in a Co–27Cr–5Mo–0.05 C alloy
Sun et al. Deformation enhanced transformation and dynamic recrystallization of ferrite in a low carbon steel during multipass hot deformation
Fan et al. Strengthening behavior of Al–Cu–Mg alloy sheet in hot forming–quenching integrated process with cold–hot dies
Dehghan-Manshadi et al. Strain-induced phase transformation during thermo-mechanical processing of titanium alloys
Yang et al. Effects of microstructure, texture evolution and strengthening mechanisms on mechanical properties of 3003 aluminum alloy during cryogenic rolling
Eskandari et al. An investigation into the room temperature mechanical properties of nanocrystalline austenitic stainless steels
Karami et al. Shear punch superplasticity in equal-channel angularly pressed Mg–12Li–1Zn alloy
Liu et al. Dynamic recrystallization and precipitation behaviors during hot deformation of a κ-carbide-bearing multiphase Fe–11Mn–10Al–0.9 C lightweight steel
Liu et al. Study on the dynamic recrystallization mechanisms of GH5188 superalloy during hot compression deformation
Young et al. Thermal microstructural stability of AZ31 magnesium after severe plastic deformation
Padap et al. Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties
Gupta et al. High leaded tin bronze processing during multi-directional forging: Effect on microstructure and mechanical properties
Zhang et al. Microstructures and tensile properties of AZ31 magnesium alloy by continuous extrusion forming process
Kalahroudi et al. On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion
Kim et al. Influence of inter/intra-granular κ-carbides on the deformation mechanism in lightweight Fe-20Mn-11.5 Al-1.2 C steel