Nothing Special   »   [go: up one dir, main page]

Mohammadi et al., 2010 - Google Patents

Low temperature nanostructured lithium titanates: controlling the phase composition, crystal structure and surface area

Mohammadi et al., 2010

Document ID
8729803110283049889
Author
Mohammadi M
Fray D
Publication year
Publication venue
Journal of sol-gel science and technology

External Links

Snippet

Low temperature lithium titanate compounds (ie, Li 4 Ti 5 O 12 and Li 2 TiO 3) with nanocrystalline and mesoporous structure were prepared by a straightforward aqueous particulate sol–gel route. The effect of Li: Ti molar ratio was studied on crystallisation …
Continue reading at link.springer.com (other versions)

Classifications

    • C—CHEMISTRY; METALLURGY
    • C01—INORGANIC CHEMISTRY
    • C01P—INDEXING SCHEME RELATING TO STRUCTURAL AND PHYSICAL ASPECTS OF SOLID INORGANIC COMPOUNDS
    • C01P2002/00—Crystal-structural characteristics
    • C01P2002/70—Crystal-structural characteristics defined by measured X-ray, neutron or electron diffraction data
    • C01P2002/72—Crystal-structural characteristics defined by measured X-ray, neutron or electron diffraction data by d-values or two theta-values, e.g. as X-ray diagram
    • C—CHEMISTRY; METALLURGY
    • C01—INORGANIC CHEMISTRY
    • C01P—INDEXING SCHEME RELATING TO STRUCTURAL AND PHYSICAL ASPECTS OF SOLID INORGANIC COMPOUNDS
    • C01P2006/00—Physical properties of inorganic compounds
    • C01P2006/12—Surface area
    • C—CHEMISTRY; METALLURGY
    • C01—INORGANIC CHEMISTRY
    • C01P—INDEXING SCHEME RELATING TO STRUCTURAL AND PHYSICAL ASPECTS OF SOLID INORGANIC COMPOUNDS
    • C01P2004/00—Particle morphology
    • C01P2004/60—Particles characterised by their size
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01M—PROCESSES OR MEANS, e.g. BATTERIES, FOR THE DIRECT CONVERSION OF CHEMICAL INTO ELECTRICAL ENERGY
    • H01M4/00—Electrodes
    • H01M4/02—Electrodes composed of or comprising active material
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02E—REDUCTION OF GREENHOUSE GASES [GHG] EMISSION, RELATED TO ENERGY GENERATION, TRANSMISSION OR DISTRIBUTION
    • Y02E60/00—Enabling technologies or technologies with a potential or indirect contribution to GHG emissions mitigation
    • Y02E60/10—Energy storage

Similar Documents

Publication Publication Date Title
Ding et al. TiO 2 hollow spheres with large amount of exposed (001) facets for fast reversible lithium storage
Wang et al. Ultrathin Na 1.08 V 3 O 8 nanosheets—a novel cathode material with superior rate capability and cycling stability for Li-ion batteries
WO2016138385A1 (en) Two-dimensional nanosheets and methods of making and use thereof
Mohammadi et al. Low temperature nanostructured lithium titanates: controlling the phase composition, crystal structure and surface area
KR19990077305A (en) Oxides and hydroxides of nanostructures and their synthesis
Sutradhar et al. Organic free low temperature direct synthesis of hierarchical protonated layered titanates/anatase TiO 2 hollow spheres and their task-specific applications
KR102316442B1 (en) Ceramic powder material, manufacturing method and battery of ceramic powder material
Niu et al. Enhanced electrochemical lithium-ion charge storage of iron oxide nanosheets
Gunnewiek et al. Synthesis of spinel cobalt oxide nanoparticles using a modified polymeric precursor method
Duraia et al. Humic acid-derived graphene–SnO2 nanocomposites for high capacity lithium-ion battery anodes
Ickler et al. Ethylene glycol/citric acid stabilized wet chemically synthesized Y2CoNiO6, and its structural, dielectric, magnetic and electrochemical behavior
Pineda-Aguilar et al. Preparation of TiO 2–(B) by microemulsion mediated hydrothermal method: Effect of the precursor and its electrochemical performance
Mohammadi et al. Synthesis of highly pure nanocrystalline and mesoporous CaTiO 3 by a particulate sol–gel route at the low temperature
Gao et al. Influencing factor investigation on dynamic hydrothermal growth of gapped hollow BaTiO 3 nanospheres
KR20210154138A (en) Manufacturing method of titanium dioxide structure
Abu El-Fadl et al. The impact of different surfactants on the structure, surface area, and electrochemical properties of hydrothermally synthesized spinel NiCo2O4 nanoparticles
Carazeanu Popovici et al. Sol–gel preparation and characterization of perovskite lanthanum lithium titanate
Siwińska-Stefańska et al. A composite TiO2-SiO2-ZrO2 oxide system as a high-performance anode material for lithium-ion batteries
Liu et al. The characterization of lithium titanate microspheres synthesized by a hydrothermal method
Lee et al. Facile synthesis of MnCO 3 nanoparticles by supercritical CO 2 and their conversion to manganese oxide for supercapacitor electrode materials
Penki et al. Polymer template-assisted microemulsion synthesis of large surface area, porous Li 2 MnO 3 and its characterization as a positive electrode material of Li-ion cells
Yo et al. C-rate and temperature dependence of electrochemical performance of Li [Co 0.1 Ni 0.15 Li 0.2 Mn 0.55] O 2 cathode materials before and after Co 3 (PO 4) 2 coating
Escamilla-Pérez et al. Lithium insertion properties of mesoporous nanocrystalline TiO 2 and TiO 2–V 2 O 5 microspheres prepared by non-hydrolytic sol–gel
Wang et al. Controlled synthesis of porous nickel oxide nanostructures and their electrochemical capacitive behaviors
JP6916406B1 (en) Ceramic powder material, manufacturing method of ceramic powder material, molded body, sintered body, and battery