Nothing Special   »   [go: up one dir, main page]

Ozcatalbas, 2003 - Google Patents

Chip and built-up edge formation in the machining of in situ Al4C3–Al composite

Ozcatalbas, 2003

View PDF
Document ID
8707481799183233601
Author
Ozcatalbas Y
Publication year
Publication venue
Materials & design

External Links

Snippet

As a consequence of widening range of applications of metal-matrix composites (MMCs), the machining of these materials has become a very important subject for research. This paper describes a study of chip formation during the machining of MMCs produced by the …
Continue reading at www.researchgate.net (PDF) (other versions)

Classifications

    • B—PERFORMING OPERATIONS; TRANSPORTING
    • B22—CASTING; POWDER METALLURGY
    • B22F—WORKING METALLIC POWDER; MANUFACTURE OF ARTICLES FROM METALLIC POWDER; MAKING METALLIC POWDER
    • B22F3/00—Manufacture of workpieces or articles from metallic powder characterised by the manner of compacting or sintering; Apparatus specially adapted therefor; Presses and furnaces
    • B22F3/20—Manufacture of workpieces or articles from metallic powder characterised by the manner of compacting or sintering; Apparatus specially adapted therefor; Presses and furnaces by extruding
    • C—CHEMISTRY; METALLURGY
    • C22—METALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS
    • C22C—ALLOYS
    • C22C1/00—Making alloys
    • C22C1/04—Making alloys by powder metallurgy
    • C—CHEMISTRY; METALLURGY
    • C22—METALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS
    • C22C—ALLOYS
    • C22C29/00—Alloys based on carbides, oxides, nitrides, borides, or silicides, e.g. cermets, or other metal compounds, e.g. oxynitrides, sulfides
    • C22C29/02—Alloys based on carbides, oxides, nitrides, borides, or silicides, e.g. cermets, or other metal compounds, e.g. oxynitrides, sulfides based on carbides or carbonitrides
    • C—CHEMISTRY; METALLURGY
    • C22—METALLURGY; FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS
    • C22C—ALLOYS
    • C22C1/00—Making alloys
    • C22C1/10—Alloys containing non-metals
    • C22C1/1036—Alloys containing non-metals starting from a melt
    • B—PERFORMING OPERATIONS; TRANSPORTING
    • B22—CASTING; POWDER METALLURGY
    • B22F—WORKING METALLIC POWDER; MANUFACTURE OF ARTICLES FROM METALLIC POWDER; MAKING METALLIC POWDER
    • B22F2998/00—Supplementary information concerning processes or compositions relating to powder metallurgy

Similar Documents

Publication Publication Date Title
Ozcatalbas Chip and built-up edge formation in the machining of in situ Al4C3–Al composite
Ozcatalbas Investigation of the machinability behaviour of Al4C3 reinforced Al-based composite produced by mechanical alloying technique
Canakci et al. Microstructure and properties of AA7075/Al–SiC composites fabricated using powder metallurgy and hot pressing
Kumar et al. Effect of machining parameters on cutting force and surface roughness of in situ Al–4.5% Cu/TiC metal matrix composites
Tekkaya et al. Hot profile extrusion of AA-6060 aluminum chips
Wan et al. Review of solid state recycling of aluminum chips
Labib et al. Dry tribological behavior of Mg/SiCp composites at room and elevated temperatures
Gronostajski et al. New methods of aluminium and aluminium-alloy chips recycling
Tang et al. Influences of friction stir processing parameters on microstructure and mechanical properties of SiC/Al composites fabricated by multi-pin tool
Ahlatci et al. Abrasive wear behavior and mechanical properties of Al–Si/SiC composites
Behera et al. Forgeability and machinability of stir cast aluminum alloy metal matrix composites
Mohapatra et al. Mechanical and tribology properties of Al-4.5% Cu-5% TiC metal matrix composites for light-weight structures
Bahrami et al. Tailoring microstructure and properties of bilayer-graded Al/B4C/MgAl2O4 composites by single-stage pressureless infiltration
Ozer The microstructures and mechanical properties of Al-15Si-2.5 Cu-0.5 Mg/(wt%) B4C composites produced through hot pressing technique and subjected to hot extrusion
EP0282191A1 (en) Metal composites with fly ash incorporated therein and a process for producing the same
Baffari et al. Aluminium sheet metal scrap recycling through friction consolidation
Yang et al. Microstructures and tensile properties of hot isostatic pressed Ti4522XD powders
Liu et al. Microstructure evolution during semi-solid powder rolling and post-treatment of 7050 aluminum alloy strips
Wang et al. Enhanced ductility of Ti3AlC2 particles reinforced pure aluminum composites by interface control
Dhulipalla et al. Synthesis and machining characteristics of novel TiC ceramic and MoS2 soft particulate reinforced aluminium alloy 7075 matrix composites
Tekoğlu et al. Microstructural characterizations and mechanical properties of NbB2 and VB particulate-reinforced eutectic Al-12.6 wt% Si composites via powder metallurgy method
Verma et al. Processing, tool wear measurement using machine vision system and optimization of machining parameters of boron carbide and rice husk ash reinforced AA 7075 hybrid composite
Sweet et al. A microstructural and mechanical property investigation of a hot upset forged 2xxx series aluminum powder metallurgy alloy reinforced with AlN
Paydar et al. Equal channel angular pressing–forward extrusion (ECAP–FE) consolidation of Al particles
Wu et al. Effect of cerium on wettability of mechanically milled Cu-based brazing alloy powder