Nothing Special   »   [go: up one dir, main page]

Mulenga et al., 2014 - Google Patents

Effects of slurry filling and mill speed on the net power draw of a tumbling ball mill

Mulenga et al., 2014

Document ID
6093054705822287294
Author
Mulenga F
Moys M
Publication year
Publication venue
Minerals Engineering

External Links

Snippet

The pool of slurry is known to lower the power drawn to the mill. An attempt to ascertain this observation by relating load orientation to mill power for a range of speeds and slurry fillings was undertaken. To this end, a Platinum ore (− 850 μm) was used to prepare a slurry at 65 …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N23/00—Investigating or analysing materials by the use of wave or particle radiation not covered by G01N21/00 or G01N22/00, e.g. X-rays or neutrons
    • G01N23/02—Investigating or analysing materials by the use of wave or particle radiation not covered by G01N21/00 or G01N22/00, e.g. X-rays or neutrons by transmitting the radiation through the material
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N33/00—Investigating or analysing materials by specific methods not covered by the preceding groups
    • G01N33/38—Investigating or analysing materials by specific methods not covered by the preceding groups concrete; ceramics; glass; bricks
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N23/00—Investigating or analysing materials by the use of wave or particle radiation not covered by G01N21/00 or G01N22/00, e.g. X-rays or neutrons
    • G01N23/20—Investigating or analysing materials by the use of wave or particle radiation not covered by G01N21/00 or G01N22/00, e.g. X-rays or neutrons by using diffraction of the radiation, e.g. for investigating crystal structure; by using reflection of the radiation

Similar Documents

Publication Publication Date Title
Mulenga et al. Effects of slurry filling and mill speed on the net power draw of a tumbling ball mill
Sherritt et al. Axial dispersion in the three-dimensional mixing of particles in a rotating drum reactor
Khosravi et al. Experimental analysis of earth pressure against rigid retaining walls under translation mode
Wang et al. Numerical simulation of particle migration from crushed sandstones during groundwater inrush
Liu et al. Experimental study of the lower and upper angles of repose of granular materials in rotating drums
Wang et al. DEM investigation of energy distribution and particle breakage in tumbling ball mills
Zheng et al. An evaluation of different models of water recovery in flotation
Mori et al. Ball mill simulation in wet grinding using a tumbling mill and its correlation to grinding rate
Govender et al. Comparisons of PEPT derived charge features in wet milling environments with a friction-adjusted DEM model
Oliveira et al. Mechanistic modeling and simulation of a batch vertical stirred mill
Perazzo et al. Numerical modeling of the pattern and wear rate on a structural steel plate using DEM
Ndimande et al. Using two-way coupled DEM-SPH to model an industrial scale Stirred Media Detritor
De Oliveira et al. Modeling and simulation of continuous open circuit dry grinding in a pilot-scale ball mill using Austin's and Nomura's models
McBride et al. An investigation and optimization of the ‘OLDS’elevator using Discrete Element Modeling
Chimwani et al. Scale-up of batch grinding data for simulation of industrial milling of platinum group minerals ore
Ruan et al. A Theoretical Model for the Rake Blockage Mitigation in Deep Cone Thickener: A Case Study of Lead‐Zinc Mine in China
Yin et al. Effect of mill speed and slurry filling on the charge dynamics by an instrumented ball
Artoni et al. Drag in wet granular materials
Golpayegani et al. Modelling the power draw of tumbling mills: A comprehensive review
Katubilwa et al. Effects of filling degree and viscosity of slurry on mill load orientation
Makokha et al. A new approach to optimising the life and performance of worn liners in ball mills: Experimental study and DEM simulation
Kiangi et al. Particle filling and size effects on the ball load behaviour and power in a dry pilot mill: Experimental study
Mulenga et al. Effects of slurry pool volume on milling efficiency
Liu et al. Extraction and imaging of indicator elements for non-destructive, in-situ, fast identification of adverse geology in tunnels
Chen et al. Effects of particle density and fluid properties on mono-dispersed granular flows in a rotating drum