Nothing Special   »   [go: up one dir, main page]

Wang et al., 2021 - Google Patents

High-efficiency bilateral S–SP compensated multiload IPT system with constant-voltage outputs

Wang et al., 2021

View PDF
Document ID
5493722702788991606
Author
Wang Y
Zhao S
Zhang H
Lu F
Publication year
Publication venue
IEEE Transactions on Industrial Informatics

External Links

Snippet

In this article, we propose a bilaterally transmitted domino-type multiload inductive power transfer (IPT) system for constant-voltage (CV) outputs, low voltage attenuation, and high efficiency. There are three major contributions. First, the series–series/parallel (S–SP) …
Continue reading at ieeexplore.ieee.org (PDF) (other versions)

Classifications

    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M7/00—Conversion of ac power input into dc power output; Conversion of dc power input into ac power output
    • H02M7/02—Conversion of ac power input into dc power output without possibility of reversal
    • H02M7/04—Conversion of ac power input into dc power output without possibility of reversal by static converters
    • H02M7/06—Conversion of ac power input into dc power output without possibility of reversal by static converters using discharge tubes without control electrode or semiconductor devices without control electrode
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02B—INDEXING SCHEME RELATING TO CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO BUILDINGS, e.g. INCLUDING HOUSING AND APPLIANCES OR RELATED END-USER APPLICATIONS
    • Y02B70/00—Technologies for an efficient end-user side electric power management and consumption
    • Y02B70/10—Technologies improving the efficiency by using switched-mode power supplies [SMPS], i.e. efficient power electronics conversion
    • Y02B70/14—Reduction of losses in power supplies
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M3/00—Conversion of dc power input into dc power output
    • H02M3/22—Conversion of dc power input into dc power output with intermediate conversion into ac
    • H02M3/24—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters
    • H02M3/28—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac
    • H02M3/325—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac using devices of a triode or a transistor type requiring continuous application of a control signal
    • H02M3/335—Conversion of dc power input into dc power output with intermediate conversion into ac by static converters using discharge tubes with control electrode or semiconductor devices with control electrode to produce the intermediate ac using devices of a triode or a transistor type requiring continuous application of a control signal using semiconductor devices only
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02J—CIRCUIT ARRANGEMENTS OR SYSTEMS FOR SUPPLYING OR DISTRIBUTING ELECTRIC POWER; SYSTEMS FOR STORING ELECTRIC ENERGY
    • H02J5/00—Circuit arrangements for transfer of electric power between ac networks and dc networks
    • H02J5/005—Circuit arrangements for transfer of electric power between ac networks and dc networks with inductive power transfer
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01F—MAGNETS; INDUCTANCES; TRANSFORMERS; SELECTION OF MATERIALS FOR THEIR MAGNETIC PROPERTIES
    • H01F38/00—Adaptations of transformers or inductances for specific applications or functions
    • H01F38/02—Adaptations of transformers or inductances for specific applications or functions for non-linear operation
    • H01F38/023—Adaptations of transformers or inductances for specific applications or functions for non-linear operation of inductances
    • H—ELECTRICITY
    • H01—BASIC ELECTRIC ELEMENTS
    • H01F—MAGNETS; INDUCTANCES; TRANSFORMERS; SELECTION OF MATERIALS FOR THEIR MAGNETIC PROPERTIES
    • H01F27/00—Details of transformers or inductances, in general
    • H01F27/34—Special means for preventing or reducing unwanted electric or magnetic effects, e.g. no-load losses, reactive currents, harmonics, oscillations, leakage fields
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02J—CIRCUIT ARRANGEMENTS OR SYSTEMS FOR SUPPLYING OR DISTRIBUTING ELECTRIC POWER; SYSTEMS FOR STORING ELECTRIC ENERGY
    • H02J7/00—Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries
    • H02J7/02—Circuit arrangements for charging or depolarising batteries or for supplying loads from batteries for charging batteries from ac mains by converters
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02J—CIRCUIT ARRANGEMENTS OR SYSTEMS FOR SUPPLYING OR DISTRIBUTING ELECTRIC POWER; SYSTEMS FOR STORING ELECTRIC ENERGY
    • H02J3/00—Circuit arrangements for ac mains or ac distribution networks
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02M—APPARATUS FOR CONVERSION BETWEEN AC AND AC, BETWEEN AC AND DC, OR BETWEEN DC AND DC, AND FOR USE WITH MAINS OR SIMILAR POWER SUPPLY SYSTEMS; CONVERSION OF DC OR AC INPUT POWER INTO SURGE OUTPUT POWER; CONTROL OR REGULATION THEREOF
    • H02M1/00—Details of apparatus for conversion
    • H—ELECTRICITY
    • H02—GENERATION; CONVERSION OR DISTRIBUTION OF ELECTRIC POWER
    • H02J—CIRCUIT ARRANGEMENTS OR SYSTEMS FOR SUPPLYING OR DISTRIBUTING ELECTRIC POWER; SYSTEMS FOR STORING ELECTRIC ENERGY
    • H02J17/00—Systems for supplying or distributing electric power by electromagnetic waves

Similar Documents

Publication Publication Date Title
Zhang et al. A field enhancement integration design featuring misalignment tolerance for wireless EV charging using LCL topology
Zhang et al. Design of high-power static wireless power transfer via magnetic induction: An overview
Lu et al. A dual-coupled LCC-compensated IPT system with a compact magnetic coupler
Wang et al. High-efficiency bilateral S–SP compensated multiload IPT system with constant-voltage outputs
Chen et al. Modular four-channel 50 kW WPT system with decoupled coil design for fast EV charging
Wang et al. Review of load-independent constant-current and constant-voltage topologies for domino-type multiple-load inductive power relay system
Wang et al. 3.5-kW 94.2% DC–DC efficiency capacitive power transfer with zero reactive power circulating
Ramezani et al. A new wireless EV charging system with integrated DC–DC magnetic element
Zhou et al. Design and analysis of a CPT system with extendable pairs of electric field couplers
Liu et al. General pathways to higher order compensation circuits for IPT converters via sensitivity analysis
Dai et al. A dual-frequency WPT based on multilayer self-decoupled compact coil and dual CLCL hybrid compensation topology
Wang et al. Remaining opportunities in capacitive power transfer based on duality with inductive power transfer
Dongye et al. An S-CLC compensated load-independent inductive power relay system with constant voltage outputs
Chen et al. A parameter tuning method for a double-sided compensated IPT system with constant-voltage output and efficiency optimization
Kavimandan et al. The sensitivity analysis of coil misalignment for a 200-kw dynamic wireless power transfer system with an lcc-s and lcc-p compensation
Atkar et al. Three-phase integrated-optimized power electronic transformer for electric vehicle charging infrastructure
Yang et al. Analysis and design of a high‐efficiency three‐coil WPT system with constant current output
Zhang et al. Achieving misalignment tolerance with hybrid topologies in electric vehicle wireless charging systems
Wang et al. Inductive Power Transfer System with Constant Current-Constant Voltage Charging Tolerating Misalignment Based on Multi-Objective Optimization for Compensation Topology
Asa et al. A tradeoff analysis of series/parallel three-phase converter topologies for wireless extreme chargers
Jayalath et al. Analysis of the relationship between the parameters of IPT transformer and power electronic system
Haghbin Design considerations of a 50 kW compact fast charger stations using nanocrystalline magnetic materials and SiC modules
Mai et al. Variable parameter and variable frequency‐based IPT charging system with configurable charge current and charge voltage
Guo et al. Multiparallel and flexible expansion of single-switch WPT inverter by magnetic integration
Lee et al. Novel transformerless multilevel inductive power transfer system