Nothing Special   »   [go: up one dir, main page]

Yang et al., 2017 - Google Patents

Fatigue crack growth in two TWIP steels with different stacking fault energies

Yang et al., 2017

View PDF
Document ID
4913256440834796978
Author
Yang H
Doquet V
Zhang Z
Publication year
Publication venue
International Journal of Fatigue

External Links

Snippet

Fatigue crack growth tests with R= 0 and 0.4 were carried out on Fe-22Mn-0.6 C and Fe- 22Mn-0.6 C-3Al (wt.%) Twinning-Induced Plasticity (TWIP) steels with stacking fault energies around 21.5 and 37 mJ/m 2, respectively. The former exhibits more crack closure effects …
Continue reading at www.academia.edu (PDF) (other versions)

Classifications

    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/0058—Kind of property studied
    • G01N2203/006—Crack, flaws, fracture or rupture
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/0202—Control of the test
    • G01N2203/0212—Theories, calculations
    • G—PHYSICS
    • G01—MEASURING; TESTING
    • G01N—INVESTIGATING OR ANALYSING MATERIALS BY DETERMINING THEIR CHEMICAL OR PHYSICAL PROPERTIES
    • G01N2203/00—Investigating strength properties of solid materials by application of mechanical stress
    • G01N2203/02—Details not specific for a particular testing method
    • G01N2203/0202—Control of the test
    • G01N2203/021—Treatment of the signal; Calibration

Similar Documents

Publication Publication Date Title
Yang et al. Fatigue crack growth in two TWIP steels with different stacking fault energies
Li et al. In-situ EBSD study of deformation behaviour of 600 MPa grade dual phase steel during uniaxial tensile tests
Malitckii et al. Strain accumulation during microstructurally small fatigue crack propagation in bcc Fe-Cr ferritic stainless steel
Li et al. Effects of compressive residual stress on short fatigue crack growth in a nickel-based superalloy
Zhai et al. The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloys
Li et al. Effect of substructure on mechanical properties and fracture behavior of lath martensite in 0.1 C–1.1 Si–1.7 Mn steel
Choi et al. Effects of the strain rate on the tensile properties of a TRIP-aided duplex stainless steel
Larrouy et al. Grain boundary–slip bands interactions: Impact on the fatigue crack initiation in a polycrystalline forged Ni-based superalloy
Gutierrez-Urrutia et al. Dislocation density measurement by electron channeling contrast imaging in a scanning electron microscope
Fan et al. Research on fatigue behavior evaluation and fatigue fracture mechanisms of cruciform welded joints
Zhou et al. Concurrent phase separation and clustering in the ferrite phase during low temperature stress aging of duplex stainless steel weldments
Grigorescu et al. Cyclic deformation behavior of austenitic Cr–Ni-steels in the VHCF regime: Part I–Experimental study
Pham et al. Role of microstructural condition on fatigue damage development of AISI 316L at 20 and 300 C
Ogawa et al. A fracture mechanics approach to interior fatigue crack growth in the very high cycle regime
Li et al. Effects of strain rate on the microstructure evolution and mechanical response of magnesium alloy AZ31
Kattoura et al. Effect of ultrasonic nanocrystal surface modification on elevated temperature residual stress, microstructure, and fatigue behavior of ATI 718Plus alloy
Strubbia et al. Short crack nucleation and growth in lean duplex stainless steels fatigued at room temperature
De Cooman et al. State-of-the-science of high manganese TWIP steels for automotive applications
Hossain et al. Stability of retained austenite in high carbon steel–Effect of post-tempering heat treatment
Zheng et al. Loading history effect on fatigue crack growth of extruded AZ31B magnesium alloy
Ma et al. Effects of inclusion and loading direction on the fatigue behavior of hot rolled low carbon steel
Fatoba et al. Low cycle fatigue behaviour of API 5L X65 pipeline steel at room temperature
Tanaka et al. A multiscale approach for the deformation mechanism in pearlite microstructure: Experimental measurements of strain distribution using a novel technique of precision markers
Teng et al. Edge cracking mechanism in two dual-phase advanced high strength steels
Zheng et al. Internal crack initiation characteristics and early growth behaviors for very-high-cycle fatigue of a titanium alloy electron beam welded joints