Nothing Special   »   [go: up one dir, main page]

Zainal et al., 2015 - Google Patents

Validation of periodic solution for computing CLTD (cooling load temperature difference) values for building walls and flat roofs

Zainal et al., 2015

Document ID
4501677261882934294
Author
Zainal O
Yumrutaş R
Publication year
Publication venue
Energy

External Links

Snippet

In this study, periodic solution of unsteady heat transfer problem for building walls and flat roofs is firstly used to find the CLTD (cooling load temperature difference) values for these building elements. The solution is obtained by applying CFFT (complex finite fourier …
Continue reading at www.sciencedirect.com (other versions)

Classifications

    • E—FIXED CONSTRUCTIONS
    • E04—BUILDING
    • E04B—GENERAL BUILDING CONSTRUCTIONS; WALLS, e.g. PARTITIONS; ROOFS; FLOORS; CEILINGS; INSULATION OR OTHER PROTECTION OF BUILDINGS
    • E04B1/00—Constructions in general; Structures which are not restricted either to walls, e.g. partitions, or floors or ceilings or roofs
    • E04B1/62—Insulation or other protection; Elements or use of specified material therefor
    • E04B1/74—Heat, sound or noise insulation, absorption, or reflection . Other building methods affording favourable thermal or acoustical conditions, e.g. accumulating of heat within walls
    • E04B1/76—Heat, sound or noise insulation, absorption, or reflection . Other building methods affording favourable thermal or acoustical conditions, e.g. accumulating of heat within walls specifically with respect to heat only
    • E04B2001/7691—Heat reflecting layers or coatings
    • Y—GENERAL TAGGING OF NEW TECHNOLOGICAL DEVELOPMENTS; GENERAL TAGGING OF CROSS-SECTIONAL TECHNOLOGIES SPANNING OVER SEVERAL SECTIONS OF THE IPC; TECHNICAL SUBJECTS COVERED BY FORMER USPC CROSS-REFERENCE ART COLLECTIONS [XRACs] AND DIGESTS
    • Y02—TECHNOLOGIES OR APPLICATIONS FOR MITIGATION OR ADAPTATION AGAINST CLIMATE CHANGE
    • Y02B—INDEXING SCHEME RELATING TO CLIMATE CHANGE MITIGATION TECHNOLOGIES RELATED TO BUILDINGS, e.g. INCLUDING HOUSING AND APPLIANCES OR RELATED END-USER APPLICATIONS
    • Y02B10/00—Integration of renewable energy sources in buildings
    • Y02B10/20—Solar thermal
    • F—MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING ENGINES OR PUMPS
    • F24—HEATING; RANGES; VENTILATING
    • F24J—PRODUCING OR USE OF HEAT NOT OTHERWISE PROVIDED FOR
    • F24J2/00—Use of solar heat, e.g. solar heat collectors
    • F24J2/04—Solar heat collectors having working fluid conveyed through collector
    • F24J2/0422—Solar collectors integrated in fixed constructions, e.g. in buildings

Similar Documents

Publication Publication Date Title
Zainal et al. Validation of periodic solution for computing CLTD (cooling load temperature difference) values for building walls and flat roofs
Fantucci et al. Investigating the performance of reflective insulation and low emissivity paints for the energy retrofit of roof attics
Liu et al. Numerical analysis on thermal performance of a PCM-filled double glazing roof
Ibrahim et al. A study on the thermal performance of exterior walls covered with a recently patented silica-aerogel-based insulating coating
Liu et al. Effects of external insulation component on thermal performance of a Trombe wall with phase change materials
Maalouf et al. Study of hygrothermal behaviour of a hemp concrete building envelope under summer conditions in France
Bekkouche et al. Influence of the compactness index to increase the internal temperature of a building in Saharan climate
Stazi et al. Experimental evaluation of ventilated walls with an external clay cladding
Chwieduk Dynamics of external wall structures with a PCM (phase change materials) in high latitude countries
Bekkouche et al. Thermal resistances of local building materials and their effect upon the interior temperatures case of a building located in Ghardaïa region
Buratti et al. Development and optimization of a new ventilated brick wall: CFD analysis and experimental validation
Zirnhelt et al. The potential energy savings from residential passive solar design in Canada
Xamán et al. Thermal performance of a hollow block with/without insulating and reflective materials for roofing in Mexico
Villar-Ramos et al. Parametric analysis of the thermal behavior of a single-channel solar chimney
Benzaama et al. Study of the effect of sun patch on the transient thermal behaviour of a heating floor in Algeria
Wu et al. CFD simulation of the thermal performance of an opaque water wall system for Australian climate
Kaşka et al. Theoretical and experimental investigation of total equivalent temperature difference (TETD) values for building walls and flat roofs in Turkey
Kabre A new thermal performance index for dwelling roofs in the warm humid tropics
Borodulin et al. Modeling heat and moisture transfer of building facades thermally insulated by the panels with ventilated channels
Kaşka et al. Comparison of experimental and theoretical results for the transient heat flow through multilayer walls and flat roofs
Bruno et al. Bio-PCM to enhance dynamic thermal properties of dry-assembled wooden walls: Experimental results
Hussain et al. Numerical study of buoyancy-driven natural ventilation in a simple three-storey atrium building
Ruivo et al. Prediction of thermal load temperature difference values for the external envelope of rooms with setback and setup thermostats
Prakash Transient analysis and improvement of indoor thermal comfort for an air-conditioned room with thermal insulations
Missoum et al. Numerical simulation of heat transfer through the building facades of buildings located in the city of Bechar