Okuqukethwe
fihla
I-MAPEI MAPECEM Ukusetha I-Screed Mortar
Imininingwane
- Igama Lomkhiqizo: I-MAPECEM
- Uhlobo: Ukusetha okusheshayo nokomisa i-hydraulic binder
- Ukusetshenziswa: Ama-screeds anxeshezelwa ngokuncipha
- Isikhathi Sokomisa: Amahora angama-24 (umswakama osele ungaphansi kuka-2% ngesisindo)
- Izicelo Ezinconyiwe: Ukuqina, izindwangu, izingodo, i-ceramic, noma i-flooring yamatshe
Imiyalo yokusetshenziswa komkhiqizo
Ukulungisa i-Substrate
- Ukuze uthole izinhlelo zokusebenza ezingaboshiwe noma ezintantayo, hlukanisa i-substrate ngeshidi le-polyethylene. Kuma-screeds ahlanganisiwe, qinisekisa ukuthi i-substrate yomile, ayiqhekeki, futhi ayinalo uthuli noma izinto ezixegayo.
Ama-Screed Angaboshiwe (35 - 70 mm ubukhulu)
- Ukulungiselela Imiksi: Hlanganisa i-Mapecem namanzi bese uhlanganisa ibanga ngokushesha imizuzu emi-3-4. Sabalalisa futhi uleveli ingxube phakathi kwemizuzu engama-30 ngemuva kokuxuba.
- Ukusabalalisa Imiksi: Beka ingxube ku-substrate, uqinisekise inani elifanele lamanzi ukuze lihlangane. Sebenzisa ishidi le-polyethylene ukuvimbela ukukhuphuka dampness.
Ama-Screeds antantayo (35 - 70 mm ubukhulu
- Landela ukulungiselelwa okufanayo kwengxube kanye nokusabalalisa imiyalelo njenge-screeds engaboshiwe.
I-Bonded Screeds (ubukhulu obuyi-10 kuye ku-70 mm
- Faka i-Planicrete SP bonding slurry ku-substrate ehlanzekile ngaphambi kokulandela ukulungiswa kwengxube nezinyathelo zokusabalalisa.
FAQ
Q: Ingabe i-Mapecem ingasetshenziselwa ama-screeds adinga ukufakwa kwama-flooring kungakapheli amahora angama-24?
A: Yebo, i-Mapecem ilungele izinhlelo ezinjalo ngenxa yokusetha kwayo okusheshayo kanye nezindawo zokomisa.
Q: Yini okufanele yenziwe uma umsebenzi uphazamiseka isikhathi esingaphezu kwehora eli-1 ngesikhathi sokufaka isicelo?
A: Sika i-screed perpendicularly, faka izingcezu zenduku onqenqemeni, futhi ulungise i-bonding slurry efanelekile ukuze uqinisekise ukubopha okuphelele futhi ugweme ukuqhekeka.
LAPHO ONGASEBENZISA KHONA
- Ukulungiswa kwakho kokubili iziklidi ezintantayo neziboshiwe kuma-slabs akhona namasha okufakwa kokhuni, i-PVC, i-linoleum, amathayela e-ceramic, ukhaphethi, nanoma iyiphi enye indawo yaphansi lapho ukoma ngokushesha kudingeka khona isikhathi esincane sokuphumula.
Olunye uhlelo lokusebenza exampLes
- Ukulungiswa kwama-screeds asethelwe ukukhanya kwethrafikhi ezinyaweni ngemva kwamahora angu-2-3 futhi ome ngokuphelele ngemva kwamahora angu-24, ukuze kufakwe i-parquet kanye nephansi eliqinile.
- Ukulungiswa kwama-screeds alungele ukuthola amathayili e-ceramic netshe lemvelo ngemva kwamahora angu-3-4 kuphela.
- Ukunamathisela nokulungisa ama-screeds ezindaweni ezingaphansi kwethrafikhi eqhubekayo (izitolo ezinkulu, izibhedlela, izikhumulo zezindiza, njll.).
- Ukulungiswa kwama-screeds afaka amasistimu okushisa angaphansi.
IZIMPAWU ZOBUCHWEPHESHE
- I-Mapecem iyisibopho esikhethekile se-hydraulic binder, okuthi, uma ixubene nama-aggregate omile, ahlanzekile namanzi, ibe namandla angavamile okuqina emahoreni ambalwa nje futhi yome ngokuphelele kungakhathaliseki ukujiya kungakapheli amahora angu-24 (umswakama osele ngaphansi kuka-2% isisindo).
- Ngenxa yalezi zici namandla emishini aphakeme kakhulu, i-Mapecem iyisibopho esifanele sezikrini lapho ukuqina, izindwangu, izingodo, izitsha zobumba, noma amatshe kufanele kufakwe phakathi kwamahora angu-24 kuphela.
IZINCOMO
- Ingangeni manzi ngolwelwesi lwe-Mapei oluvimbela amanzi ngemva kwamahora angu-4.
- Ukufakwa kwe-ceramic noma ngamatshe, esimweni sokukhuphuka dampness, unikeze ulwelwesi olufanele lokuvikela amanzi
- Ukufakwa okuqinile, umswakama ohlobene kanye nokufundwa kwezinga le-pH kufanele kwenziwe ku-substrate ekhonkolo nge-AS 1884.
- Uma kudingeka, umgoqo womhwamuko womswakama (ofana ne-Primer MF noma i-Mapeproof 1K Turbo) kufanele usetshenziswe ngaphezu kwe-screed.
- Ungayisebenzisi i-Mapecem exutshwe nomunye usimende, umcako, igypsum, njll.
- Ungayishiyi i-Mapecem eyomile ixubene nama-aggregates (engeza ngokushesha inani elifanele lamanzi futhi usebenzise ngokushesha).
- Ungayixubi iMapecem nesihlabathi esihle kuphela (sebenzisa ama-aggregate ahlelwe ukusuka ku-0 kuye ku-8 mm.
- Ungayixubi iMapecem nenani elinganele lamanzi (lokhu kuzodala ukugeleza kwamanzi kancane futhi kwehlise amandla ayo okusebenza).
- Kunconywa ukuthi uhlanganise ukusikeka kwesaha ukuya kokukodwa kokuthathu kokujula kogqinsi lwe-screed lapho ufaka osayizi abakhulu be-bay.
- Ungashiyi i-Mapecem mix in the mixer isikhathi esingaphezu kwemizuzu engu-3-4.
- Ungayixubi iMapecem nenani eliningi lamanzi (isikhathi sokumisa sizonwetshwa).
- Njengoba i-Mapecem screeds ihlangene kakhulu, ukumuncwa kwamanzi aqukethwe ku-adhesives yokuhlakazwa kwamanzi kuhamba kancane: ngakho-ke kunconywa ukusebenzisa i-Ultrabond P990 1K i-polyurethane adhesive yokufaka amapulangwe phansi azwela kakhulu umswakama.
- Ungawangezi amanzi emiksini elungisiwe futhi ungayixube kabusha iMapecem ngemva kokuthi isiqalile ukusetha.
- Ungamanzisi ubuso be-screed ebekwe ne-Mapecem.
- Ungahlanganisi izitshalo ezihlanganisayo futhi ungathuthi ingxube ngeloli lokuxuba usimende: isikhathi sokumisa se-Mapecem sifushane kakhulu.
INQUBO YOKUFAKA ISICELO
Ukulungisa i-substrate
- Ngohlelo lokusebenza olungaboshiwe noma oluntantayo, wonke ama-substrates afanele ukuthola i-Mapecem screed. Hlukanisa i-substrate ngeshidi le-polyethylene noma into efanayo.
- Kuma-screeds ahlanganisiwe, i-substrate kufanele yome, ingabi nemifantu, imelane namandla acindezelayo futhi aqine, futhi ingabi nothuli, izinto ezixegayo, upende, i-wax, uwoyela, kanye neminonjana ye-gypsum. Amalungu akhona ku-substrate kufanele ahanjiswe nge-screed.
Ama-screed angahlanganisiwe
(35 – 70 mm ubukhulu)
Ukulungiselela imiksi
- I-Mapecem kufanele ixutshwe ngokucophelela futhi ngokushesha, ngamanzi kanye nezilinganiso ezilinganiselwe 0-8 mm ububanzi, isikhathi esiphezulu semizuzu engu-3-4, ku-mixer noma i-batcher.
- Ukuxuba kufanele kusatshalaliswe futhi kulinganiswe ngesikhathi esifushane kakhulu futhi kungabi ngaphezu kwemizuzu engama-30 ngemuva kokuxuba.
- Ukunakekelwa okukhethekile kufanele kuthathwe ngenani lamanzi okufanele anele ukwakha inqwaba ehlangene ukuzeamping inikeza indawo eyisicaba ngaphandle kwefilimu kasimende.
Ama-mapecem aggregates namanzi angaxutshwa:
- kumxube wezigubhu
- ku-mixer evamile kakhonkolo
- ku-screw mixer
- ngesandla, ngefosholo.
- Ingxube ye-Mapecem ingafakwa kusetshenziswa ipompo yokucindezela okuzenzakalelayo.
- Kunoma yikuphi kudingekile ukuba ulandele ngokuqinile imiyalelo mayelana nomthamo kanye nesikhathi sokuxuba.
Ukusabalalisa imiksi
- Ingxube ye-Mapecem ifakwa ku-substrate njenganoma yimuphi ukhonkolo ojwayelekile. Ishidi le-polyethylene kufanele libekwe (ngisho naphezu kolwelwesi lwe-bituminous noma enye i-substrate ekhona yokuvimbela amanzi) ukuze kwakhiwe ungqimba olugeleza kalula phakathi kwe-Mapecem screed kanye ne-substrate ekhona kakade futhi ngesikhathi esifanayo ukuvimbela noma yikuphi ukukhuphuka dampness.
- Kuma-substrates acindezelwayo, izindawo ezinamapayipi, noma ezinogqinsi oludlula u-60 mm, zifaka ukuqina kwensimbi nge-AS 3958.1.
- I-Mapecem screeds ilungiswa kusetshenziswa izindlela ezifanayo nalezo ezijwayelekile zikasimende: ukulungisa imichilo yokulinganisa, ukusabalalisa ingxube ngokuyihlanganisa ngokunembile, bese kuthi t.ampukuze uthole indawo engcono yokuqeda.
- Ezizungeze umjikelezo wendawo namakholomu njll., kunconywa ukuthi ufake i-anti-fracture engu-1 cm obukhulu (njengebhodi elizwakalayo, ukhokho, i-polystyrene, njll.).
- Uma umsebenzi uphazamiseka isikhathi esingaphezu kwehora elingu-1, kuyadingeka ukusika i-screed perpendicularly bese ufaka izingcezu zenduku (20-30 cm ubude no-3-6 mm ububanzi) emaphethelweni e-screed.
- Kufanele zifakwe ngokuhlukana okungama-20-30 cm ukuze kuqinisekiswe ukubophana okuphelele nokugwema imifantu namazinga ahlukene futhi kulungiswe udaka olufanele lokubopha.
Izikrini ezintantayo
(35 – 70 mm ubukhulu)
- I-screed mix ilungiselelwe futhi isetshenziswe ngendlela efanayo ne-screed engahlanganisiwe. Umehluko wukuthi ama-screeds antantayo ahlanganisa ukufakwa noma amasistimu okushisa.
- I-insulation kufanele ibe nokumelana okuphezulu kokucindezela futhi ingacindezeli ngaphezu kuka-3 mm ngaphansi komthwalo wokugcina olindelwe.
- Lapho amapayipi okushisa angaphansi efakwe, kufanele abekwe ubuncane obungama-25 mm ngaphansi kobuso besikrini. Ukwengeza i-reinforcing mesh kufanele ibekwe phezu kwamapayipi.
- Ukushisa kwangaphansi kungase kusetshenziswe ngemva kwezinsuku ezi-4.
Ama-screeds ahlanganisiwe
(10 kuya ku-70 mm ubukhulu)
- Ukulungiselela ingxube, izilinganiso, nokusabalalisa ingxube kuyafana neziklidi ezintantayo, kodwa okokuqala, kuyadingeka ukufaka i-Planicrete SP bonding slurry ku-substrate ehlanzekile ngokuphelele.
Umthamo we-bonding slurry
- I-Planicrete SP: 1 ingxenye ngesisindo
- I-Mapecem: 1 ingxenye ngesisindo
- Ukuze uqinisekise ukubopha, i-slurry kufanele ifakwe endaweni ewugqinsi ongu-2-3 mm odinga ukumbozwa ngaphambi nje kokufakwa kwe-Mapecem screed (entsha kumasu amasha).
- Kuma-screeds ahlanganisiwe angaphezu kuka-50 mm ubukhulu, kuyanconywa ukuthi kuhlanganiswe ukuqiniswa kwe-galvanized mesh ngaphansi kwe-AS 3958.1.
UKUkala OKUQUKETHWE UMSAKA
- Ama-hygrometer e-elekthronikhi ahlinzeka ngamavelu ayizinkomba kuphela okulinganisa umswakama. Izinga lomswakama elisele le-Mapecem screeds kumele likalwe nge-carbide hygrometer, ehlinzeka ngamavelu aphelele omswakama ngesisindo.
Ukuhlanza
- Amathuluzi ahlanzwa ngamanzi amaningi.
UKUDLA
- Ukusetshenziswa kuyahlukahluka kuye ngobukhulu be-screed kanye nenani le-Mapecem.
- Ku-350-450 kg we-Mapecem ngem³ ngayinye yenhlanganisela, ukusetshenziswa kungu-3.5-4.5 kg/m² nge-cm yogqinsi.
UKUPAKASHA
- 20 kg izikhwama.
ISITOREJI
- Izinyanga eziyi-12 endaweni eyomile ekupakisheni kwangempela. Nokho, ngokuhamba kwesikhathi, isikhathi sokusetha singahamba kancane ngaphandle kokushintsha ukusebenza kokugcina
| IDATHA YOBUCHWEPHESHE (amanani ajwayelekile) | |
| PRODUCT IDENTITY | |
| Ukuvumelana: | impushana |
| Umbala: | impunga |
| Ukuminyana kwenqwaba (kg/m³): | 1,300 |
| Okuqukethwe okuqinile okomile (%): | 100 |
| Ukuhlukaniswa kwezingozi ngokuya nge-EC 1999/45: | ecasulayo. Ngaphambi kokusebenzisa bheka "Imiyalo yokuphepha yokulungiselela nokusebenzisa" kanye nolwazi lokupakishwa kanye ne-Safety Data Sheet. |
| IDATHA YESICELO (ku +23°C – 50% RH) | |
| Isilinganiso sokuxuba esinconyiwe: | 350-450 kg ye-Mapecem ne-1 m³ aggregate (kusuka ku-0 ukuya ku-8 mm ububanzi) kanye no-80-160 kg wamanzi, kuye ngomswakama osekuhlanganisweni. |
| Ukuminyana kwengxube (kg/m³): | 2,200-2,250 |
| Ubude besikhathi sokuxuba: | 3-4 imizuzu |
| Isikhathi sokuvula semiksi: | 20-30 imizuzu |
| Ibanga lokushisa lohlelo lokusebenza: | ukusuka +5°C kuya +35°C |
| Setha ithrafikhi yonyawo elula: | 2-3 amahora |
| Ilungele ukusetshenziswa: | 24 amahora |
| Ilungele ukuleveliswa: | ngemva kwamahora angu-4 |
| Isikhathi sokulinda ngaphambi kokufakwa: | Amahora angu-3 amathayela e-ceramic nezinto zamatshe Amahora angu-24 okokumboza okuqinile nokhuni |
| Umswakama osele ngemva kwamahora angu-24 (%): | <2 |
| IMISEBENZI YOKUGCINA | |
| Ukumelana nama-acids: | fair |
| Ukumelana ne-alkali: | kuhle kakhulu |
| Ukumelana nowoyela: | kuhle kakhulu |
| Ukumelana nama-solvents: | kuhle kakhulu |
| Izinga lokushisa uma isetshenziswa: | kusuka -30 ° C kuya +90 ° C |
| Amandla omshini: | bona amathebula namagrafu |
| Amandla omshini we-Mapecem enesanti esingu-0-8 mm | |||||||||
| Ingxenye ye-Mapecem | Amandla e-Flexural (N/mm²) | Amandla acindezelayo (N/mm²) | Umswakama osele (%) | ||||||
| 24 h | 3 gg | 28 gg | 24 h | 3 gg | 28 gg | 24 h | 3 gg | 28 gg | |
| 350 kg/(m³ isihlabathi) | 5.4 | 6.7 | 7.0 | 33.0 | 42 | 47 | 2 | 1.6 | 1.5 |
| 400 kg/(m³ isihlabathi) | 5.6 | 7.0 | 7.5 | 40.5 | 47 | 53 | 1.8 | 1.3 | 1.2 |
| 450 kg/(m³ isihlabathi) | 6.6 | 7.5 | 8.0 | 47.0 | 51 | 57 | 1.6 | 1.2 | 1.1 |
| Izilinganiso ezinconyiwe | |
| I-Mapecem: | 350-450 kg |
| Izilinganiso ezilinganiselwe ukusuka ku-0 kuye ku-8 mm Itshetshana 0-8: | 1 m³ |
| Amanzi: | kusuka ku-80 kuya ku-160 kg kuye ngomswakama osekuhlanganisweni |
| kulingana ne: | |
| I-Mapecem: | isikhwama esisodwa esingama-20 kg |
| Izilinganiso ezilinganiselwe ukusuka ku-0 kuye ku-8 mm Itshetshana 0-8: | 80-100 kg noma 13-15 amafosholo |
| Amanzi: | kusuka ku-4 kuya ku-8 kg kuye ngomswakama osekuhlanganisweni |
IZIYALELO ZOKUPHEPHA
IMIYALELO YOKUPHEPHA YOKULUNGISELELA KANYE NESICELO
- Ukuze uthole ulwazi olwengeziwe noluphelele mayelana nokusetshenziswa okuphephile komkhiqizo wethu sicela ubheke inguqulo yakamuva yokuphepha kwethu
- I-Data Sheet iyatholakala ukuze ilandwe kwethi webindawo ku www.mapei.com.au.
- UMKHIQIZO WOKUSETSHENZISWA NGOBUCHWEPHESHE.
I-МАРЕСЕМ: IDATHA YOBUCHWEPHESHE
- Izilinganiso ze-Mapecem: amatshe kusuka ku-4 kuye ku-8 mm nesihlabathi kusuka ku-0 kuye ku-4 mm
- Ukuvumelana okulungile kwe-Mapecem
- Ukuxuba i-Mapecem neyunithi yokumpompa okuzenzakalelayo
- Ukumboza amapayipi nge-Mapecem kanye nenethi yokuqinisa
- Ukuxuba i-Mapecem ku-mini-batcher
- Ukusabalalisa i-anchoring slurry ye-Mapecem screeds eboshiwe
- Ukuqedela i-Mapecem screed nge-Ultraplan self-leveling compound
- Ukuhlanganisa imiksi ye-Mapecem
- Ukulungisa umucu wokuleveling
- Ukusebenzisa i-straight-edge
- Tampekhala uMapecem
- Ukubekwa nokushelela kwe-Mapecem screed – Sistine Halls – Vatican City
- I-Carbide hygrometer yokulinganisa izinga lokuswakama kwe-Mapecem screed
- I-Electronic hygrometer yokulinganisa izinga lokuswakama kwe-Mapecem screed
- I-Mapecem: i-screed ekahle yazo zonke izinhlobo ze-flooring
- Hlanganisa i-Mapecem ne-Planicrete SP ukuze wenze i-bonding slurry
ISEXWAYISO
- Nakuba imininingwane yobuchwepheshe nezincomo eziqukethwe kuleli phepha ledatha yomkhiqizo ihambisana nolwazi olungcono kakhulu kanye nolwazi lwethu, yonke imininingwane engenhla kufanele, kuzo zonke izimo, ithathwe njengenkomba nje futhi ingaphansi kokuqinisekiswa ngemuva kokusetshenziswa okusebenzayo kwesikhathi eside: kulokhu. isizathu, noma ubani ohlose ukusebenzisa umkhiqizo kumele aqinisekise kusenesikhathi ukuthi ulufanele uhlelo oluhlosiwe: kuzo zonke izimo, umsebenzisi yedwa unesibopho esiphelele sanoma yimiphi imiphumela evela ekusetshenzisweni komkhiqizo.
- Sicela ubheke inguqulo yamanje ye-Technical Data Sheet etholakala kwethi webindawo www.mapei.com.au
ISAZISO SOMTHETHO
- Okuqukethwe kwaleli shidi ledatha yezobuchwepheshe (“TDS”) kungase kukopishelwe kwenye idokhumenti ehlobene nephrojekthi, kodwa idokhumenti ewumphumela ngeke yengeze noma ithathele indawo izimfuneko nge-TDS ngayinye eyayisebenza ngesikhathi sokufakwa komkhiqizo we-MAPEI.
- I-TDS yakamuva kakhulu ingalandwa kwethi webindawo www.mapei.com.au.
- NOMA YIKUPHI UKUGUQULWA KWAMAGAMA NOMA IZIDINGO EZIQUKETHWE NOMA EZITYHIWA KULE TDS AKUHLANGANISI ISIBOPHO SAMAPEI.
- Kevmor Trade Supplies
- 11 Belmont Avenue, Belmont WA 6104
- Ucingo: 08 9277 7177
- E: sales@kevmor.com.au
- W: kevmor.com.au
- 201-12-2011-gb
- Noma yikuphi ukukhiqizwa kwemibhalo, izithombe, nemifanekiso eshicilelwe lapha kwenqatshelwe futhi kungaphansi kokushushiswa
Amadokhumenti / Izinsiza
| I-MAPEI MAPECEM Ukusetha I-Screed Mortar [pdf] Umhlahlandlela Womsebenzisi I-MAPECEM Isetha i-Screed Mortar, i-MAPECEM, i-Screed Mortar, i-Screed Mortar, i-Mortar |
Izithenjwa
-
I-Kevmor Wholesale Trade Supplies - Isitolo Samathuluzi E-Perth Flooring & Imikhiqizo Yokuthuthukisa Ikhaya | Thenga Esitolo Futhi Ku-inthanethi
-
I-Mapei - ama-adhesives, ama-sealants, imikhiqizo yamakhemikhali yokwakha
- Imaniwali yosebenzisayo
