SATCO NUVO TH903 Style Track Heads
ọja Alaye
H-STYLE TRACK HEADS
- Awọn awoṣe: TH903, TH904, TH913, TH914
- Olupese: Awọn ọja Satco, Inc.
- Ibi: Brentwood, Ọdun 11717
Awọn pato
- Awọn nọmba awoṣe: TH903, TH904, TH913, TH914
- Track Head Style: H-Style
- Olupese: Awọn ọja Satco, Inc.
- Ibi: Brentwood, Ọdun 11717
Awọn ilana Lilo ọja
- Before installing the track head, refer to the track installation instructions to make sure the track head and the track are compatible.
- Turn OFF switch at main power source before installing any track or fitting.
- Pull down the locking lever and insert “Adapter Contact” into the slot in the track.
- Rotate adapter 90° to locked position. NOTE: Polarity line of track head (2 prong side) must point towards the polarity line on the track (indented line) when installed.
- Lati yọ kuro: Pull down the locking lever on the track adapter and turn the track head 90°.
IKIRA: To reduce the risk of fire, electrical shock or personal injury, do not touch or remove the track head on the track when the light is on. Instead, turn off the electrical power.
FAQ
Q: Can I use any track with these track heads?
A: It is recommended to refer to the track installation instructions to ensure compatibility between the track head and the orin.
Q: What should I do if the light is on and I need to adjust the track head?
A: To avoid risks, always turn off the electrical power before touching or removing the track head when the light is on.
Q: How do I know if the track head is properly installed?
A: Ensure that the Adapter Contact is securely inserted into the slot in the track and that the locking lever is engaged.
Awọn iwe aṣẹ / Awọn orisun
| SATCO NUVO TH903 Style Track Heads [pdf] Ilana itọnisọna TH903, TH904, TH913, TH914, TH903 Style Track Heads, TH903, Style Track Heads, Track Heads, Heads |