Isikhululo sokuDokisha se-SABRENT DS-UNHC
ISCHEMATIC DIAGRAM YOKUBONAKALA KWEMVELISO
- A: Clone iqhosha lokuqala
- B: Ukutshintsha ulwalathiso lwe-Cloning
- C: I-USB 3.2 (1 OGbps) Uhlobo lwe-C port D: igalelo le-DC 12V
- E: Ukutshintsha kwamandla
IMVELISO INTSHAYELELO
- Uyilo oluthambileyo, olune-engile ukuze ulungele umdlalo wakho wokuhombisa. Umphandle we-aluminiyam kwakhona uyinjineli ukunceda ukutshatyalaliswa kobushushu ngexesha lenkqubo ye-cloning.
- Isixhobo esingenaso sokufaka kunye nenkqubo yokukhupha yenza ukuba idokhi ibe lula ukuyisebenzisa. I-interface ye-SATA nayo inesikhuselo sokukhusela.
- Ixhasa izinto ezininzi ze-M.2 ze-SSD ezibandakanya i-2242, i-2260, kunye ne-2280.
- I-USB 3.2 (1 0Gbps) izinga lokudlulisela ukufikelela okuphendulayo.
- Ixhasa i-M.2 PCle NVMe drives nge-PCle 3.0 iindlela ezimbini.
- Ixhasa i-SSD TRIM kunye nemisebenzi ye-UASP.
- I-downlink ixhasa zombini i-PCle kunye ne-SATA ye-interface protocols ngaxeshanye. Zombini iidrive zinokuboniswa kwaye zifikeleleke ngexesha elinye.
- Isebenzisa ujongano lwe-USB Type-C ukuze kube lula.
- Ixhasa i-cloning ye-bidirectional nge-cloning direction switch.
- Inezalathi ezine ze-LED ezibonisa inkqubela ye-cloning ngexesha lokwenyani.
- Iplagi kwaye udlale kungekho baqhubi bafunekayo. Ishushu-eguquguqukayo.
UMSEBENZI WEMVELISO
- Cinezela kwaye ubambe iqhosha le-clone imizuzwana emi-3-5 de zonke ii-LED ziqale ukuqhwanyaza, emva koko ucofe kabini iqhosha le-clone ukuqalisa ukwenza i-cloning.
Phawula:
- Phambi kokwenza i-cloning, qinisekisa ukuba umthombo we-drive uyalingana okanye umncinci kumthamo kunendawo ekuyiwa kuyo kwi-cloning pair. Ukongeza, jonga kabini isalathiso sokutshintsha kwe-clone, kungenjalo, impazamo inokubangela ukulahleka kwedatha ngengozi.
IMEKO YOKUKHANYA kwe-LED
- Ukukhanya kwamandla - blue. Hlala uvuliwe xa umbane uvuliwe.
- Izibane ze-M.2 kunye ne-SATA zokuqhuba - blue, kunye nokuzimela. Iya kulayita xa i-drive ifakiwe. Iza kudanya ngexesha lofikelelo lokufunda/lokubhala. Ukukhanya kuya kuzicima ngokuzenzekelayo kwimowudi yokulala emva kwemizuzu engama-30 yokungenzi nto.
- Isalathisi senkqubela phambili yeClone - mhlophe, amacandelo amane. Icandelo ngalinye libonisa i-25% yenkqubela-phambili yenkqubo yokudibanisa kunye nezine ezikhanyisiweyo ekugqityweni kwe-100%.
- Ukuba indawo ekuyiwa kuyo incinci kunomthombo odibeneyo wokuqhuba isalathisi senkqubela phambili ye-clone siyakugcwalisa kwaye impazamo iya kuxelwa ngokudanyaza kabini.
INDLELA YOKUFAKA
M.2 SSD KUNYE 2.5″/3.5″ SATA SSD Ii HOD
INYATHELO 1
- Vula i-M.2 SSO slot umnyango weheatsink phambi kwemveliso njengoko kubonisiwe ngasentla, kwaye i-M.2 M Key socket ibonakalisiwe
INYATHELO 2
- Njengoko kuboniswe kumfanekiso ongentla, faka i-M.2 SSD ngokuthe nkqo kwi-M.2 socket yesikhululo sokumisa; nceda unikele ingqalelo kwindawo yesikhewu sokutshixa kwaye ungafaki i-drive ngenkani
INYATHELO 3
- Vala umnyango we-heatsink ukugqiba ukufakela; qhagamshela intambo ye-USB ukunika amandla kunye nokufikelela kwi-drive
INYATHELO 4
- Faka i-2.5 ″/3.5″ SSD okanye i-HOD kwi-slot ephezulu kwi-orientation echanekileyo ukufanisa izihlanganisi; xa usebenzisa i-3.5″ HOD isikhululo sokumisa kufuneka sibe neadaptha yombane eqhagamshelwe
IZAZISO
- Xa usebenzisa le mveliso ngexesha lofakelo lwe-M.2 SSD nceda uqaphele ukuphepha ukukhutshwa kombane we-static kwi-drive (Kucetyiswa ukuba ubeke izandla zakho kwizinto zetsimbi ukuze ukhuphe ngokukhuselekileyo ngaphambi kokuphatha).
- Le mveliso isebenzisa i-M Key interface eyeye-NVMe protocol. Xa ufaka i-M.2 SSD yale mveliso nceda uqinisekise ukuba i-drive yi-NVMe kunye ne-keying efanelekileyo.
- Faka kuphela i-M.2 SSD xa umbane ucinyiwe kwaye intambo ye-USB ivaliwe.
- Xa ufaka i-2.5″/3.5″ SSD okanye i-HOD nceda uqaphele ukufaka ngobunono kangangoko ukuphepha ukukrwela amacandelo kwi-motherboard.
- Xa uqhaqha kwaye ufaka isikhululo sokumisa nceda uphathe zonke izincedisi ngononophelo ukuze uthintele ilahleko.
- Xa usebenzisa zombini iibhayi ngaxeshanye, nokuba kukufikelela okanye kukwenza i-cloning, qiniseka ukuba uqhagamshela iadaptha yamandla. Isidibanisi se-USB ngokwaso sinokubonelela kuphela amandla awoneleyo kwidrayivu enye.
- Sebenzisa "i-hardware yokususa ngokukhuselekileyo" yenkqubo yokusebenza ngaphambi kokuba ukhuphe isikhululo sokumisa kwikhompyuter.
UMBUZO OQHELE UKUBUZWA
Kutheni ukusebenza kucotha, kungafikeleli kwisantya sokufunda nokubhala se-USB 3.1 Gen2 kwinkqubo yam?
Le mveliso iye yavavanywa ngokungqongqo kwaye isantya sokufunda nokubhala sinokufikelela kwintsebenzo ye-USB 3.1 phantsi kweemeko eziqhelekileyo zokufunda nokubhala. Ukuba isantya sokufunda nokubhala sicotha, kuyacetyiswa ukuba uqinisekise ukuba i-USB host port oqhagamshelwe kuyo iyakwazi ukwenza isantya se-1 0Gbps; ukuba akunjalo, izantya ziya kulinganiselwa kwi-USB 3.0 okanye i-2.0 ngokuxhomekeke kuhlobo lwezibuko.
Ngaphantsi kweWindows, emva kokuba i-drive entsha ifakwe, kutheni, ndifumana i-drive okanye i-drive letter ehambelanayo kwiKhompyutha yam?
Xa usebenzisa i-drive entsha okokuqala kufuneka uqalise, ukufomatha, kunye nokwahlula idisk esanda kongezwa kuLawulo lweDiskhi phantsi koLawulo lweKhompyutha ngaphambi kokuba idrayivu ifikeleleke ngokuqhelekileyo.
Kutheni, inkqubo yeWindows XP ibona idrayivu enomthamo ongaphezulu kwe-2TB?
Ngenxa yothintelo lwenkqubo yokusebenza yeWindows XP, amandla okuqhuba anokuqatshelwa kwinkqubo ayinakudlula i-2TB. Iidrive ezinkulu zixhaswa kuphela ziikhompyuter ezisebenzisa i-64-bit Windows Vista okanye ngaphezulu. Kuyacetyiswa ukuba uguqule idiski kwidiski ye-GPT, kungenjalo izahlulelo zokuqhuba ezinkulu kune-2TB aziyi kuxhaswa.
Ndizikhusela njani iidrives kunye nedatha yazo emva kokusetyenziswa?
Kuyacetyiswa ukuba umsebenzisi asebenzise ngokukhuselekileyo usetyenziso lwehardware yesixokelelwano sokusebenza phambi kokuqhawula uqhagamshelwano lwesikhululo sokuchwela.
Ngaba iiprotocol zeNVMe zingasetyenziswa kwiWindows ngaphambi kwenguqulo 8.1?
Windows 7/8 iisistim zokusingatha zinokufuna ukufaka ipatch yenkxaso yeNVMe. IWindows 8.1 kunye neenguqulelo zamva zinomqhubi odibeneyo weNVMe.
Kutheni le nto inokubonwa idrayivu enye kuphela kwiKhompyutha yam emva kwenkqubo ye-cloning?
Emva kokuba i-hard disk yenziwe i-ID yokuchongwa kwee-drives zifana ncakasana kwaye inkqubo yokusebenza inokuqaphela enye ngexesha. Enye idrayivu iya kuboniswa njenge-offline kuLawulo lweDiski.
Ngaba le mveliso inokusetyenziselwa ukubumba inkqubo yokusebenza?
Le mveliso isekelwe kwi-clone ye-hardware ye-drive engachaphazeli ukusetyenziswa kwenkqubo yokusebenza emva kwe-cloning eyimpumelelo. Nangona kunjalo, ngenxa yotshintsho kwiimeko zokusebenza ze-hardware kunye ne-software emva kwe-cloning, ukungahambelani komqhubi kunokubangela ukusilela kwe-boot system. Ngeengxaki ezingezizo ezale mveliso, nceda ufune inkxaso yobugcisa yomntu wesithathu ukuze ufumane izisombululo. Umzekeloample, emva kokudibanisa inkqubo yokusebenza ye-SSD ye-SATA yoqobo kwi-NVMe SSD, umqhubi wenkqubo yokusebenza unokungahambelani, imeko engaphandle kwendawo yenkxaso yobugcisa yesi sixhobo. Kuya kufuneka wenze umsebenzi we-NVMe ngokwebhodi yakho yekhompyuter kunye / okanye ukusombulula ukuhambelana komqhubi wenkqubo yokusebenza. Ukongeza, uguqulelo lwe-encryption kunye ne-identification-locking systems inokubangela imiba engeyiyo impazamo yobugcisa besixhobo; Nceda uqhagamshelane nomphathi wenkqubo.
Ingaba ubuthongo busebenza njani kwesi sixhobo?
Esi sixhobo singena kwindawo yokulala emva kwemizuzu engama-30 yokungabikho kokufunda okanye ukubhala ngokungagqibekanga, kwaye sivuka ngokuzenzekelayo xa kukho umsebenzi wokufunda okanye wokubhala kwakhona, konke oko ngaphandle kokungenelela okwenziwa ngesandla. Nangona kunjalo, ukuba inkqubo yokusebenza ngokwayo inomgaqo-nkqubo we-hibernation, esi sixhobo siyakuthobela ngokukhethekileyo inkqubo yokusebenza enokuthi ingahambelani nemizuzu engama-30 yexesha le-hibernation yesi sixhobo; le yinto eqhelekileyo.
Amaxwebhu / Izibonelelo
| Isikhululo sokuDokisha se-SABRENT DS-UNHC [pdf] Incwadi yomsebenzisi DS-UNHC Docking Station, DS-UNHC, Docking Station, Station |