Ciro 48010 Distribution Block Installation Guide

Imixholo fihla

1 Ciro 48010 Distribution Block

2 Imiyalelo yokusetyenziswa kwemveliso

3 FAQ

4 Ulwazi lweMveliso

5 Amacandelo aBandakanyiweyo

6 Ukuhlohla

7 Amaxwebhu / Izibonelelo

7.1 Iimbekiselo

8 Izithuba eziyeleleneyo

Ciro 48010 Distribution Block

Iinkcukacha:

Model: Goldstrike3D Motorcycle Light Kit

Output: Supports up to 10 AMP max
Functions: Brake (Blue), Right Turn (Green), Left Turn (Yellow), Run (Brown), Ground (White)

Webindawo: www.goldstrike3d.com

Imiyalelo yokusetyenziswa kwemveliso

Amanyathelo okuFakela:

Park your motorcycle on a level surface and allow the engine to cool down before starting the installation.
Susa isihlalo kwaye usibeke ecaleni.

Locate and disconnect the stock right and left harness.
Plug the two provided harness adapters into the existing harnesses. Note that there is no distinction between right and left adapters.

Position the distribution block between the gas tank and the rear fender, ensuring the trailer relay connector wires run along the fender with the right and left indicators facing the corresponding sides of the motorcycle.
Connect the plugs from the installed harnesses to each side of the distribution block.

Run the positive and ground wires from the distribution block \under the frame bar to the battery. Connect the positive lead first followed by the ground connection.
Connect the wires from the lights to the correct right and left\ sides of the distribution block and plug them in. Consider tagging the wires to identify each light for future reference.

For any unused ports, install the provided plugs to ensure weather-resistant protection. These plugs can be separated by cutting the connector between them using a knife or scissors.
Attach any necessary cable ties and reinstall the seat.

FAQ

Q: What functions do the colored wires support?
- A: The colored wires support the following functions: Brake (Blue), Right Turn Signal (Green), Left Turn Signal (Yellow), Running Light (Brown), Ground (White).

Q: What is the maximum supported output of the product?
- A: The product supports a maximum output of up to 10 AMPs.

Umbuzo: Ndingalufumana phi uguqulelo lwamva nje lwemiyalelo yokuhlohla?
- A: For the most up-to-date installation instructions, visit the official webindawo kwi www.goldstrike3d.com

Olu phawu lukwazisa ngenyaniso yokuba ukutyeshela iziqulatho ezichazwe apha kunokubangela ukwenzakala okumandundu okanye ukufa ukuba akulandelwa.
Esi sibonakaliso sikwazisa ngento yokuba ukutyeshela iziqulatho ezichazwe apha kunokubangela okanye kuya kubangela umonakalo wezinto eziphathekayo kunye / okanye ukwenzakala komntu.
Esi sibonakaliso sikwazisa ngenyani ukuba awuyihoyi le nkcukacha uya kuchaphazela ukusebenza okanye ukusebenza kwemveliso.

Ulwazi lweMveliso

Zonke iimveliso zeCiro zenzelwe "indibano elula" kunye / okanye "iplagi kunye nokudlala". Sicebisa umkhandi onobuchule afakele iimveliso zethu, esebenzisa iinkqubo zoomatshini ezisemgangathweni ukuqinisekisa ukhuseleko nofakelo oluyimpumelelo. Funda ngokupheleleyo kwaye uqonde imiyalelo phambi kokuba uqalise ukufakela. QAPHELA: Iimveliso zeCiro ziyilwe kwaye zenziwe phantsi kolawulo olungqongqo kakhulu. Iziqinisekiso ze-Ciro zokuba iimveliso ezithengiswa kumthengi wokuqala ziya kukhululeka kuzo naziphi na iziphene kwimathiriyeli kunye nokusebenza ixesha le-3 (emithathu) iminyaka ukusuka kumhla wokuthenga, kunye newaranti elinganiselweyo yobomi ngokuchasene nokusilela kwe-LED. UCiro akayi kuba namfanelo ukuba umthengi akakwazi ukubonisa ubungqina bokuthenga. Iwaranti ayiyi kunikwa ngaphandle kokuba inxalenye ifakwe ngokufanelekileyo, ayilungiswanga kwaye igcinwe. I-Ciro ayiyi kuba noxanduva lwawo nawuphi na umonakalo obangelwayo kunye nomonakalo onokwenzeka, kubandakanywa abasebenzi, okanye iimveliso ezingezizo ze-Ciro. Nceda undwendwele iCiro3d.com ngepolisi yethu epheleleyo yewaranti.

Amacandelo aBandakanyiweyo

Ukuhlohla

Paka kwindawo esemgangathweni kwaye uqinisekise ukuba injini inexesha lokupholisa phambi kofakelo.
Susa isihlalo kwaye ubeke ecaleni.

Khangela kwaye ukhuphe isitokhwe sokubopha ekunene nasekhohlo. Umzobo 1
Xhuma iiadaptha zokubopha ezimbini ezibonelelweyo kwiintambo ezikhoyo. Akukho kunene nasekhohlo, zombini ziyafana. Umzobo 2

Position the distribution block between the gas tank and the rear fender, sliding the trailer relay connector wires up along the fender. The right and left indicators on the front of the distribution block indicate the right and left sides of the motorcycle. Fig. 3
Xhuma iiplagi ezivela kwii-harnesses ezifakwe kwicala ngalinye kwibhloko yokusabalalisa umfanekiso we-4

Baleka iingcingo ezilungileyo kunye neziphantsi ukusuka kwibhloko yokusabalalisa phantsi kwebar yefreyimu kunye nebhetri. Qhagamshela isikhokelo esilungileyo kuqala uze emva koko udibanise umhlaba. Isazobe sesi-5
Qhuba iingcingo ukusuka kwizibane ukuya kwicala lasekunene kunye nasekhohlo elihambelanayo kwibhloko yosasazo kunye neplagi. Umfanekiso wesi-6 kunokuba luncedo ukucwangcisa izibane zakho tagiingcingo ukuchonga isibane ngasinye ukunceda kulo naluphi na utshintsho ukufakela kamva. Umfanekiso wesi-7
NOTE: To ensure weather-resistant protection, installthe provided plugs in any unused port. Plugs can be separated by cutting the connector between plugs with a knife or scissors.
Qhoboshela naziphi na izibophelelo zentambo eziyimfuneko kwaye uphinde ufake isitulo.

NOTE: If installing a trailer adapter or other lighting accessory, the wires shown can be used for the following functions. Please use suitable customer-supplied wiring connectors to complete this installation. Please note this output supports up to 10 AMP max, and it is the customer’s responsibility to use it appropriately