SC T HS04-4K6G HDMI Switcher Bukana ea Mosebelisi

SC T HS04-4K6G HDMI Switcher

Tlhahisoleseding ya Sehlahiswa

Phanele View

IR Remote Control Setting
Sesebelisoa sena se ka laoloa ka ho sebelisa remote control ea IR. Pele o sebelisa IR remote control kapa o fetola libeteri, nomoro ea ID e tlameha ho hlophisoa. Ho seta nomoro ea ID ea IR, tobetsa o hatelle konopo ea Letšoao la Matla ebe o tobetsa nomoro 0.

Letšoao la LED

• Matla: ON/OFF
• SEKONYELA KHAOLO: TLHOKOMELISO E BONAHALA/ TSOA
• TSAMAI TS'OA 1, 2, 3, 4: ON/OFF ON/OFF ON FLASH

Mosebetsi oa konopo ea Panel

• Matla: Sisteme e kenya tshebetsong/ standby
• SEKONYELA KHAOLO: Ts'ebetso ea ho hlahloba ka boits'oaro e kentsoe / e holofalitsoe
• HO THOLA KA HO ETSA HORE NA: Mosebetsi oa ho qhoma o otlolohileng o butsoitse/o holofetse
• FIHLELANG: Tokiso ea khanya ea LED
• 1, 2, 3, 4: Hajoale khetha mocha oa lets'oao la ho kenya 'me u tima ts'ebetso ea auto-scan

Remote Control Operating A, B Mode Switching
Ho na le mekhoa e 'meli ea ts'ebetso ea remoutu: A le B. Ho chencha lipakeng tsa mefuta, tobetsa konopo ea matla le "remote control" * ha sesebelisoa se buletsoe. Mokhoa oa kamehla oa feme ke Mode A.

IR Remote Control Mode A Opereishene

• Letšoao la matla: Sisteme ea ho kenya tšebetsong/ standby
• 1, 2, 3, 4 (567) 0 # MENU ENTER (567) 89: Mesebetsi e fapaneng e kenyelletsang ho khetha lintho tse kenang, ho kenya ts'ebetso ea auto scan, ho tima ts'ebetso ea auto-scan, ho lokisa khanya ea LED, joalo-joalo.

IR Remote Control Mode B Oa sebetsa

• Letšoao la matla: Sisteme ea ho kenya tšebetsong/ standby
• 1, 2, 3, 4 (567) # MENU ENTER (567) 890: Mesebetsi e fapaneng e kenyelletsang ho khetha lintho tse kenang, ho kenya ts'ebetso, tsamaiso ea ho thibela, ho lokisa khanya ea LED, joalo-joalo.

Mosebetsi oa Auto Scan
Mosebetsi oa ho hlahloba ka boits'oaro o fetohela ho kenyo e latelang e fumanehang ha mongolo o khethiloeng o sa khone ho hlaha. Ts'ebetso ena e kengoa tšebetsong ka mor'a metsotsoana e 30 ea ho se kenye letsoho ha lets'oao.

LBH

P: Nka theha nomoro ea ID e hole ea IR joang
A: Ho seta nomoro ea remoutu ea ID ea IR, tobetsa o hatelle konopo ea Letšoao la Matla ebe o tobetsa nomoro 0.
P: Nka fetola joang pakeng tsa mekhoa ea ho sebetsa ea Mode A le ea B
A: Tobetsa konopo ea matla a phanele le konopo ea remote control * hammoho ha sesebelisoa se buletsoe.

Selelekela

HS04-4K6G ke 4-input HDMI automatic switcher e tšehetsang qeto e phahameng ho fihla ho 4K@60Hz 4:4:4. Ntle le moo, ts'ebetso ea auto-scan e lumella switcher hore e fetohele mohloling o fumanehang kapa oa ho qetela o hokahaneng oa HDMI ka bohona.
Ke tharollo e phethahetseng bakeng sa libaesekopo tsa lapeng, likamore tsa ts'ireletso, joalo-joalo - ha ho sa na mathata ka li-plug-ins bakeng sa lisebelisoa tse ngata tsa HDMI.
Likaroloana

• Qeto e fihlang ho 4K@60hz 4:4:4.
• E hahiloeng ka har'a RS232 console port bakeng sa taolo e hole kapa ntlafatso ea firmware.
• E ts'ehetsa ts'ebetso ea ho skena ka boits'oaro, e fetolela ka bo eona ho kenyelletso e fumanehang ha e khethiloeng e sa khone ho hlahisa (metsotsoana e 30).
• E ts'ehetsa ts'ebetso ea ho fetoha ha otho, e fetohela mohloling oa ho qetela o hokahaneng oa ho kenya.
• E laoloa ka li-buttons tse ka pele, IR remote, le RS232.

Phanele View  HS04-4K6G

IR Remote Control Setting
Sesebediswa sena se ka sebedisa remote control ya IR bakeng sa ho seta le ho laola tshebetso, Nomoro ya ID e tlameha ho setwa pele o sebedisa remote control kapa ho fetola dibetri tse ntjha.
Kenya nomoro ea hau ea ID ea IR
Tobetsa 'me u tšoare konopo ea "Power Symbol" ebe o tobetsa nomoro

Ho kenya View
HS04-4K6G

Letšoao la LED 

• Matla ON/OFF Sistimi kenya tshebetsong/ standby. Konopo ea FLASH Panel kapa IR remote control e koetsoe ke PC e hole.
• SEKONYELA KHAOLO ON/OFF Auto Scan mosebetsi o kentsoeng/o holofetse.
• TSAMAI TS'OA ON/OFF Auto jump function butle/e holofetse.
• 1, 2, 3, 4 ON FLASH Ha ho tlhahiso ea lets'oao

Mosebetsi oa konopo ea Panel

• Matla Sisteme activate/ Boemo ba ho ema.
• SEKONYELA KHAOLO Ts'ebetso ea ho hlahloba ka boits'oaro e butsoitse/e holotsoe.
• TSAMAI TS'OA Auto jump function e butswe/e holofetse.
• FIHLELANG Tokiso ea khanya ea LED.
• 1, 2, 3, 4 Hajoale, khetha mocha oa lets'oao la ho kenya 'me u tima ts'ebetso ea auto scan.

Remote Control Operating A, B Mode Switching
Ho na le mekhoa e 'meli ea ho sebetsa ka remote control: Ha sesebelisoa sena se buletsoe, u ka fetola mokhoa oa A, le oa B ka ho tobetsa konopo ea "power" le "*" remote control hammoho.
Mokhoa oa ho sebetsa oa Mode A: E tla le auto scan & auto jump function. konopo bakeng sa ts'ebetso e potlakileng ho switch ea AV. Tlhophiso ea feme e setetsoe ho (Mokhoa A). Mokhoa oa ho sebetsa oa Mokhoa oa B: Ha ho hlahlojoa ka boits'oaro le ho tlola mesebetsi ha ho hlokahale hore e sebelisoe, e hlokang feela motho a le mong

IR remote control Mode A Operating 

Letšoao la matla Sisteme ea ho kenya tšebetsong/ standby.
▲ Khetha ntho e latelang e fumanehang 'me u kenye tšebetso ea auto scan.
▼ Khetha kenyelletso e fetileng e fumanehang ebe o kenya tšebetsong ts'ebetso ea auto scan.
◀ Khetha se kentsoeng nakong e fetileng ebe o tima ts'ebetso ea auto scan.
▶ Khetha ho kenya letsoho ho latelang ebe o tima ts'ebetso ea auto scan.
1 , 2 , 3 , 4 (5 6 7) Hajoale khetha ho kenya 'me u tima ts'ebetso ea auto scan.
0 Auto jump fu nction e butswe/e holofetse.
# Phetoho ea khanya ea LED.
MENU 、 ENTER 、＊、 (5 6 7) 、 8 、 9 Reserved (ha ho mosebetsi).

IR remote control Mode B Operating 

Letšoao la matla Sisteme ea ho kenya tšebetsong/ standby.
▲ Khetha ntho e latelang ebe sistimi e kenya tšebetsong.
▼ Khetha tse kentsoeng le sistimi e fetileng.
◀ Khetha se kentsoeng pele 'me sisteme e sebetse.
▶ Khetha ntho e latelang 'me u kenye sistimi.
1 , 2 , 3 , 4 (5 6 7) Hajoale khetha ho kenya 'me tsamaiso e sebetse.
# Phetoho ea khanya ea LED.
MENU 、 ENTER 、＊、 (5 6 7) 、 8 、 9 、 0 E bolokiloe (ha ho mosebetsi).

Mosebetsi oa Auto Scan
Tlas'a ts'ebetso ea auto scan, haeba lets'oao le khethiloeng la video le nyamela ka nako ea metsotsoana e 0.5, le tla ikhethela se kentsoeng pele kapa se latelang ka lets'oao la video.
Mosebetsi oa Auto Jump
Tlas'a ts'ebetso ea "auto jump", haeba ho na le lets'oao le lecha la video, e tla fetohela ho kenyelletso e ncha ea lets'oao la video.
Leseli la khanya ea LED
Khanya ea LED e ka hlophisoa joalo ka mekhahlelo e 4 e latelang

1. Bonyane Khanya
2. Khanya e Tloaelehileng
3. Boholo Khanya
4. Ho fetoha ha koloi ho khanya

Feme ea kamehla e behiloe ho boemo ba 3.
Tlas'a Brightness auto change mode, tobetsa konopo efe kapa efe kapa IR remote control, kapa lets'oao la video le fetotsoe (lets'oao la video le nyamela kapa le hlahe), boemo ba LED bo tla bonts'a khanya e phahameng ho isa ho metsotsoana e 5 ebe o khutlela ho khanya e tlase.
Mosebetsi oa Remote Control oa Computer
Seteishene sena sa RS-232 se ka hokahanngoa le komporo, ho sebelisa lenaneo la terminal bakeng sa ts'ebetso ea taolo e hole, sebopeho sa puisano ke 9600, 8, N, 1 (9600 Bps, 1 start bits, 8 data bits, 1 stop bit). Tlas'a ts'ebetso ea taolo e hole, Haeba e bonts'a 「COMMAND」, joale e "tlas'a taelo ea taelo". E ne e ka sebetsoa habonolo le ho hlophisoa ka ho kenya litaelo tse latelang chateng. Tobetsa「Enter」: haeba e bontša 「OK!」 joale taelo e fetileng e phethetsoe; e bonts'a 「ERROR!」 e bontša hore taelo e fetileng e fosahetse.
Taelo ea Mokhoa oa Taelo

[COMMAND] [DESCRIBE] n Hajoale, khetha ho kenya 'me u tima ho sekena ka boiketsetso.
PRE Kgetha se kentsweng se neng se le teng mme o kenye tshebetsong scan ya othomathike.
E LATELANG Khetha kenyeletso e latelang e fumanehang ebe o kenya tšebetsong scan ninemanga.
SCAN y Mosebetsi oa ho hlahloba ka boits'oaro o butsoitse/o holotsoe.
JUMP y Mosebetsi oa ho qhomela ka boiketsetso o butsoitse/o holofalitsoe.
SEBELISA Sisteme ea ho kenya tšebetsong.
STANDBY System standby.
MODE x Kgetha mokgwa wa tshebetso A/B.

IR y IR senotlolo sa konopo / notlolla.
KEY y Senotlolo sa konopo ea Panel / notlolla.
LED n LED phetoho khanya.
BOLOKA Boloka litlhophiso.
LOAD Setting ea mojaro.
KEYPAD tshebetso ya Keypad.
SIGNAL Bontša boemo ba lets'oao la ho kenya.
STATUS Pontšo ea maemo.
VERSION Hlahisa mofuta oa firmware.
? Hlahisa litaelo tsohle.

[SYMBOL] PARAMETER][
n 1 | 2 | 3 | 4
x A | B
y ON | TLOA

Litlhaku tsa sebaka pakeng tsa taelo le liparamente li ka hlokomolohuoa.

Virtual Remote Control Mode 

• E bonts'a 「KEYPAD:」 ha e le ka tlas'a mokhoa oa taolo ea hole, oo u ka kenyang litaelo tse latelang ho terminal ho etsisa ts'ebetso ea IR ea remote control.
• Ka mor'a ho tobetsa taelo, haeba e bontša 「OK!」 joale taelo e fetileng e ea phethisoa; e bonts'a 「ERROR!」 e bontša hore taelo e fetileng e fosahetse.

Sisteme Kenya Mokhoa oa Taolo ea Remote ea Virtual A/B Tlhaloso ea tšebetso

MOKHOA A:

[TAELO] [HLALOSA] 1 2 3 4 Hajoale, khetha ho kenya 'me u thibele scan ninete.
- Khetha lintho tse kentsoeng nakong e fetileng ebe o kenya tšebetsong scan ninemanga.
+ Khetha tlhahiso e latelang e fumanehang ebe o kenya tšebetsong scan ea othomathike.
L Khetha se kentsoeng pele 'me u thibele scan ninete.
R Khetha tlhahiso e latelang 'me u thibele scan ninemanga.
0 Ts'ebetso ea ho tlola ka boits'oaro e butsoitse/e holofetse.
/ Sistimi kenya tshebetsong/ standby.
. Khanya ea LED le tokafatso.
Q Ts'ebetso ea mokhoa oa taelo.
S Setting ya pontsho le boemo ba letshwao la ho kenya. ? Hlahisa litaelo tsohle.

 MOKHOA B

[TAELO] [HLALOSA] 1 2 3 4 Hajoale khetha i nput.
– Khetha kenyeletso e fetileng.
+ Khetha mokhoa o latelang.
L Khetha se kentsoeng pele.
R Khetha tlhahiso e latelang.
/ Sistimi kenya tshebetsong/ standby.
. Tokiso ea khanya ea LED.
Q Ts'ebetso ea mokhoa oa taelo.
S Setting ya pontsho le boemo ba letshwao la ho kenya.
? Hlahisa litaelo tsohle.

System Standby Virtual Remote Control Mode A/B Tlhaloso ea tšebetso

MOKHOA A

[TAELA] [HLALOSA] / Sisteme kenya tshebetsong/ standby.
Q Ts'ebetso ea mokhoa oa taelo.
S Setting ea ponts'o le boemo ba lets'oao la ho kenya.
? Hlahisa litaelo tsohle.

MOKHOA B 
[TAELA] [HLALOSA] 1 2 3 4 Hajoale, khetha ho kenya 'me u kenye sistimi.
– Khetha se kentsoeng pele 'me sisteme e sebetse.
+ Khetha ho kenya le ho kenya sistimi tshebetsong.
L Khetha se kentsoeng pele 'me sisteme e sebetse.
R Khetha ho kenya le ho kenya tšebetsong sistimi.
/ Sisteme kenya tshebetsong/ standby.
Q Ts'ebetso ea mokhoa oa taelo.
S Setting ea ponts'o le boemo ba lets'oao la ho kenya.
? Hlahisa litaelo tsohle.

Ela hloko
Ho na le lisebelisoa tse ling tsa DVD tse ntseng li e-na le + 5V pontšo e hlahisoang ka lebaka la ho tima ha motlakase, e tla etsa hore ho tlola hoa koloi le ts'ebetso ea auto scan e sa tloaeleha, ka kopo koala auto jump le auto scan function ho qoba ts'ebetso efe kapa efe e sa tloaelehang.

Sephutheloana Kenyelletsa
HS04-4K6G Switcher x 1 pcs IR remote control x 1 pcs Mounting Screw pack x 1 mekotla Adapter ea matla x 1 pcs

Tlhaloso

NTHO NO.	HS04-4K6G
Tšehetso
Ho latela melao	HDM 2.0, HDCP 1.4/ 2.2, 3D
Max. Qeto ea HDMI	4K@60Hz 4:4:4 12bits
Motlakase oa video	18 Gbps
RS232 Baud sekhahla	9600 bps
Tšehetso ea IR	38Khz , ±45°, 5M
Maemakepe & Litšebelisano
Kenyeletso ea Video	4 x HDMI Mofuta oa A
Sephetho sa Video	1 x HDMI Mofuta oa A
RS232 Interface (Console)	1 x DB9 Mosadi
Matla
Phepelo ea motlakase	DC 5V 1A
Tšebeliso ea Matla	370mA
Ambient Mocheso
Tshebetso	0 ho isa ho 55 ℃
Polokelo	-20 ho isa ho 85 ℃
Mongobo	Ho fihla ho 95%
Litšobotsi Tsa 'Mele
Litekanyo	253 x 143 x 40mm
Boima ba 'mele	800g

Litokomane / Lisebelisoa

SC T HS04-4K6G HDMI Switcher [pdf] Buka ea Mosebelisi HS04-4K6G HDMI Switcher, HS04-4K6G, HDMI Switcher, Switcher

Litšupiso

• Bukana ea Mosebelisi