VEVOR 2024DB Stair Climbing Cart
INTRODUCTION
We continue to be committed to provide you tools with at competitive prices. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to the major top brands and does not necessarily mean covering all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually Saving Half in comparison with the top major brands.
MODEL:2024DB
NEED HELP? CONTACT US!
Have product questions? Need technical support? Please feel free to contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again if there are any technology or software updates on our product.
SAFETY INSTRUCTIONS
WARNING:
- Please do not put it near flammable materials.
- It is forbidden to carry people under any condition.
- Please pay attention to safety when going up and down stairs.
- Overload is strictly prohibited.
- Don’t move too fast when passing pothole areas.
MODEL AND PARAMETERS
| Model | 2024DB |
| Maximum Load(Flat Ground) | 88lbs |
| Maximum Load(Climb Stairs) | 60lbs |
| Color | Silver |
| Material | Steel+EVA+PP |
STRUCTURE DIAGRAM AND COMPONENTS
- Handle
- Hoop
- Climbing Wheel
- Universal Wheel
COMPONENTS
ASSEMBLY
Assemble the front wheels:
Step 1: Push the front wheel E into the front leg. When pushing in, please align the angle of the connecting part so that the hex head screw on the axis of front wheel E can be accurately pushed into the front leg.
Step 2: Put the small washer H and Washer G on the short shaft of the front wheel E in turn, and then put the screw F in.
Step 3: Finally, tighten the screw F with wrench C.
Assemble the rear wheels:
Step 1: Unfold shopping cart frame A to expose the back leg of cart. Slide long axle D through hole in each back leg.
Step 2: Place both sides of the back wheel into spring B and washer H. Insert parts D directly into the center of the wheel. Make sure it is fixed and cannot be pulled out. Completing the installation.
How to remove the wheel: Locate the black button in the center of the outside of the wheel and press it inward to separate the wheel from the iron pipe.
MAINTENANCE
- Avoid prolonged exposure to the sun to avoid aging.
- Please fold the cart when it is not used for a long time.
- Avoid children taking the stair climbing cart to play.
Manufacturer: Shanghaimuxinmuyeyouxiangongsi
Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN.
EC REP: E-CrossStu GmbH.
Mainzer Landstr.69, 60329 Frankfurt am Main.
UK REP: YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX
Imported to AUS: SIHAO PTY LTD.
1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.
Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
Technical Support and E-Warranty Certificate www.vevor.com/support
STAIR CLIMBING CART
MODEL: 2024DB
Documents / Resources
| VEVOR 2024DB Stair Climbing Cart [pdf] Instruction Manual 2024DB, 2024DB Stair Climbing Cart, 2024DB, Stair Climbing Cart, Climbing Cart, Cart |