VOLT G3 Solar Path Light
Specifications
- Item: VSPL-1045-ABK-R2
- Product Dimensions: 8.68″ x 4.55″ x 7.57″
Product Usage Instructions
Remove Battery Compartment Cover
Using a screwdriver, remove the battery compartment cover from the fixture body.
Install Battery
Insert the battery into the battery compartment.
Reinstall Battery Compartment Cover
Place the battery compartment cover back onto the fixture body and secure with the previously removed screws.
Cover Solar Panels
Cover solar panels completely using black materials. The fixture will light up when the solar panel is covered and turn back off when it is uncovered.
Thread Riser Onto Fixture
Thread the riser onto the fixture and hand tighten until snug.
Install Stake
- Determine the desired location for mounting the stake mount. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammering.
- If the ground is hard and the stake is difficult to install, make a crosscut in the ground using a flat shovel.
- Thread the riser onto the stake and hand tighten until snug.
FAQ
- Q: What should I do if the fixture is not turning on?
- A: Make sure that the solar panels are receiving plenty of sunlight and that the built-in photocells are not affected by ambient lighting at night.
- Q: Can I use this fixture in any weather conditions?
- A: This fixture is designed for outdoor use, but it’s recommended to refer to the product specifications for specific weather resistance information.
INSTALLATION INSTRUCTIONS
VOLT® Solar Path Light – VSPL-1045-ABK-R2
IMPORTANT: PLEASE READ BEFORE INSTALLATION
- This luminaire is intended for installation in accordance with local codes and the National Electric Code (NEC). Failure to adhere to these codes and instructions may result in serious injury, property damage and void the warranty.
- These instructions do not intend to cover all variations in installation, operation maintenance or mounting situations.
- Please note that these solar fixtures are equipped with built-in photocells, so they will not turn on until it is dark enough. These fixtures will also require plenty of sunlight to function properly. It’s best to have the fixture in an area where the sun will get to it at all times throughout the day and where no ambient lighting will affect the photocell at night.
IMPORTANT SAFETY INSTRUCTIONS
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS LIGHTED LAMP IS HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
- Lamp gets HOT quickly!
- Do not touch the hot lens, guard or enclosure.
- Keep lamp away from materials that may burn.
- Do not touch lamp at any time. Use a soft cloth. Oil from skin may damage lamp.
- Do not operate the luminaire fitting with a missing or damaged shield.
SAVE THESE INSTRUCTIONS
PACKAGE CONTENTS
- (1) Fixture Body
- (1) Battery
PARTS REQUIRED (SOLD
- (1) Mounting Accessory
- (1) Riser
PRODUCT DIMENSIONS
REMOVE BATTERY COMPARTMENT COVER
Using a screwdriver, remove the battery compartment cover from the fixture body.
INSTALL BATTERY
Insert the battery into the battery Compartment.
REINSTALL BATTERY COMPARTMENT COVER
- Place the battery compartment cover back onto the fixture body and secure with the previously removed screws.
- Cover solar panels completely by using black materials. The fixture will light up when the solar panel is covered and turn back off when it is uncovered.
- Now you can proceed to next steps of installations knowing the fixture is functional.
- Thread the riser onto the fixture and hand tighten until snug.
INSTALL STAKE
Determine the desired location for mounting the stake mount. Hammer the stake into the ground until flange of stake is flush to grade. To avoid damage to the stake, place a board on top of the stake while hammering.
Note: If the ground is hard and the stake is difficult to install, make a crosscut in the ground using a flat shovel.
Thread the riser on to the stake and hand tighten until snug.
- 1-813-978-3700
- Mon-Fri 8am-8pm
- Sat-Sun 10am – 6pm (EST)
Specifications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549
- All rights reserved
- customersupport@voltlighting.com
- www.voltlighting.com
- 813.978.3700
Documents / Resources
| VOLT G3 Solar Path Light [pdf] Installation Guide VSPL-1045-ABK-R2, G3 Solar Path Light, G3, Solar Path Light, Path Light, Light |