TECNO CAMON 30S Pro Smartphone User Manual

You can charge your phone with a charger or by connecting it to a computer using a USB cable (comes with the phone). Use only TECNO chargers and cables. Other chargers or cables may\ damage the phone and invalidate its warranty.

FCC Caution:

Labelling requirements: This device complies \with Part 15 of the FCC Rules. Operation is subject to the\ following two conditions: (1) This device may not cause harmful\ interference. (2) This device must accept any interference received, including interference that may cause undesired operation.

Information to user: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.

Specific Absorption Rate (SAR) information:

This mobile phone meets the government’s requirements for exposure to radio waves. The guidelines are based on.

Trademark Information:

HiOS runs on Android™ OS. Android is a trademark of Google LLC.

FAQ

Q: Can I use any charger to charge my TECNO CAMON 30S Pro?
- A: No, it is recommended to use only TECNO chargers and cables to avoid damaging the phone and invalidating its warranty.

Q: What is the SAR information for this phone?
- A: The Specific Absorption Rate (SAR) information indicates that this mobile phone meets the government’s requirements for exposure to radio waves.

Exploded diagram specification

1	TP SP FILM	2	TP+LCM
3	MIDFRAME	4	FRONT CAM 50M
5	FCAM HOLDER	6	GRAPHITE PLATES
7	RECEIVER	8	SIM HOLDER
9	MAIN BOARD	10	BACK CAM 2M
11	BACK CAM AI	12	AI CAM FPC
13	BACK CAM 50M	14	SIDEKEY FPC
15	MAIN PCB HEAT	16	SIDEKEY STEEL
17	VOL SIDEKEY	18	POWER SIDEKEY
19	SIDEKEY FRAME	20	FCAM COPPER
21	MAIN CAM COPPER	22	CAM BTB STEEL
23	UP FRAME	24	PLASTIC DECO
25	BATTERY COVER	26	COMPOSITE BOARD DECO
27	UP FRAME HEAT FILM	28	USB RUBBER
29	FINGER PRINT	30	SUB BOARD
31	ANT BOARD	32	MAIN FPC
33	SCREW	34	COAXIAL CABLE
35	MOTOR	36	LCM RUBBER
37	SPK FRAME	38	WIRELESS CHARGING COIL
39	METAL DECO A	40	GLASS LENS
41	METAL DECO B	42	UP FRAME HEAT FILM

Know your phone

Front camera
Volume + button
Volume – button
Power button
NFC

SIM card installation

Power off your phone.
Refer to the following picture for SIM card installation.

Charging the phone

You can charge your phone with a charger or by connecting it to a computer using a USB cable (comes with the phone). Use only TECNO chargers and cables. Other chargers or cables may damage the phone and invalidate its warranty.

FCC Statement

FCC Caution Labelling requirements.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference.
This device must accept any interference received, including interference that may cause undesired operation.

Information to user.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device.

Information to the user.

Note: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and may radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception (able to be determined by turning the device off and on), the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the device and receiver.
Connect the device to an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Specific Absorption Rate (SAR) information:

This mobile phone meets the government’s requirements for exposure to radio waves. The guidelines are based on standards developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: CLA6 (FCC ID: 2ADYY-CLA6) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.78 W/kg and when properly worn on the body is 0.35 W/kg.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.0 cm must be maintained between the user’s body and the handset, including the antenna. Third-party belt clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or approved antenna.

Dolby, Dolby Atmos, and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Manufactured under license from Dolby Laboratories. Confidential unpublished works. Copyright © 2012-2023 Dolby Laboratories. All rights reserved.

HiOS runs on AndroidTM OS. Android is a trademark of Google LLC

Documents / Resources

TECNO CAMON 30S Pro Smartphone [pdf] User Manual
CAMON 30S Pro, CAMON 30S Pro Smartphone, Smartphone

References

User Manual

TECNO CAMON 30S Pro Smartphone User Manual

TECNO CAMON 30S Pro Smartphone

Product Usage Instructions

FAQ