Nothing Special   »   [go: up one dir, main page]

ergotron logo ergotron 98-663-629 Signature Pad HolderSignature Pad Holder
Horizontal T-Slot Mount

98-663-629 Signature Pad Holder

ergotron 98-663-629 Signature Pad Holder - overviewergotron 98-663-629 Signature Pad Holder - symbol TOOLS Needed
ergotron 98-663-629 Signature Pad Holder - toolsergotron 98-663-629 Signature Pad Holder - assembly 1T-Slot must be mounted before attaching accessories
ergotron 98-663-629 Signature Pad Holder - assembly 2

Adjustment Step

ergotron 98-663-629 Signature Pad Holder - assembly 3 Adjust your mounting solution to handle the added weight.
Adjustments should move smoothly and easily through the full range of motion and stay where you set it If adjustments are difficult and do not stay in the desired position, follow the instructions to loosen or tighten the tension to create a smooth, easy adjustment motion. Depending on your product and the adjustment, it may take several turns to notice a difference.

Safety

Warning icon Caution: Leave enough slack in cable to allow full range of motion.
To avoid the potential to pinch cables it is important to follow the cable routing instructions in this manual. Failure to follow these instructions may result in equipment damage or personal injury.
Product Weight
ergotron 98-663-629 Signature Pad Holder - assembly 4Weight Capactyergotron 98-663-629 Signature Pad Holder - assembly 5Warning icon CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!

For the latest User Installation Guide please visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
For Senvice visit: www.ergotron.com
Forlocal customer care phone numbers visit: hitp://contact.ergotron.com
NOTE: When contacting customer sevice, reference the serial number.ergotron 98-663-629 Signature Pad Holder - assembly 6While Ergotron, Inc. makes every effort to provide accurate and complete information on the installation and use of its products, it will not be held liable for any editorial ertors or omissions (including those made in the process of translation from English to another language), or for incidental, special or consequential damages of any nature resuting from furnishing this instruction and performance of equipment in connection with this instruction. Ergotron, Inc.reserves the right to make changes i the product design and/or product documentation without notification o its users. For the most current product information, or to know if this document is available in languages other than those herein, please contact Ergotron. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying,recording or otherwise without the prior written consent of Ergotron, Inc, 1181 Trapp Road, Eagan, Minnesota, 55121, USA Patents Pending and Patented U.S. & Foreign. Ergotronis a registered trademark of Ergotron, Inc.

ergotron logoWww.ergotron.com
USA: 1-800-888-8458
Europe: +31 (0)33-4545600
China: 400-120-3051
Japan: japansupport@ergotron.com
© 2024 Ergotron, Inc. All rights reserved.
888-98-249-W-00 rev. A + 07/24

Documents / Resources

ergotron 98-663-629 Signature Pad Holder [pdf] Instruction Manual
98-663-629, 98-663-629 Signature Pad Holder, 98-663-629, Signature Pad Holder, Pad Holder, Holder

References

Leave a comment

Your email address will not be published. Required fields are marked *