FLUKE 325 Clamp ຄູ່ມືຜູ້ໃຊ້ແມັດ

ເນື້ອໃນ ເຊື່ອງ

1 FLUKE 325 Clamp ແມັດ

2 ຄໍາແນະນໍາການນໍາໃຊ້ຜະລິດຕະພັນ

3 Clamp Meter selection chart

4 Clamp meter specifications

5 ເອກະສານ / ຊັບພະຍາກອນ

5.1 ເອກະສານອ້າງອີງ

6 ກະທູ້ທີ່ກ່ຽວຂ້ອງ

FLUKE 325 Clamp ແມັດ

ຂໍ້ມູນຈໍາເພາະ

Brand: Fluke

Models: 381, 355, 773, 365, 373, 374, 375, 376, 381 Remote
Display, 325, T5-1000, 360, 1630, 773

ຄໍາແນະນໍາການນໍາໃຊ້ຜະລິດຕະພັນ

Fluke Clamp ແມັດ
Fluke offers a range of Clamp Meters designed to meet various needs across different industries and job functions. These meters provide accurate measurements for troubleshooting and maintenance tasks.

ຄໍາຮ້ອງສະຫມັກທີ່ແນະນໍາ

365 True-rms AC Clamp ແມັດ: Ideal for residential electricians, electrical contractors, and commercial electricians for troubleshooting general AC current systems.

373 True-rms AC Clamp ແມັດ: Suitable for basic troubleshooting of AC and DC panels by electric utility technicians and facility maintenance personnel.
374 True-rms AC/DC Clamp ແມັດ: Enables flexible current probes for expanded measurement range up to 2500 A AC, recommended for industrial electrical contractors and plant maintenance professionals.

ຄຳຖາມທີ່ຖາມເລື້ອຍໆ (FAQ)

Q: Where can I find more information about the product range?
A: For detailed product specifications and features, visit Valuetesters.com ຫຼືຕິດຕໍ່ info@valuetesters.com.

Q: What is the recommended clamp meter for advanced troubleshooting in industrial settings?
A: ໄດ້ 376 True-rms AC/DC Clamp Meter with iFlexTM is a fully-featured model designed for industrial electricians and maintenance professionals conducting advanced troubleshooting of AC and DC systems.

Q: Which clamp meter is suitable for testing 4-20 mA signals and loop testing?
A: ໄດ້ 773 ລ້ານamp ຂະບວນການ Clamp ແມັດ is recommended for process technicians, electricians, and automation specialists requiring precise testing of signals and loop functionality.

Fluke Clamp ແມັດ
Solutions for every need

Clamp Meter selection chart

	Job functions	ຄໍາຮ້ອງສະຫມັກ	ແນະນໍາ clamp
ຈຸດປະສົງທົ່ວໄປ	ການບໍາລຸງຮັກສາພືດ	Multiple placement potential for large facilities allows units to be left in place	365 True-rms AC Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ 200 A ac and A dc measurement with fixed jaw Detachable jaw makes accessing wires and viewing the display easier 6000 Ω resistance measurement with continuity Built in flashlight/torch allows for easy illumination and identification of wires True-rms to more accurately measure the actual current, even with distorted wave-forms caused by noisy loads CAT III 600 V
	Process Technician/ Electrician
	Automation Specialist
	Residential Electrician	Conduct front line troubleshooting of general ac current systems Verify circuit integrity and operation Measure load current, ac voltage and continuity of switches, fuses and contacts Feeder cables Check balance and loading of feeder cables	373 True-rms AC Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Measure up to 600 A ac Measure ac and dc voltage ເຖິງ 600 V True-rms to more accurately measure the actual current, even with distorted wave forms caused by noisy loads Includes large backlit display, ac and dc voltage, resistance, continuity, and capacitance CAT IV 300 V, CAT III 600 V
	ຜູ້ຮັບເໝົາໄຟຟ້າ
	Commercial Electrician
	ຜູ້ຮັບເໝົາໄຟຟ້າ	Basic troubleshooting of ac and dc ລະບົບ Measure dc current in battery powered devices, security systems, etc. Measure motor start-up and run current Capacitance for motor start and run capacitors Check balance and loading in service panels	374 True-rms AC/DC Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Measure up to 600 A ac and A dc True-rms to more accurately measure the actual current, even with distorted wave-forms caused by noisy loads Compatible with the new i2500-18 and i2500-10 iFlex flexible current probes (sold separately), which expands the measurement range to 2500 A ac and provides increased display flexibility Inrush current mode for repeatable measurement of motor or equipment start-up current Includes large backlit display, ac and dc voltage, resistance, continuity, MIN/MAX and capacitance CAT IV 600 V, CAT III 1000 V
	Commercial Electrician
	Electric Utility Technician
	Facility Maintenance
	Utility Technician
	Industrial Electrical Contractor	Advanced troubleshooting of ac and dc ລະບົບ Large motors and drives, and noisy electrical environments Motor inrush to troubleshoot current protection devices Output of variable speed motors and drives	375 True-rms AC/DC Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ 500 mV measurement range to interface with other accessories Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings Frequency measurement to 500 Hz with both jaw and iFlex Compatible with the new i2500-18 and i2500-10 iFlex flexible current probes (sold separately), which expands the measurement range to 2500 A ac and provides increased display flexibility Measure true-rms voltage, capacitance, resistance and continuity CAT IV 600 V, CAT III 1000 V
	ການບໍາລຸງຮັກສາພືດ
	HVAC/R Specialist

	Job functions	ຄໍາຮ້ອງສະຫມັກ	ແນະນໍາ clamp
ໄຟຟ້າອຸດສາຫະກຳ	Industrial Electrician	Fully featured model for electrical and industrial professionals who need to conduct advanced troubleshooting of ac and dc systems in any environment Measure 1000 A ac or dc with fixed jaw to measure current in motors, vaults and bus bars 2500 A ac capability with iFlex flexible current probe; fits around tight and awkward conductors Clamp around bus bars or conductors in service panels to measure loads and line frequency in circuits	376 True-rms AC/DC Clamp ແມັດ with iFlex™ ລັກສະນະທີ່ສໍາຄັນ Measure up to 1000 A ac and A dc Inputs for 1000 V ac and V dc, 60 kΩ resistance and continuity Includes the new i2500-18 and i2500-10 iFlex flexible current probes, which expands the measurement range to 2500 A ac and provides increased display flexibility Narrow, elongated jaw with large opening easily singles out the conductor of interest True-rms to more accurately measure the actual current, even with distorted wave-forms caused by noisy loads CAT IV 600 V, CAT III 1000 V
	ການບໍາລຸງຮັກສາພືດ
	Facility Maintenance
	Industrial Electrician	Fully featured model for electrical and industrial professionals who need to conduct advanced troubleshooting of ac and dc systems in any environment Measure 1000 A ac or dc with fixed jaw to measure current in motors, vaults and bus bars 2500 A ac capability with iFlex flexible current probe; fits around tight and awkward conductors Clamp around bus bars or conductors in service panels to measure loads and line frequency in circuits	381 Remote Display True-rms AC/DC Clamp Meter with iFlex™ ລັກສະນະທີ່ສໍາຄັນ Wireless technology allows remote display to be carried up to 30 ft away from point of measurement Removable magnetic display can be conveniently mounted where it is easily seen Includes the new i2500-18 and i2500-10 iFlex flexible current probes, which expands the measurement range to 2500 A ac and provides increased display flexibility AC and dc current, ac and dc voltage, resistance, frequency, continuity, capacitance, min/max and inrush low pass filter Large, easy to read backlight display automatically sets the correct measurement range CAT IV 600 V, CAT III 1000 V
	Industrial Service Electrician
	ການບໍາລຸງຮັກສາພືດ
	Facility Maintenance
ອຸປະກອນເສີມ	Commercial/Industrial Electrician	Industrial troubleshooting in low current ac and dc applications where access is difficult Access to tight wiring in locations such as PLC cabinets	iFlex™ i2500 Flexible Current Probes ລັກສະນະທີ່ສໍາຄັນ Measure up to 2500 A ac current with select Fluke clamp ແມັດ Provides increased display flexibility and ability to measure awkward sized conductors Works with frequency, inrush and min/max functions 7.5 mm coil diameter allows measurement in tight spaces Available in 10-inch and 18-inch lengths CAT IV 600 V, CAT III 1000 V
	Facility/Plant Maintenance
	HVAC/R Specialist
Resi/Comm Electrical	Commercial Electrical ຜູ້ຮັບເໝົາ	Verify circuit integrity and operation Measure load current, ac voltage and continuity of switches, fuses and contacts Feeder Cables Check balance and loading of feeder cables	325 True-rms Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Measure up to 400 A ac and dc 0.01 A resolution in the 40 A range for more precise measurements Compact form factor to make measurements easily in tight cable compartments Measure ac and dc voltage ເຖິງ 600 V Resistance, continuity, temperature, capacitance and display hold functions CAT IV 300 V, CAT III 600 V
	Industrial Electrical Contractor
	ການບໍາລຸງຮັກສາພືດ

	Job functions	ຄໍາຮ້ອງສະຫມັກ	ແນະນໍາ clamp
Comm/Ind Electrical	ຜູ້ຮັບເໝົາໄຟຟ້າ	Working on panels and branch circuits Measure loads on a branch circuit at a panel (including feeder cables, branch circuits and neutrals) and the continuity of switches, fuses and contacts Measure load side voltage of a breaker or fuse Check if a circuit is live before beginning work	T5-1000 Electrical Tester ລັກສະນະທີ່ສໍາຄັນ Open jaw ac current measurement to 100 A AC and dc voltage T5-600: CAT III 600 V T5-1000: CAT IV 600 V, CAT III 1000 V Continuity, resistance Rugged and easy to use
	Facility Maintenance
	Commercial Electrician
ຮົ່ວ	Facility Maintenance Electrician	Measuring leakage current Check insulation condition and leakage of circuits and systems Check for leakage in circuits and systems utilizing filters Testing insulation on live circuits • Evaluate insulation condition on live circuits via leakage current measurements where disconnection is highly inconvenient	360 AC Leakage Current Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Measurement of leakage current with 3 mA range and 1 µA of resolution for accurate monitoring of insulation erosion Broad range of measurement from 1 µA up to 60 A, for all installation needs Advanced shielding to ensure accurate results when measuring near other conductors Easy-to-carry, pocket-sized leakage current tester with wide 40 mm (1.5 in) jaw size CAT III 300 V
	Hospital Electrician
	ຜູ້ຮັບເໝົາໄຟຟ້າ
ແຜ່ນດິນໂລກ	Industrial/Commercial Maintenance Electrician	Grounding and bonding resistance testing Perform ground loop tests in areas where other ground resistance test techniques are not available Test parts of a multi-grounded system Periodically perform quick tests on system grounds as part of a regular preventative maintenance program	1630 Earth Ground Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Measure from 0.025 Ù to 1500 Ù ground loop resistance Large jaw for clamping around the widest range of ground conductors or grounding bars Measure ground leakage and ac load currents from 0.2 mA all the way up to 30 A User defined alarm limits for rapid pass/fail type measurements CAT III 300 V
	Utility Technician
	Electrical Contractor/ Consultant
ຂະບວນການ	Process Technician/ Electrician	Measuring process control signals Measures 4-20 mA signals without break- ing the loop Check correct operation of PLCs and control systems analog I/O Source process control signals allow for testing of 4-20 mA signals and 1 to 5 V and 0 to 10 V to test automation I/O Advanced troubleshooting features simplify loop testing	773 ລ້ານamp ຂະບວນການ Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Saves time and money by easily measuring 4-20 mA signals Detatchable miniature clamp for tight locations Also measure older 10 to 50 mA signal systems with the 100 mA range Backlit display, spotlight, display hold and zero-reading buttons Eliminates the need for extra 4-20 mA source or voltage equipment when troubleshooting CAT II 300V
	Automation Specialist/ Commercial Electrician

	Job functions	ຄໍາຮ້ອງສະຫມັກ	ແນະນໍາ clamp
ຄຸນນະພາບພະລັງງານ	Electrical and Field Service Technician	Measuring non-linear loads Setup and troubleshoot variable frequency drives and UPS systems—Verify correct operation by measuring key power quality parametersHarmonic measurements Uncover harmonic issues that can damage or disrupt critical equipmentTroubleshooting start-up current issues Check start-up current where spurious resets or nuisance circuit breaker tripping occurs Load studies Verify electrical system capacity before adding loads	345 Power Quality Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ AC/DC current: Clamp-on measurement of current up to 1400 A ac rms and 2000 A dc CAT IV 600 V rated for use at the service entrance Accurate in noisy environments: Using low-pass filter, the clamp meter performs even with distorted waveforms Data logging: Identify intermittent faults by logging any power quality parameter for minutes, or over a month Troubleshoot harmonics: Analyze and log harmonics digitally or graphically Inrush current: Capture and analyze nuisance tripping, from 3 seconds to 300 seconds CAT IV 600 V, CAT III 1000 V
	HVAC/R Technician
	ວິສະວະກອນໄຟຟ້າ
	Commercial Electrician
	Facility Maintenance Electrician
	Electric Utility Engineer
High-End Industrial Utility	Industrial Service Electrician	Service panel, service entrance and low voltage vaults In the service panel, clamp around each individual phase. Good for large single or parallel conductors In the service entrance, clamp around busbars, up to 2.5 in, to verify expected current usage Measure current in conductors of low- voltage vaults (1000 V or less) Working with large loads Verify operation of large load service panels, switchgears, large current DC systems and motors	355 True-rms 2000 A Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Up to 2000 A dc, 1400 A ac current measurement Large jaw suitable for single or multiple large conductors CAT IV 600 V rated for maximum application versatility Inputs for 600 V ac, 1000 V dc, 400 KÙ resistance and continuity Low pass filter, min/max/avg and inrush current Accurately measure frequency of current and voltage up to 1 kHz CAT IV 600 V, CAT III 1000 V
	ຜູ້ຮັບເໝົາໄຟຟ້າ
	Electric Utility Technician
	Marine or Welding Electrician
	Facility Maintenance Electrician
HVAC/R	HVAC/R Service Technician	Checking boilers and furnaces Capture flue gas temperatures and perform flame rod testingHVAC motors and drives Measure start and run motor capacitors Troubleshoot compressor electrical motor faults Measure performance of variable frequency drives Testing electrical performance Measure load-side and supply-side current and voltage Measure current and voltage phase balance on 3 phase systems	902 True-rms HVAC Clamp ແມັດ ລັກສະນະທີ່ສໍາຄັນ Measure current up to 600 A ac and up to 200 µA dc Measure true-rms voltage, capacitance, resistance and continuity Measure contact temperature with included Type-K temperature probe. (Or measure the outside temperature of a pipe with the 80PK-8 Pipe Clamp Temperature Probe, sold separately) CAT III 600 V

Genuine Fluke Accessories
When your job depends on every tool in your toolbox, Genuine Fluke Accessories keep you working.

Clamp meter specifications

	Commercial/industrial electrical		Residential/commercial electrical			ຈຸດປະສົງທົ່ວໄປ

ການວັດແທກ
AC ປັດຈຸບັນ	•	•	•	•	•	•
AC voltage	•	•	•	•	•	•
ການຕໍ່ຕ້ານ	•	•	•	•	•	•
ຄວາມຕໍ່ເນື່ອງ	•	•	•	•	•	•
DC volts	•	•	•	•	•	•
ກະແສໄຟຟ້າ DC					•	•
True-rms			•	•	•	•
ຄວາມຖີ່					•
AC + DC voltage			•	•	•
AC + DC current					•
ຕ່ຳສຸດ/ສູງສຸດ/ສະເລ່ຍ					•
4-20 mA (0.01 mA resolution)
ອຸນຫະພູມ				•	•
ຄວາມຈຸ				•	•
Earth ground loop resistance
ລັກສະນະພິເສດ
Inrush current mode
ຕົວກອງ Low Pass
Harmonics, power, data logging
18-inch iFlex Flexible Current Probe
10-inch iFlex Flexible Current Probe
ຈໍສະແດງຜົນທາງໄກ
Flashlight/torch						•
ຈໍສະແດງຜົນ
ຈໍສະແດງຜົນຄ້າງໄວ້	•	•	•	•	•	•
ແສງຫຼັງ				•	•	•
Graphing display
ຂໍ້ມູນຈໍາເພາະ
ການເປີດຄາງກະໄຕ	12.9 ມມ (0.5 ນິ້ວ)	12.9 ມມ (0.5 ນິ້ວ)	30 ມມ (1.18 ນິ້ວ)	30 ມມ (1.18 ນິ້ວ)	30 ມມ (1.18 ນິ້ວ)	18 ມມ (0.7 ນິ້ວ)
Max wire size	1/0 THHN Cable	1/0 THHN Cable	600 MCM	600 MCM	600 MCM	17 ມມ (0.67 ນິ້ວ)
Current range ac rms	0 ເຖິງ 100.0 A	0 ເຖິງ 100.0 A	0 ເຖິງ 400.0 A	0 to 40.00 A/ 400.0 ກ	0 to 40.00 A/ 400.0 ກ	0 ເຖິງ 200.0 A
Accuracy ac current (50/60 Hz)	3 % ± 3 counts	3 % ± 3 counts	2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts
ການຕອບສະ ໜອງ ຂອງ AC	ສະເລ່ຍ	ສະເລ່ຍ	True-rms	True-rms	True-rms	True-rms
Current range dc					0 to 40.00 A/400.0 A	0 ເຖິງ 200 A
Accuracy dc current					2 % ± 5 counts	2 % ± 5 counts
ສະບັບtage range ac	0 ຫາ 600.0 V	0 ຫາ 1000 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V
Accuracy ac voltage	1.5 % ± 2 counts	1.5 % ± 2 counts	1.5 % ± 5 counts	1.5 % ± 5 counts	1.5 % ± 5 counts	2 % ± 5 counts
ສະບັບtage range dc	0 ຫາ 600.0 V	0 ຫາ 1000 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V
Accuracy dc voltage	1 % ± 1 count	1 % ± 1 count	1.0 % ± 5 counts	1.0 % ± 5 counts	1.0 % ± 5 counts	2 % ± 5 counts
ຊ່ວງຄວາມຕ້ານທານ	0 ຫາ 1000	0 ຫາ 1000	0 ຫາ 4000Ω	0 ຫາ 4000	0 ເຖິງ 40 kΩ	0 ຫາ 6000
ຂອບເຂດການວັດແທກຄວາມຖີ່					5 Hz ຫາ 500 Hz
ພະລັງງານຫນ່ວຍ
ປິດອັດຕະໂນມັດ	•	•	•	•	•
Warranty and safety
ຮັບປະກັນ (ປີ)	2	2	2	2	2	3
Category ratings (EN61010-1)	CAT III 600 V	CAT IV 600 V, CAT III 1000 V	CAT IV 300 V, CAT III 600 V	CAT IV 300 V, CAT III 600 V	CAT IV 300 V, CAT III 600 V	CAT III 600 V

ຈຸດປະສົງທົ່ວໄປ			Industrial electrical		HVAC/R	High end industrial, utility		iFlex accessory


•	•	•	•	•	•	•	•	•
•	•	•	•	•	•		•
•	•	•	•	•	•		•
•	•	•	•	•	•		•
•	•	•	•	•	•		•
	•	•	•	•	•	•	•
•	•	•	•	•	•	•	•	•
		•	•	•		•	•	•
							•
						•	•
	•	•	•	•	•	•	•	•

					•
•	•	•	•	•	•


	•	•	•	•		•	•	•
		•	•	•		•	•

	ທາງເລືອກ	ທາງເລືອກ	ລວມ	ລວມ
	ທາງເລືອກ	ທາງເລືອກ	ທາງເລືອກ	ທາງເລືອກ
				•


•	•	•	•	•	•	•	•
•	•	•	•	•	•	•	•


32 ມມ (1.26 ນິ້ວ)	34 ມມ (1.33 ນິ້ວ)	34 ມມ (1.33 ນິ້ວ)	34 ມມ (1.33 ນິ້ວ)	34 ມມ (1.33 ນິ້ວ)	30.5 ມມ (1.2 ນິ້ວ)	58 ມມ (2.3 ນິ້ວ)	58 ມມ (2.3 ນິ້ວ)	7.5 mm coil
750 MCM	750 MCM	750 MCM	750 MCM	750 MCM	750 MCM	750 MCM or three 500 MCM	750 MCM or three 500 MCM
0 ເຖິງ 600.0 A	0 ເຖິງ 600.0 A	0 ເຖິງ 600.0 A	0 ເຖິງ 999.9 A	0 ເຖິງ 999.9 A	0 ເຖິງ 600.0 A	0 ເຖິງ 1400 A	0 ເຖິງ 1400 A	0 ເຖິງ 2500 A
2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts	1.5 % ± 5 counts	1.5 % ± 5 counts	3 % ± 5 counts
True-rms	True-rms	True-rms	True-rms	True-rms	True-rms	True-rms	True-rms	True-rms
	0 ເຖິງ 600.0 A	0 ເຖິງ 600.0 A	0 ເຖິງ 999.9 A	0 ເຖິງ 999.9 A	0 to 200 µA	0 ເຖິງ 2000 A	0 ເຖິງ 2000 A
	2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts	2 % ± 5 counts	1 % ± 5 counts	1.5 % ± 5 counts	1.5 % ± 5 counts
0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 1000 V	0 ຫາ 1000 V	600.0 ວ		0 ຫາ 600.0 V
1 % ± 5 counts	1.5 % ± 5 counts	1.5 % ± 5 counts	1.5 % ± 5 counts	1.5 % ± 5 counts	1 % ± 5 counts		1 % ± 5 counts
0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 600.0 V	0 ຫາ 1000 V	0 ຫາ 1000 V	0 ຫາ 600.0 V		0 ຫາ 1000 V
1 % ± 5 counts	1 % ± 5 counts	1 % ± 5 counts	1 % ± 5 counts	1 % ± 5 counts	1 % ± 5 counts		1 % ± 5 counts
0 ຫາ 6000Ω	0 ຫາ 6000	0 ຫາ 6000	0 ເຖິງ 60 kΩ	0 ເຖິງ 60 kΩ	0 ຫາ 9999Ω		0 to 400 KΩ
		500 Hz	500 Hz	500 Hz		5 ຫາ 1000 Hz	5 ຫາ 1000 Hz	500 Hz

•	•	•	•	•	•	•	•

3	3	3	3	3	3	3	3	3
CAT III 600V, CAT IV 300V	CAT III 1000V, CAT IV 600V	CAT III 1000V, CAT IV 600V	CAT III 1000V, CAT IV 600V	CAT III 1000V, CAT IV 600V	CAT III 600 V	CAT III 1000V, CAT IV 600V	CAT III 1000V, CAT IV 600V	CAT III 1000V, CAT IV 600V

	ຮົ່ວ	ຂະບວນການ	ແຜ່ນດິນໂລກ	ຄຸນນະພາບພະລັງງານ

ການວັດແທກ
AC ປັດຈຸບັນ	•		•	•
AC volts				•
ການຕໍ່ຕ້ານ
ຄວາມຕໍ່ເນື່ອງ			•
ຊິງຕັນດີຊີ				•
ກະແສໄຟຟ້າ DC		•		•
True-rms			•	•
ຄວາມຖີ່				•
ຕ່ຳສຸດ/ສູງສຸດ/ສະເລ່ຍ				•
4-20 mA (0.01 mA resolution)		•
ອຸນຫະພູມ
ຄວາມຈຸ
Earth ground loop resistance			•
ລັກສະນະພິເສດ
Inrush current mode				•
ຕົວກອງ Low Pass				•
Harmonics, power, data logging				•
18-inch iFlex Flexible Current Probe
10-inch iFlex Flexible Current Probe
ຈໍສະແດງຜົນທາງໄກ
Flashlight/torch
ຈໍສະແດງຜົນ
ຈໍສະແດງຜົນຄ້າງໄວ້	•	•	•	•
ແສງຫຼັງ	•	•		•
Graphing display				•
ຂໍ້ມູນຈໍາເພາະ
ການເປີດຄາງກະໄຕ	40 ມມ (1.5 ນິ້ວ)	4.5 ມມ (0.177 ນິ້ວ)	35 ມມ (1.38 ນິ້ວ)	58 ມມ (2.3 ນິ້ວ)
Max wire size	1250 MCM	6 AWG	1000 MCM	750 MCM or three 500 MCM
Current range ac rms	0 ເຖິງ 60 A		0 ເຖິງ 35 A	0 ເຖິງ 1400 A
Accuracy ac current (50/60 Hz)	1 % ± 5 counts		2 % ± 3 counts	± 3 % ± 5 counts
ການຕອບສະ ໜອງ ຂອງ AC	ສະເລ່ຍ		True-rms	True-rms
Current range dc		0 ຫາ 99.9 mA		0 ເຖິງ 2000 A
Accuracy dc current		4-20 mA is 0.2 % ± 5 counts		± 1.5 % ± 5 counts
ສະບັບtage range ac				0 ຫາ 825 V
Accuracy ac voltage				± 1 % ± 5 counts
ສະບັບtage range dc				0 ຫາ 825 V
Accuracy dc voltage				± 1 % ± 5 counts
ຊ່ວງຄວາມຕ້ານທານ			0 ຫາ 1500
ຂອບເຂດການວັດແທກຄວາມຖີ່				15 ຫາ 1000 Hz
ພະລັງງານຫນ່ວຍ
ປິດອັດຕະໂນມັດ	•	•	•	•
Warranty and safety
ຮັບປະກັນ (ປີ)	1	3	1	2
Category ratings (EN61010-1)	CAT III 300 V	Cat II 300 V	CAT III 300 V	CAT IV 600 V, CAT III 1000 V

Education/Support

ABCs of Clamp Meters What is a clamp ແມັດ
and what can it do? What measurements can be made with a clamp meter? How do you get the most out of a clamp meter? Which clamp meter is best suited to the environment the meter will be used in? Find the answers to these questions and more in our Clamp Meter ABCs application note.

mA Loop Webນົກດູ
Learn how to test and troubleshoot 4 mA to 20 mA control loops with this Fluke webinar. Visit the link below to register and participate.

Machine Health Newsletter
Simple as a screw driver and useful as a pair of work boots: that’s our goal for Machine Health. We want to make your job easier, and help you keep the machines you care for up, running and delivering value. Visit the link below to find ideas and information on troubleshooting techniques and preventative solutions.

Motors and Drives Solution Center
Subscribe to this bi-monthly newsletter and learn about machine health—how to anticipate and identify problems and how to troubleshoot them.

ເອກະສານ / ຊັບພະຍາກອນ

FLUKE 325 Clamp ແມັດ [pdf] ຄູ່ມືຜູ້ໃຊ້
325, 365, 373, 374, 375, 376, 381, T5-1000, 360, 1630, 325 Clamp Meters, 325, Clamp ແມັດ, ແມັດ

ເອກະສານອ້າງອີງ

ຄູ່ມືຜູ້ໃຊ້