JBC PDS-B Portable Display 7 Inch
Specifications
- Model: PDS-B
- Display Size: 7 inches
- Connectivity: USB-A to USB-C cable
- Power Source: Power Socket
Frequently Asked Questions
Q: How many tools can be connected at once?
A: It is possible to connect up to two tools at the same time. Follow the instructions to connect multiple tools simultaneously.
Q: How does the workscreen graph update?
A: The graphs of temperature and power start automatically as soon as the tool is lifted from the charging base.
This manual corresponds to the following references: PDS-B
Packing List
The following items are included:
This manual corresponds to the following references: PDS-B
Features and Connections
PDS is designed to work with JBC’s battery-powered B·IRON station range.
Station Setup
- Display Holder Assembling
Insert the thin end of the display holder into the upper area of the rear rail of the charging base (1). Then carefully rotate the display holder 90 degrees (2) until it stands vertical. - Display Holder Setting
Insert the fi xing knob (1) and tighten it just enough so that it stays in place but the display holder can be moved. - Base and Display Connection
SetupConnect the charging base to the mains (1).The display can be connected to the USB port (2) with the provided USB cable to keep it charging while working. - Display Placing
Place the display on the support with its buttons facing upwards (1). Adjust the height of the display holder tighten the fixing knob.
DisplayTurn on the display by holding down the power button for a while (1) and then open the B·IRON app*:
Note: The app can also be downloaded to your own devices. To know how, see section “Installing and Updating the B·IRON App”.
Tool Connection
activated make sure that the charging base is connected to the mains. Note: The supplied tool is already connected.Scanning another tool: (This process can take a while)Place the tool in the charging holder to activate it. The status light band color indicates the charge level (see table below). If the scanning process does not run automatically, tap “scan” (6) on the display while the tool remains in the charging holder. When the tool is shown in the device list on the display, select it (11) and tap “connect” (7). Now the tool is ready for soldering.
Tool search function:
When in doubt of which tool corresponds to the tool’s name, use the tool search function. Tap on the magnifying glass symbol (8) next to the tool’s name. The light band on the corresponding tool blinks in blue for five seconds to identify it.
Working with two tools (works also for charging bases with only one charging holder):It is possible to connect up to two tools at the same time. If a tool is already connected, first disconnect it from the device by selecting “Menu” (9) and tapping on “Disconnect”.Place the second tool in the charging holder and scan it (6). The second tool is also shown in the device list on the display (10). To work with two tools, select one from the left-hand column (11) and the other one from the right-hand column (10). Then tap on “connect” (7).
Work screen
The work screen shows a graph of the tip temperature and power supplied to the tip updated in real-time. It allows modifying the tool working temperature, checking the battery status and turning the tool in use on and off.
Graph and Automatic Data Display
The graphs of temperature and supplied power start automatically as soon as the tool is lifted from the charging base.
The graph display can be paused while working by tapping the screen on the graph area. While the automatic display is on hold, the temperature/power values can be checked at a certain point of the graph by tapping on the desired position on the display screen.
Note: Pausing the automatic display by tapping on the screen does not stop the tool from heating up, and the tip will remain at the selected working temperature. The graph display automatically continues after 5 seconds.
The graph can be moved to the left and right by swiping the touch screen sideways with one finger.
Working Temperature Modifi cation
The working temperature can be modifi ed using the slider below the graph (± 5 °C / ± 10 °F).
Stopping Data Display
When the tool is placed in the charging holder or when it enters Hibernation Mode, the data display stops.
The display starts again automatically when the tool is lifted from the tool holder and the graph is automatically displayed again at the point where the previous display stopped, leaving a small gap on the graph between the last registered value and the new starting point.
Working with Two Tools
- When working with two tools, to switch between the two graphs, tap on the tool selector (upper-right corner of the display) and select the desired tool from the drop-down menu.
- It is also possible to alternate both graphs by simply lifting one tool or the other from the tool holder.
- The display will automatically show the graph and information of the tool in use.
Note: All menu items are explained in detail starting at section “Menu”.
Tool Connected:
Once at least one tool has been linked, the menu expands and shows more options.
No Tool Connected:
Before any tool is connected to the station or after the last tool has been disconnected, the menu offers these options.
Work:
Takes the user to the workscreen (see section “Workscreen”).
Settings:
The B·IRON app offers an intuitive user interface, which provides quick access to several station parameters.
Counters:
The Counters section allows the user to consult data and counts on charges, work state periods, Sleep Mode periods, errors… The data can be consulted either by time periods or by number of times a certain event has occurred.
Update:
Allows updating the firmware of the soldering station. To know more about the updating process, see section “Updating the Firmware”
Locate Tool:
When in doubt of which tool corresponds to the tool’s name, use the tool search function, tapping on “Locate Tool”. The light band on the corresponding tool blinks in blue for fi ve seconds to identify it.
Documents:
User manuals related to the station or to the tools can be consulted in this section or on JBC’s website: www.joctools.com
Light/Dark Theme:
Allows the user to switch between dark and light display modes.
Disconnect:
Disconnect the tool in use. If only one tool is connected, after disconnecting it, the app returns to the device list display.
Settings
JBC Software
- The app is already installed on JBC’s B·IRON Display. If another display is to be used, the app must be downloaded to the corresponding display (see chapters below).
- At the moment of purchasing the B·IRON tool, the current firmware is already downloaded to the tool.
- Note: Since the tool firmware is not updated automatically, updates must be carried out by the customer.
Note: Since the tool firmware is not updated automatically, updates must be carried out by the customer.
To do so, follow the instructions on www.jbctools.com/software.html
App Versions
If an app with version 1.6 or higher is already installed on the display (tablet or smartphone) used with B-IRON, the firmware of the tool can be updated directly without updating the app. Carry out the steps described in section “B-IRON Tool Firmware Update”.
Older app versions must be updated. If no app has been installed, it must be installed first.
App Installation
On JBC’s portable display (Android), the B·IRON app is already installed.
On the user’s smartphone or tablet (Android / iOS), go to the App Store/Play Store and search for “JBC B.IRON” on the search bar. Note: Internet connection is required to download the app.
Alternatively, scan these QR codes to access the B·IRON app page directly:
App Update
- Display with Internet connection (Android / iOS)
- Update the app via Google Play (Android) or the App Store (iOS).
- Display without Internet connection (Android)
- Download JBC’s installer program to another device with an Internet connection from
- JBC’s website: https://www.jbctools.com/jbcsoftware.html
- Then copy the downloaded program to the internal storage of the display used with B·IRON. Access the internal storage of the display and run the downloaded program. Once the program is completed, the app will be updated to its newest version.
- Note: For JBC´s displays, swipe down to open the internal storage folder.
Maintenance
- Charge the display under the following conditions:
- Before the first use ensure the display is completly charged.
- The battery power ICON indicates “no power”.
- The display automatically shuts off.
- Operation buttons no response.
- During ongoing upload and download, when the display is in file transfer mode, do not disconnect the display. This could cause application error.
- USB connection is used only for data transfer.
- The display can be cleaned with a damp cloth. Do not use alcohol, thinner or benzene to clean it.
- Maintenance must not be carried out by children unless supervised.
- Repairs should only be performed by a JBC-authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent malfunction or accidents.
- Do not expose the portable display to high temperatures, humidity or dust. Avoid direct sunlight.
- Do not drop the portable display, as it may cause damage or malfunction.
- Do not use the portable display in places where wireless communications are restricted.
- Do not disassemble the display.
- The display is not waterproof.
- Keep your workplace clean and tidy. Wear appropriate protection when working to avoid personal harm.
- This appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate supervision or instruction concerning the use of the appliance and understand the hazards involved. Children must not play with the appliance.
Specifications
Warranty
- JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labor.
- Warranty does not cover product wear or misuse.
- In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
- Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase.
- If you register, you will receive e-mail notifications about new software updates for your registered product.
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility.
Documents / Resources
 | JBC PDS-B Portable Display 7 Inch [pdf] Instruction Manual PDS-B Portable Display 7 Inch, PDS-B, Portable Display 7 Inch, Display 7 Inch, 7 Inch, Inch |
References
Soldering and Rework equipment for electronics | JBC Soldering
- User Manual
Soldering and Rework equipment for electronics | JBC Soldering