GIANT HL1200 Recon Plus ìhè ihu
Nkọwapụta ngwaahịa
- Model: Recon plus HL 1200
- Oke Lumens: 1200
- Atụmatụ: njikwa anya, Sistemụ Nleba anya ntụpọ
- Material: CNC casing
- Connectivity: USB C Cable
Ntuziaka ojiji ngwaahịa
Ike na njikwa ọnọdụ
To turn on the light in Full Power mode, use the Power/Mode switch. Press and hold for 7 seconds to activate the power lock/unlock function, preventing accidental switching on in confined spaces.
Ndozi osisi
The light offers multiple beam cutoff options including High, Mid, Low, and Flash modes. Use the Cutoff beam switch to toggle between these modes and adjust the beam according to your needs. The High beam can be turned on or off separately.
Pairing with Remote Control
- Activate the car lights and simultaneously press both buttons on the remote control for 5 seconds to initiate pairing mode.
- Successful pairing is indicated by the blue light flashing on the remote followed by the green light turning on for 3 seconds before turning off.
- Ensure no other lights from the same RECON PLUS series are nearby during initial pairing.
Ịdọ aka ná ntị/ịkpachara anya
- Ìhè a na-ebunye ọkụ ọkụ dị ike nke ukwuu na ọkụ ihu ụgbọ ala ka o wee bute ọnọdụ dị ize ndụ dabere n'akụkụ nkuku ejiri.
- Jide n'aka na ị ga-eduzi ọkụ ọkụ na ala ka onye ọkwọ ụgbọ ala na-abịaru nso ghara ịma jijiji.
- Ejila ọnọdụ dị elu n'okporo ụzọ ọha.
- Tupu njem gị, biko gbaa mbọ hụ na ọkụ akwụsiri ike n'ihe nkwado a, ọ na-amụnye ọkụ, ọkụ anaghị ebunye ọkụ, wdg.
- Elela anya na ọkụ mgbe ọ na-enwu. Ma ọ bụghị ya, ọ nwere ike imebi anya gị.
- Etinyela ya n’ebe ụmụaka aka.
- Na nkwadebe maka nkwụsị batrị na-atụghị anya ya, anyị na-akwado ka ị buru ọkụ mapụtara.
- Ngwaahịa a na-eguzogide mmiri n'okpuru iji ya eme ihe kwa ụbọchị ma nwee ike iji ya na mmiri ozuzo. Agbanyeghị, akpacharala anya mikpuo ya n'ime mmiri.
- Ọ bụrụ na akụkụ ọkụ ma ọ bụ akụkụ ahụ aghọọ unyi na apịtị, wdg, jiri akwa dị nro mee ka ọ dị nro dị ọcha. Adịla mgbe ị na-etinye agba dị nro, benzine ma ọ bụ mmanya; mmebi ga-ebute.
- A na-ebufe nkeji a na obere ụgwọ iji lelee ọkụ. Jide n'aka na ị ga-akwụ ụgwọ ya tupu eji ya, dịka ntuziaka "Otú E Si Ịchacha".
Kedu ihe dị na igbe ahụ
Sistemụ Nleba anya ntụpọ kpuru ìsì
Ịkwado RECON + TL300 R ka ọ rụọ ọrụ
Ịgbanwe ỤDỌRỤ Ọkụ
Otu esi agba cha cha
Na-ana ngwaahịa ahụ mgbe niile tupu ejiri ya.
Otu esi etinye
- Turn on the car lights. Press both buttons on the remote control simultaneously for 5 seconds to initiate pairing mode.
- The pairing is successful when the remote control ‘slue light flashes, followed by the green light turning on for 3 seconds before turning off.
- During the initial pairing, ensure there are no nearby lights from the same RECON PLUS series.
Otu esi agbago okpu agha/kọmputa n'Ugwu Mgbakwunye
Ihe nkedo na / ma ọ bụ isi mkpịsị aka, dabere na ugwu ị na-eji.
Nkwupụta FCC
- Ike nnyefe: <4dBm
- Aha ngwaahịa: Ìhè igwe kwụ otu ebe
- Aha nlereanya: Recon gbakwunyere HL 1200
- NJ FCC: ZL7-RECONHL1200
Ngwaọrụ a na-akwado akụkụ 15 nke Iwu FCC. A na-arụ ọrụ n'okpuru ọnọdụ abụọ a:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya na-emerụ ahụ, yana
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla enwetara, gụnyere nnyonye anya nwere ike ibute ọrụ na-achọghị.
Mgbanwe ma ọ bụ mgbanwe ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.
This device complies with FCC radiation exposure limits set forth for an uncontrolled environment, In order to avoid the possibility of exceeding the FCC radio frequency
exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation,
Mara: A nwalere ngwa a wee hụ na ọ dabara na oke maka ngwaọrụ dijitalụ klaasị B, dabere na akụkụ 15 nke iwu FCC. Emebere oke ndị a iji nye nchebe ezi uche dị na ya megide nnyonye anya na-emerụ emerụ na ntinye ụlọ. Akụrụngwa a na-ewepụta, na-eji ma nwee ike ịgbasa ike ugboro redio yana, ọ bụrụ na etinyeghị ya ma jiri ya dịka ntuziaka ahụ siri dị, nwere ike ibute ndabichi na-emerụ ahụ na nkwukọrịta redio. Agbanyeghị, enweghị nkwa na nnyonye anya agaghị eme n'otu nrụnye. Ọ bụrụ na akụrụngwa a na-ebute nnyonye anya na-emerụ ahụ na nnabata redio ma ọ bụ telivishọn, nke enwere ike ikpebi site na ịgbanyụ ma gbanye akụrụngwa, a na-agba onye ọrụ ume ka ọ nwaa idozi nnyonye anya site na otu ma ọ bụ karịa n'ime usoro ndị a:
- Megharịa ma ọ bụ bugharịa antenna nnata
- Mee ka nkewa dị n'etiti akụrụngwa na nnata
- Jikọọ akụrụngwa n'ime oghere na sekit dị iche na nke ejikọrọ onye nnata
- Kpọtụrụ onye na-ere ahịa ma ọ bụ onye ọrụ redio/TV nwere ahụmahụ maka enyemaka.
PMN/ Product name: Ìhè igwe kwụ otu ebe
Aha nlereanya: Recon gbakwunyere HL 1200
IC: 23735-RECONHL1200
HVIN: RECON PLUS HL1200
Nwere ike ice-3
This device comply with Industry Canada’s licence exempt RSS(s). Operation is subject to the following two conditions:
- Ngwaọrụ a nwere ike ọ gaghị ebute nnyonye anya.
- Ngwaọrụ a ga-anabatarịrị nnyonye anya ọ bụla, gụnyere nnyonye anya nwere ike bute ịrụ ọrụ ngwaọrụ a na-achọghị.
Mgbanwe ma ọ bụ mgbanwe ndị otu na-ahụ maka nnabata na-akwadoghị nke ọma nwere ike imebi ikike onye ọrụ iji rụọ ngwa ahụ.
Ngwaọrụ a na-akwado oke ikpughe radieshon nke edobere maka gburugburu ebe anaghị achịkwa ya. Iji zere ohere nke ịgafe oke mkpughe ugboro redio, ịdị nso mmadụ na antenna agaghị erughị 20cm (inch asatọ) n'oge arụ ọrụ nkịtị.
- RED Declaration of Conformity (DOC)
- Unique identification of this DoC: ,
- Anyị,
- Giant Manufacturing CO., Ltd.
kwuputa n'okpuru ọrụ anyị na ngwaahịa a:
- ngwaahịa aha: Ìhè igwe kwụ otu ebe
- aha ahia: GIANT
- ụdị ma ọ bụ ihe nlereanya: Recon plus HL 12m
ozi mgbakwunye dị mkpa:
(e.g, lot, batch or serial number, sources and numbers of items) to which this declaration relates is in conformity with the essential requirements and other relevant requirements of the RED Directive (2014/53/EIJ).
The product is in conformity with the following standards and/or other Normangee documents:
- HEALTH & SAFETY (Art, EN 60598-2-8:2013, EN 60598-1:2015, EN 62493:2015, EN62479:2010
- EMC (Art. Draft EN 301 489-1 Draft EN 301489-17 v3.2.o:2017; EN EN 61547:2009
- SPECTRUM (Art. 3(2)): EN 300 328 (title and/or number and date of issue of the standard(s) or other normative document(s))
- OTHER (incl. Art. 3(3) and voluntary specs): .. (title and/or number and date of issue of the standard(s) or other normative document(s))
Limitation of validity (if any): .
- Ozi mgbakwunye:
- Òtù mara ọkwa gụnyere: N/A
- Nka na ụzụ file held by: Giant Manufacturing CO., Ltd.
Ajụjụ A na-ajụkarị (FAQ)
- Q: How do I know if the pairing with the remote control is successful?
- A: The blue light on the remote will flash, followed by the green light turning on for 3 seconds before turning off.
- Q: How can I prevent accidental activation of the light?
- A: Press and hold the Power/Mode switch for 7 seconds to activate the power lock/unlock function.
Akwụkwọ / akụrụngwa
| GIANT GIANT HL1200 Recon Plus Front Light [pdf] Akwụkwọ ntuziaka GIANT HL1200, GIANT HL1200 Recon Plus Front Light, Recon Plus Front Light, Front Light, Light |
