Nothing Special   »   [go: up one dir, main page]

Caisley Logo -STEP BY STEP-
How to properly install EID cattle ear tags

Caisley 609800 EID Pepeiao Pipi Tags#609800
Caisley Ear Tag
Mea noi

609800 EID Pepeiao Pipi Tags

Caisley 609800 EID Pepeiao Pipi Tags - FIGUREE

Caisley USDA (840) EID Cattle Ear Tags
The male and female tags come slightly connected (see above).
You will need to tear the tags kaawale.

KANAWAI 1
Press the black clamp and slide the female part of the tag under the metal spring finger. The printed side of the female tag will be against the jaw of the applicator.

Caisley 609800 EID Pepeiao Pipi Tags - black clamp

KANAWAI 2
Slide the male tag over the metal pin. Be sure to push it all the way onto the pin! The printed side of the male tag will be against the other jaw of the applicator.

Caisley 609800 EID Pepeiao Pipi Tags - male tag

KANAWAI 3
Ensure the male pin aligns with the female opening and both tags are fully seated. (Don’t squeeze the applicator yet.)

Caisley 609800 EID Pepeiao Pipi Tags - male pin aligns

KANAWAI 4
Place the ear between the jaws of the applicator. While gripping the ear, squeeze the handles together until the male tag is inserted through the ear and into the female tag.

Caisley 609800 EID Pepeiao Pipi Tags - applicator

Placement is critical to success!
Ke hiki, tag when the ear is dry and clean. Avoid the large veins in the ear. Tissue around damaged veins heals slowly—so it’s prone to infection.
Designs that allow air near the wound to heal more quickly. For best results, apply an antibiotic, a fly repellent and/ or disinfectant to the ear tissue or tag.

Caisley 609800 EID Pepeiao Pipi Tags - veins

Ke hookomo nei tags in cold weather

Palaki tags (all brands) are much easier to install if they are warm. Why? As the temperature drops below freezing plastic becomes less flexible (more stiff) and forcing the male point of a tag through the female takes many more lbs. of pressure (because the female must expand).
So if you care about your hands it’s a good idea to keep the tags above freezing in very cold weather. It takes very little to do this.
How to keep your tags warm: Simply store them while tagging in a small bucket, cardboard box or tool box with a lid alongside a sealed pop bottle full of warm water. The warm water will keep both the air and the tags warmer in the container.

www.premier1supplies.com
800-282-6631
©Copyright 2025, Premier1Supplies.
Ua mālama ʻia nā kuleana āpau

Palapala / Punawai

Caisley 609800 EID Pepeiao Pipi Tags [pdf] Palapala a ka mea nona
609800, 609800 EID Cattle Ear Tags, 609800, EID Cattle Ear Tags, Pepeiao Tags, Tags

Nā kuhikuhi

Waiho i kahi manaʻo

ʻAʻole e paʻi ʻia kāu leka uila. Hōʻailona ʻia nā kahua i makemake ʻia *