dji D-RTK 3 Destûra Bikarhêner Stasyona Pirfunctional

Contents veşartin

1 dji D-RTK 3 Multifunctional Station

2 Bikaranîna vê Manual

dji D-RTK 3 Multifunctional Station

Pro Profile

Serview
The Multifunction Station User Manual provides detailed instructions on operating the product efficiently.

Lîsteya Hilbera Piştgiriyê
Check the compatibility of your products at this link.

Powering On
To activate the product’s internal battery:

Charge the product using a PD3.0 USB charger with a voltage between 9 to 15 V, like the DJI 65W Portable Charger.
Connect the charger to the USB-C port on D-RTK 3.

Damezirandin

Pêdiviyên Jîngehê
Ensure the product is used in a suitable environment as outlined in the manual.

Notices
Read all notices and warnings provided before proceeding with setup.
Gavên Setup
Follow the step-by-step setup guide in the manual for a seamless installation process.

Bikaranîna

Notices
Review all notices to ensure safe and effective product usage.

Bişkojka Hêzê
Learn how to operate the power button for turning the product on and off.

Indicators

Nîşana Asta Pîlê
Mode Indicator

GNSS Signal Indicator
Others

Modes Operating
Understand the different modes available for optimal performance.

Exporting and Processing Data
Learn how to export and process data efficiently using the product.

Lênerrînî

Firmware Update Notices
Follow instructions for updating firmware using DJI Pilot or DJI Assistant 2.

Exporting the Log Using DJI Assistant 2
Learn how to export logs using DJI Assistant 2 for analysis and troubleshooting.
Storage, Veguhestin, û Maintenance
Tips on storing, transporting, and maintaining the product for longevity.

Veguheztina Beşê
If parts need replacement, follow the guidelines provided in the manual.

FAQ

Q: How do I charge the internal battery for the first use?
A: Connect a PD3.0 USB charger (9-15 V) to the USB-C port on D-RTK 3.

Bikaranîna vê Manual

Çîrok

Giring
Nîşan û Serişteyên

Balkêşî

Berî Bikaranînê bixwînin

Pêşî hemî vîdyoyên dersê temaşe bikin, dûv re belgeyên ku di pakêtê de û vê manuala bikarhênerê de hene bixwînin.
If you have any questions or issues during installation and use of this product, contact the official support or an authorized dealer.

Video Tutorials
Visit the link or scan the QR code below to watch the tutorial videos, which demonstrate how to use the product safely:

https://enterprise.dji.com/d-rtk-3/video

Download DJI Enterprise App
Ji bo dakêşana guhertoya herî dawî koda QR-ê bişopînin.

To check the operating system versions supported by the app, visit https://www.dji.com/downloads/djiapp/dji-enterprise.
The interface and functions of the app may vary as the software version is updated. Actual user experience is based on the software version used.

Alîkarê DJI 2 dakêşin
Download DJI ASSISTANT™ 2 (Enterprise Series) at: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice

Pro Profile

Serview

Bişkojka Hêzê
Indicator Power
Mode Indicator
GNSS Signal Indicator
Porta Reservedkirî [1]

Porta USB-C [1]
5/8"-11 Çûna Mijara UNC
Antên Orientation OcuSync

Dema ku nayê bikar anîn, pê ewle bine ku lîmanan veşêrin da ku hilberê ji şil û tozê biparêzin.
When using the DJI Assistant 2, make sure to use a USB-C to USB-A cable to connect the USB-C port of the device to a USB-A port of the computer.

Lîsteya Hilbera Piştgiriyê
Serdana lînka jêrîn bikin view berhemên lihevhatî: https://enterprise.dji.com/d-rtk-3/specs

Powering On
Charge to activate the internal battery of the product before using for the first time. Make sure to use a PD3.0 USB charger with the voltage from 9 to 15 V, such as DJI 65W Portable Charger.

Connect the charger to the USB-C port on D-RTK 3. When the battery level indicator lights up, it means that the battery has been successfully activated. Make sure to charge until the indicator displays green before use.
Bikirtînin, û dûv re bişkoja hêzê bikirtînin û bihêlin da ku D-RTK 3 çalak/çalak bike.

When using a non-recommended charger, such as a charger with 5V-output, the product can be charged only after powering off.

Talîmatên Çalakkirinê
The product needs to be activated before using for the first time. The GNSS signal indicator blinks red when not activate

When used as a base station/relay station, the D-RTK 3 can be activated by following the prompts in DJI Pilot 2 when connecting to the aircraft and the remote controller. Make sure the remote controller is connected to the internet during activation.

When used as a rover station or DJI Pilot 2 does not prompt you to activate, download the latest version of DJI Assistant 2 (Enterprise Series). Connect the D-RTK 3 to the computer using a USB-C cable. Open DJI Assistant 2 and follow the instructions to activate the device.

Damezirandin

Pêdiviyên Jîngehê

The setup environment requires a wild field of vision. Make sure that there are no obstructions (trees, buildings) within the zone more than a 15° angel above the horizontal plane of the product antennas to prevent the GNSS signals from being absorbed or blocked.

Use the product in an open, radio interference free environment. Avoid using wireless devices that use the same frequency bands as the product.
The setup location should be at least 200 m away from high-power radio emission sources (such as television stations, microwave stations, etc.) and at least 50 m away from high voltage xetên veguheztinê ji bo ku ji midaxeleya elektromagnetîk a ji bo îşaretên GNSS dûr nekevin.
The setup location should be away from large area of water or object that strongly interfere with satellite signal reception to reduce multipath effects.

Notices

DO NOT bend excessively or fold the cable during installation.
During installation and placement, make sure the top side of the D-RTK 3 is relatively level with the horizontal surface.

DO NOT attempt to disassemble any part of the product that has already been mounted prior to shipping.

Gavên Setup

Base Station/Relay Station
Use the Survey Pole and Tripod kit (sold separately) to set up. Make sure to choose an open, unobstructed environment. Make sure the tripod is stable during use. (Figure A)
DO NOT change the position or angle of the tripod or the D-RTK 3 after the tripod has been leveled. Otherwise, it should be readjusted.

Rover Station
Simply use the survey pole. Download and install DJI Enterprise App. (Figure B)

Bikaranîna

Notices

Only use the product in the corresponding frequency band and in accordance with local laws and regulations.
DO NOT obstruct all the antennas of the product during use.
Only use genuine parts or officially authorized parts. Unauthorized parts may cause the system to malfunction and compromise safety.

Make sure there are no foreign matter such as water, oil, soil, or sand inside the product.
Handle the sharp ends of the survey pole and tripod with caution.
When using the survey pole and tripod for installation and elevation, be mindful of the surrounding environment to prevent toppling or electrical hazards.

When using the device in rainy or snowy weather, make sure to take necessary water-resistant measures. Use with caution and pay attention to lightning protection.
The product contains precision parts. Make sure to avoid collision to avoid damage to precision parts.
After transportation, the level bubble of the survey pole may be offset and can be re-leveled using the bottom screw.

Bişkojka Hêzê

Press, and then press and hold the power button to power on/off the product.
Press the power button 3 times to switch the operating modes.

When using the rover station, press and hold the power button for 5 seconds to enter the linking status.
When using the base station, press and hold the power button for 8 seconds to reset the password.

If the power button is pressed before the operation of powering on/off the product, the product may not be able to be powering on/off. At this time, please wait for at least 5 seconds. Then re-perform the power on/off operation.

Indicators

Nîşana Asta Pîlê

When the low battery occurs, the buzzer will emit continuous beeping.

During charging, the indicator will blink quickly when the charging power is sufficient, and blink slowly when it is insufficient.

Mode Indicator

Zehf li ser: Connected to both remote controller and aircraft.

Blinks: Unlinked or connected to one device only.

GNSS Signal Indicator

Blinks Slowly: Device inactivated.

Others

Operating Modes

Moda Stasyona Bingehê: Used to provide accurate data for centimeter-level positioning to improve operation precision for multiple compatible aircraft simultaneously.
Relay Moda Stasyonê: After connecting to one specified compatible aircraft and remote controller, installed at a high place and used as a communication relay to avoid signal blockage during operation.
Rover Station Mode: Used as a hand-held mapping device. Carry out control point /checkpoint measurements.

It is recommended to click the link below or scan the QR code to watch the tutorial video for usage information.

https://enterprise.dji.com/d-rtk-3/video

When installing and elevating the product, be mindful of the surrounding environment to prevent toppling or electrical hazards.

When using the rover station, make sure that the height of the survey pole setting in the DJI Enterprise App is consistent with the actual height.
When using the base station, it is available to rename product and reset password in the Precise Positioning Setting in the DJI Pilot 2.

Exporting and Processing Data

Base Station/Relay Station

The raw satellite observation data is recorded in DAT format files following the RTCM3.2 protocol, and stored in the product internal storage.
Hêza li ser cîhazê. Amûrê bi kabloyek USB-C bi komputerê ve girêdin.

Export the raw satellite observation data.
Import the data into DJI Terra for local PPK processing. Refer to the DJI Terra user manual for more information.

Make sure to use the DJI Terra of version 4.4 or later.

Third-party decoding tools is also available to be used to convert DAT format files to RINEX or other formats for PPK processing.

Rover Station
After completing the task, export the task report from the task library in the DJI Enterprise App. The export format supports mark file of JSON format for DJI Terra and checkpoint file of CSV (UTF-8) format.

Delîl File: Go to DJI Terra. Use GCP Management > Import Mark File to import the GCP points. DJI Terra will automatically recognize the type of GCPs and mark the error, performing result checks and accuracy optimization.

Cihê berçavkirinê File: It can be imported to the third-party mapping tools for accuracy checks.

Lênerrînî

Nûvekirina Firmware
Only the Relay Station mode can use DJI Pilot 2 to update the firmware. All operating modes can use DJI Assistant 2 to update the firmware.

Notices

Make sure the devices are fully charged before updating the firmware.
Make sure to follow all the steps to update the firmware. Otherwise, the update will fail.
Update the software in use to the latest version. Make sure the remote controller or the computer is connected to the internet during the update.

When updating the firmware, it is normal for the product to reboot. Wait patiently for the firmware update to complete.

Bikaranîna DJI Pilot 2

Make sure the D-RTK 3 is linked to the remote controller.

Run the app, and follow the prompt to update.

It does not support to update the product with the aircraft and remote controller at the same time.

Using DJI Assistant 2

Hêza li ser cîhazê. Amûrê bi kabloyek USB-C bi komputerê ve girêdin.
Launch DJI Assistant 2 and log in with an account.
Amûrê hilbijêrin û li milê çepê yê ekranê Nûvekirina Firmware bikirtînin.

Guhertoya firmware hilbijêrin û ji bo nûvekirinê bikirtînin. Firmware dê bixweber were daxistin û nûve kirin.
When the “Update successful” prompt appears, the update is completed, and the device will restart automatically.

DO NOT unplug the USB-C cable during the update.

Exporting the Log
Only the Relay Station mode can use DJI Pilot 2 to export the log. All operating modes can use DJI Assistant 2 to export the log.

Using DJI Assistant 2

Hêza li ser cîhazê. Amûrê bi kabloyek USB-C bi komputerê ve girêdin.

Launch DJI Assistant 2 and log in with an account.
Select the device and click Log Export on the left side of the screen.
Select designated device logs and save.

Storage, Veguhestin, û Maintenance

It is recommended to store the product in an environment at a temperature range from -5° to 30° C (23° to 86° F) when storing for more than three months.
It is recommended to store the product with a power level between 30% to 50% when storing for a long time. DO NOT store the product for an extended period after fully discharging. Otherwise, the battery may be over-discharged and cause irreparable damage to the battery cell.

Baterî ger ku ji bo demek dirêj were hilanîn û were hilanîn, dikeve moda hibernasyonê. Pîlê ji nû ve şarj bikin da ku wê ji xewê derxin.
Hilberê li nêzî çavkaniyên germahiyê yên wekî firne an germker, di bin tîrêja tavê ya rasterast de, an di hundurê wesayîtek di hewa germ de nehêlin.
Make sure to store the product in a dry environment. DO NOT disassemble the antenna during storage. Make sure that the ports are covered properly.

Fully charge the product at least every six months to maintain battery health.
Hilberê bi tu awayî ji hev dernexînin, an jî dibe ku pîlê birije, agir biteqe, an biteqe.

Veguheztina Beşê
When replacing the antenna, make sure to put the rubber sleeve on the antenna connector before installing the antenna onto the product. It is recommended to use the tool that meets the requirements for disassembly and assembly.
Tighten to the specified torque during installation.

Pêvok

Specifications
Serdana jêrîn bikin website for specifications: https://enterprise.dji.com/d-rtk-3/specs

EM JI BO WE LI vir in

Têkelî
DJI PIPTGIR

Ev naverok bêyî agahiyek pêşîn tê guhertin. Guhertoya herî dawî ji dakêşin

https://enterprise.dji.com/d-rtk-3/downloads

Heke di derbarê vê belgeyê de pirsên we hebin, ji kerema xwe bi DJI re bi şandina peyamek re têkilî daynin: DocSupport@dji.com

Belge / Çavkanî

	dji D-RTK 3 Multifunctional Station [pdf] Manual Bikarhêner D-RTK 3 Multifunctional Station, D-RTK 3, Multifunctional Station, Station
	dji D-RTK 3 Multifunctional Station [pdf] Rêbernameya Bikarhêner D-RTK 3, D-RTK 3 Multifunctional Station, Multifunctional Station, Station
	dji D-RTK 3 Multifunctional Station [pdf] Manual Bikarhêner D-RTK 3, D-RTK 3 Multifunctional Station, Multifunctional Station, Station