ROTEN GAM-1 IC3 ಅಯಾನ್ ಚೇಂಬರ್ ಸೂಚನಾ ಕೈಪಿಡಿ

ವೈಶಿಷ್ಟ್ಯಗಳು:
The IC3 Meter offers features such as high accuracy, multiple communication options, and compatibility with various monitoring software.

ಅಪ್ಲಿಕೇಶನ್‌ಗಳು:
The IC3 Meter is suitable for various applications and conforms to existing monitoring software like WinWRM2 and TeleView 2000.

ಆಪರೇಟಿಂಗ್ ಸೂಚನೆಗಳು:
Follow the steps outlined in the operating manual to properly use the IC3 Meter for radiation measurement.

ಬ್ಯಾಟರಿ ಬದಲಿ:
Refer to section 6 of the operating manual for detailed instructions on how to replace the battery of the IC3 Meter.

ಸಂವಹನ:
The IC3 Meter offers communication options through USB port and WRM2 communication. Refer to section 7 for more details.

ಮಾಪನಾಂಕ ನಿರ್ಣಯ:
Properly calibrate the IC3 Meter using the guidelines provided in section 8 of the operating manual for accurate measurements.

FAQ:

Q: Can the IC3 Meter be used for outdoor applications?
A: The IC3 Meter is designed for indoor use. Using it outdoors may affect its performance.

Q: How often should the IC3 Meter be calibrated?
A: It is recommended to calibrate the IC3 Meter annually or as per regulatory requirements.

Sales@rotemi.co.il

The publication, translation or reproduction, either party or wholly, of this document are not allowed without our written consent.

REVISION LOG: IC3 Ion Chamber

ಪರಿಷ್ಕರಣೆ #	ದಿನಾಂಕ	ಪರಿಷ್ಕೃತ ಪುಟಗಳು	ಕಾಮೆಂಟ್‌ಗಳು

We reserve the right to change specifications without advance notice.

The IC3 Meter

ಸಾಮಾನ್ಯ ವಿವರಣೆ
The IC3 is a battery operated, auto ranging, portable ion chamber survey meter designed for highly stable and accurate measurement of dose rates and accumulated dose of gamma, x-ray and beta radiation. The meter covers a measuring range of 1 µSv/h to 1 Sv/h (0.01 mR/h to 100 R/h ) in the dose rate mode, and 0.01 µSv to 10 Sv (1uR to 999 R ) in the integrated dose mode. The auto ranging meter utilizes a combination display consisting of a smoothed digital readout for minimum fluctuation and a two-decade analog bar which displays raw radiation data and provides a fast response. The IC3 survey meter combines an ionization chamber vented to atmospheric pressure, and a micro-controller to offer optimal performances and special features. Furthermore, it is a compact hand-held, lightweight, rugged meter, easy to use and maintain.

ವೈಶಿಷ್ಟ್ಯಗಳು

ವ್ಯಾಪಕ ಅಳತೆ ವ್ಯಾಪ್ತಿ.
Rugged, sturdy construction combined with low cost replacement parts.
Automatic Air Pressure (altitude) compensation.
ಸ್ವಯಂಚಾಲಿತ ತಾಪಮಾನ ಪರಿಹಾರ.
Built-in WRM2 socket for use with a wide range of transmitters.
Internal alarm thresholds for exposure rate.
Color coded display according to field range.
Dual-output display combines a digital dose rate display and the choice of bar graph or accumulated dose displays.
Display backlight offers selection of illumination intensity.
Special sleep mode enhances battery life and allows the instrument to remotely read and transmit data when the display is not required.
Built-in USB Type C power and communication connection.
Capability to provide online rate graph.
Capability to store reading and download to PC.
Easy to use, ergonometric menu which can be configured using external software.

ಅಪ್ಲಿಕೇಶನ್‌ಗಳು

Survey instrument, with simple data storage and downloading to external software.
Supports ALARA principles by allowing operators to obtain readings remotely from the radiation fields.

Real-time exposure rate monitoring connected to a WRM2 transmitter. Transmitted data conforms to existing MGPI monitoring software (i.e. WinWRM2, TeleView 2000)

IC3 Specifications

ಅಳತೆ ಶ್ರೇಣಿ	1 µSv/hr to 1 Sv/hr (0.1 mR/hr to 100 R/hr)
Accuracy (¹³⁷Cs)	±10% of reading within measuring range
Gamma Energy Dependence	Better than ± 20% from 20 keV to 3 MeV
Beta Energy Dependence	Better that ± 20% from 200 keV
Angular Dependence (¹³⁷Cs)	Less than ± 30% (for ±90^o of front direction)
Ion Chamber Volume	350 ಸೆಂ.ಮೀ³
Chamber Wall and Cover Thickness	1000 mg/cm² (tissue equivalent)
ಕಿಟಕಿಯ ದಪ್ಪ	7 mg/cm² ಮೈಲಾರ
X-Ray Pulse reading	From 50 nano-sec Pulses, 25 keV
ಪ್ರತಿಕ್ರಿಯೆ ಸಮಯ	2 sec’s. for readings above 1 mR/h
	5 sec’s. for auto-ranging change, from Low Range to High Range
	(2 sec’s. +3 additional seconds for auto ranging delay)
ಶಕ್ತಿಯ ಮೂಲ	USB Connector from Mains
	Four 1.5 Volt AA batteries – 120 hours of continuous operation
	Built in automatic battery check
ಪ್ರದರ್ಶನ	ಬಣ್ಣ TFT ಡಿಸ್ಪ್ಲೇ
	3 digits with auto ranging units of measurement
ಡೇಟಾ ಲಾಗಿಂಗ್	100 data records
ತಾಪಮಾನ ಶ್ರೇಣಿ	Operation: -10^oC ನಿಂದ +50^oC (15^oಎಫ್ - 122^oF)
	ಸಂಗ್ರಹಣೆ: -20^oC ನಿಂದ +60^oಸಿ (-5^oಎಫ್ - 140^oF)
ಆರ್ದ್ರತೆ ಶ್ರೇಣಿ	Up to 95% RH (noncondensing)
ಆಯಾಮಗಳು	Width: 13cm (5.1″), length: 24cm (9.5″), height: 14cm (5.5″)
ತೂಕ	1,000 g (2.4lb) including batteries
ಕೇಸಿಂಗ್	ಹೆಚ್ಚಿನ ಪರಿಣಾಮ ಎಬಿಎಸ್
ಡೇಟಾ ಸಂಪರ್ಕ	USB for calibration, configuration, upgrade firmware and download stored data points
	Optional Internal 900 MHz or 2.4 GHz RF Radio/Wifi (WRM2)
ಮಿತಿ ಎಚ್ಚರಿಕೆಗಳು	2 x levels, User selectable

ಆರ್ಡರ್ ಮಾಡುವ ಮಾಹಿತಿ

BAK-0268 IC3 Ion Chamber – Lockable Battery Cover
BAK-0245 IC3 Ion Chamber – Battery Cover

HIGH & LOW Range Modes of Operation

The IC3 is a survey meter with auto ranging capabilities. To accurately measure the full radiation range, the electronics in the EM board contain two amplifiers for different measuring ranges. The measuring mode switches into HIGH RANGE at 250 mR/h (2.5 mSv/h) and back into LOW RANGE at 170 mR/h (1.7 mSv/h). This switchover is performed automatically according to the radiation reading level.

In the HIGH RANGE, the units are expressed in R/h; in LOW RANGE, the units are expressed in mR/h. For increasing Dose Rate fields: The meter reading uses the factor F1 till 250 mR/h and F2 above 250 mR/h, and for decreasing dose rate fields: The meter reading uses the factor F2 till 170 mR/h and F1 below 170 mR/h

ಆಪರೇಟಿಂಗ್ ಸೂಚನೆಗಳು

ಬಳಕೆಗೆ ತಯಾರಿ

Remove the instrument from the shipping container and inspect for any physical damage. In the case of damage, report it immediately to your local distributor.
Do not attempt to install or operate damaged equipment since safety and performance may be affected.

ಗಮನಿಸಿ: The manufacturer recommends that the end user / owner perform periodic inspections (during daily performance checks) of the meter to ensure proper operational use and safety.

General Inspections to be performed:

Check that the Beta Shield has not been damaged or disformed during shipment.

Check that the Battery Cover has not been damaged during shipment.
Shake the meter and check that there are no loose pieces in the instrument

ಪ್ರಾರಂಭ-ಅಪ್

Remove the battery compartment cover located on the handle of the Meter by lifting the locking catch upwards with your fingernail. To close the cover simply press it into the handle. A battery cover with locking capabilities is available.
Insert 4 x 1.5 v AA battery cells into the battery compartment as per the polarity shown in the diagram.
Press the ON/OFF push-button to turn the meter on by holding the ON/OFF button for five (5) seconds.

If the initial screen shows the firmware version, serial number and battery icon, the connection is established.

ಗಮನಿಸಿ: In cases where the Instrument has been stored without batteries for more than a few days, the internal clock may have stopped and not be accurate. This inaccuracy may cause the M-Cal or D-Cal errors to be skipped. We recommend that after storing the instruments without batteries, the IC3 meter be connected to the RMVC Software which will automatically update the internal clock in the Meter.

Following a successful self-test startup and offset adjustment, the meter is ready for use.

ಪ್ರದರ್ಶನ

Icon Display Bar

Alarms Segment and priority

ಐಕಾನ್	ವಿವರಣೆ
M-O.F	Overflow Condition on Meter(>4R/h)
L.BAT	Meter battery voltage too low, must be replaced.
M-IC	The Ion Chamber is malfunctioning
M-HV	ಹೆಚ್ಚಿನ ಸಂಪುಟtage to the Ion Chamber is malfunctioning
M-CAL	The Calibration to the Detector is overdue

Menu Display Bar
The IC3 Menu provides several lines containing operational functions. Upon power up the First Line is displayed. Each additional line is accessed by clicking with a short press on the MENU Command (POWER Button). The order of the commands and the used commands in this menu can be configured using our RMV software which is freely available off our website. The Menu provides for 4 lines with 3 commands on each line. There is one more command that is available and can be inserted in place of any of the commands below:

ಮೆನು	FRZ	ಎಸ್‌ಪಿಕೆ	ಗ್ರಾಫ್
ಮೆನು	THR	ರೇಂಜ್	ಡೋಸ್
ಮೆನು	WRM	BRGT 1	ನಿದ್ರೆ
ಮೆನು	ಅಂಗಡಿ	CAL	ಅನಲಾಗ್

Freeze icon will be displayed to show the instrument is currently in the Freeze mode.

Speaker [SPK] Mode
This mode activates the Speaker to provide clicks and error alerts. The SPK Icon will be displayed to show the instrument is currently providing audio feedback to the user. If earphones are connected to the USB Port, the clicks will be muted on the meter and a varying warble will be heard on the earphones.

GRAPH Mode
This command activates a graph in the lower part of the display. The highest value of the graph is displayed to the left of the graph. The graph displays data for a period of 30 minutes, updates every second from right to left.

THR (Threshold) Mode
This command displays the three threshold levels and associated colors. The threshold levels can be set either directly through the touch screen of the IC3 or by connecting the meter to our RMVC Software which is freely available off our website. See paragraph 4.4.5 Threshold Selection for instructions on how to use the touchscreen or paragraph 8 Using RMVC to setup the IC3 meter.

RANGE Mode
This command allows the user to manually select either the HR (High Range), LR (Low Range) or WR (Wide Range) of the external Detector. An Icon (HR. LR or WR) will be displayed according to the selected range. (Partially operational).

Dose Mode
This command will display the accumulated Dose of the external detector since the instrument was powered up. The Dose will be cleared when the instrument is switched off.

WRM Mode
This command is used to activate the WRM2 transmitter in the instrument. A click will activate the WRM2. An appropriate icon ಪ್ರದರ್ಶಿಸಲಾಗುತ್ತದೆ.

Bright (BRGT #) Mode
This command dims and brightens the screen. It will default to the second brightest selection upon power up. Using brighter screens will increase power consumption and reduce battery life.

ಸ್ಲೀಪ್ ಮೋಡ್
This command will activate the sleep mode of the instrument by closing the display. The IC3 will continue to measure the radiation levels and transmit data records to a remote station. The IC3 will activate the display if the instrument is moved. picked up or an alert/alarm occurs.

STORE Mode
This command will store up to 100 points of dose rate data. The number will decrease each time the button is pressed 22 – the displayed number represents the available points remaining. This data may be obtained by RMC in the RMVC software. Once the data is viewed through the software and the window closed – it will delete all data. The data may be saved to the user’s computer.

CAL Mode
This command will allow you to manually input calibration factors into each of the calibration points.

ANALOG Mode
The Analog mode displays an auto scaling bar graph for raw radiation intensity indication. The bar graph displays radiation levels before they are processed by smoothing algorithms and is therefore very useful for searching for hot spots or other irregularities in the area being surveyed. ಸಾಮಾನ್ಯ ಕಾರ್ಯಗಳು

ಅಳತೆ ವಿಧಾನಗಳು

The meter has two measuring modes:

Auto-Range – 1 µSv/hr to 2.5 mSv/h and 2.5 mSvh to 1 Sv/h (0.1 mR/h to 250 mR/h and 0.25 R/h to 100 R/h

High Range Only 0.1 mSv/h to 1 Sv/h (0.01 R/h to 100 R/h )

ಆಟೋ ರೇಂಜ್ ಮೋಡ್

In this mode the meter’s total measuring range is from 1 µSv/hr to 1Sv/h (0.1 mR/h to 100 R/h).

For efficient measuring purposes, the total range is divided in two narrower ranges that are automatically switched:
Low Range: 1 uSv/h to 2.5 mSv/h (0.1 mR/h to 250 mR/h).
High Range: 2.5 mSv/h to 1 Sv/h (0.25 R/h to 100 R/h).

Switching from low range to high range is performed in a field of 2.5 mSv/h (250 mR/h). Switching from high range to low range is performed in a field of 1.7 mSv/h (170 mR/h).
Response time in a field higher than 0.01 mSv/h (1 mR/h) is 2 seconds.

Dose Rate Display

Range: 1 µSv/hr to 1 Sv/hr (0.1 mR/hr to 100 R/hr)
The Display will change units of measurement according to the level of radiation being measured:

Measuring range in Dose mode

0.01 uSv/h to 9.99 Sv (1 uR to 999 R)

Readings are displayed digitally and updated every second.

Threshold Selection

The IC3 meter can store two dose rate threshold levels which are reflected in three colored frames (green, yellow and red) in the Display, and provide a visual indication to the user of the radiation levels detected by the external detector.

These thresholds are set using the touch screen buttons on the Display or using the external RMV software which is freely available off our webಸೈಟ್.
To see the current Threshold settings, click on the THR (Threshold) command in the Menu Display Bar. The black background marks the active thresholds.
The following will be displayed: THR < 1 THR < 2 THR > 2 THR. U = 3

THR #1 is the first threshold to be selected.

The Menu changes to the following: MENU DOWN UP NEXT

ಮೆನು	Saves the current setting and displays the next MENU set. Once you have finished setting up the thresholds, click MENU.
ಕೆಳಗೆ	Reduces the value of the threshold by 1. You cannot reduce to less than 1.

UP	Increases the value by 1 until it reaches the value of the last threshold.
ಮುಂದೆ	Moves the black marker to the next threshold.

The User threshold provides an Audio Alert without changing background color. The data record will provide the status as User Threshold.

Meter & Detector Alerts and Alarms
In case of malfunction in the meter or detector an audible and visual alarm will be displayed. Pressing on any push button will mute audible alarm.

D-HV	ಹೆಚ್ಚಿನ ಸಂಪುಟtage to the Meter is malfunctioning
M-O.F	Overflow Condition on Meter(>4R/h)
ಎಚ್ಚರಿಕೆ	Over threshold Condition (External Detector), un latch alarm.
L.BAT	Meter battery voltage too low, must be re place.
M-IC	The Ion Chamber is malfunctioning
M-HV	ಹೆಚ್ಚಿನ ಸಂಪುಟtage to the Internal Detector is malfunctioning
M-CAL	The Calibration to the Internal Detector is overdue

Push-buttons Function

Push button function Control

To power up the instrument, click on the On/Off Button
To switch off the instrument, click, with a long press on the On/Off Button To switch between menu pages, a short press on the MENU (Power) Button

ಮೀಟರ್ ಪ್ರದರ್ಶನ

The first big characters are used to display the external detector measuring reading.
The second smaller character is used to display different options according to operator’s request.

ಬ್ಯಾಟರಿ ಬದಲಿ

Remove the battery compartment cover located on the handle of the Meter by lifting the locking catch upwards.
Insert 4 x 1.5 v AA battery cells into the battery compartment as per the polarity shown in the diagram.
Press the ON/OFF push-button to turn the meter on by holding the ON/OFF button for five (5) seconds.

If the initial screen shows the firmware version, serial number and battery icon, the connection is established.

ಸಂವಹನ

The IC3 meter offers several communication options:

USB ಪೋರ್ಟ್

This External USB port is used for several purposes:

Provides Power to the IC3 Meter to enable it to operate without batteries and be a temporary area monitor.
Connects between the IC3 Meter and our RMVC Software to allow you to:
- Setup the Parameters of the IC3 Meter.
- Calibrate the IC3 Meter.
- Download data online and produce graphs.

WRM2 Communication
The IC3 Meter can support a WRM2 transmitter which is installed into the Control Box and activated via the Menu.

ಮಾಪನಾಂಕ ನಿರ್ಣಯ

ಉದ್ದೇಶ
Provide guidance for calibration of the IC3 Meter.

ಉಲ್ಲೇಖಗಳು
ANSI-323, American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments

Calibration via the Touch Panel on the instrument

The IC3 Meter can be calibrated in the field without using any external programs. The calibration is achieved by clicking on the Menu pushbutton till the CAL. Command appears.
The CAL button should be setup (Using the RMVC software) to be the last Command in the Menu.

Click Cal, the Instrument will require the user to click Cal again to avoid activating the calibration function unintentionally, the following display appears:
Note that the Calibration Date will update immediately to a year from the time you clicked on the Cal command. Even if no modifications were made to the Factors.
The First Calibration Factor F1 is the gamma calibration factor (beta slide closed) and the second factor F2 is the beta calibration factor (Beta slide opened).

Both points should be measured at around 2.5 mSv/h (250 mR/h).

The DOWN and UP commands are used to change the F1 Factor. The reading above will automatically update according to the modifications and each time you click on DOWN or UP a new calibration factor is saved. You can exit this Display at any time by clicking the MENU command. The NEXT command is used to change the next factor. Each time you click on DOWN or UP a new calibration factor is saved. You can change the next factor by clicking NEXT or exit this Display at any time by clicking the MENU command.

Calibration via RMVC Software 8.5. Prerequisites
Examine the instrument for damage that could affect operation.

ಸೆಟಪ್
Connect a USB C cable from the IC3 Meter to the RMVC software. Start up the RMVC software.

Click Connect in the main menu: ಸೂಚನೆ - if this is the first time connecting the IC3 Meter to the user computer, you will need to establish which com port is to be used. To do this go to Device Manager and check the com ports. The user should see a port like the one shown below:

If the correct port is not shown, follow the below instructions:

Click on the Getting Started Button in RMVC

Follow the onscreen instructions and download the VCP driver from the provided link. The following will be displayed:

Select or verify the correct Com Port and the correct baud rate (should be 115200). Click Connect.
Prior to clicking on RMC, ensure that the IC3 Meter is communicating to the software (radiological information is displayed in Meter Rate / Meter Dose and Meter Serial No. is displayed). Once this information is displayed click on RMC.
Enter in login information, User Name (this is user defined – for example user Windows Process ID) and password – ram.

The following screen will appear after logging into RMVC. The Accuracy Information may be updated per site procedures or protocols. Source information is per site procedure or protocols. Once updated; select OK. Note: The Calibration Due will track when the Calibration is Due and show a Calibrate Alarm (D-CAL) when overdue.

ಮಾಪನಾಂಕ ನಿರ್ಣಯ
Click Meter detector selection for calibration.

ಸೂಚನೆ: In the table below, it is recommended to include a notation in the distance value to identify the points for calibration factors (F1, F2, etc.) – e.g. 58*F1.

Sample entry below

If this is not the initial calibration skip this step. Enter Source information into the provided chart in the software (Src. – Source Number; Ref. Point – Defined Dose Rate; Distance – Defined Distance from Source; Attenuator – user applied shielding factor for source – if none is utilized enter 0. See paragraph 8.8 below for an example of a calibration certificate.

Recommended Calibration Points

ಮೀಟರ್		GM Tube
ಡೋಸ್ ದರಗಳು	ಮಾಪನಾಂಕ ನಿರ್ಣಯದ ಅಂಶಗಳು	ZP1201 or Equivalent
2.5 mSv/h (250 mR/h)	F1 (Gamma) Closed Shield
2.5 mSv/h (250 mR/h)	F2 (Gamma + Beta) Open Shield
790 mSv/h (79 R/h)	OFLO 1 test
5 Sv/h (500 R/h)	OFLO 2 test

Higher calibration points may be used if the customer verifies acceptability of high range response in switchover range.
The above entered information may be saved as a template to be used for future calibrations. Click the save icon and name for later use.
If not already performed, repeat procedure and create the second table for dose rate calibration point for the beta reading with the beta shield open making sure that the display shows Gamma & Beta
Select the Load Template Icon, then navigate to the storage location and select Open.
Expose the detector to a radiation field appropriate for the desired point.
In the associated point – click in the As Found Block. This will insert the dose rate information.

If a value was incorrectly entered into the wrong block; the user may select a different block and then click on the correct block again to update or the following icon may be clicked Remove Measure Points (Caution – this removes all the data .

If the As Found data is within the sites requirement then the calibration is complete. If As Found is not within tolerance, then proceed to the next step. To adjust the F1 Factors – click the calibrate button.

The following will be displayed for meter calibration:

The dose rate value will be displayed above the adjustment bar(s). To adjust the meter to the reference dose rate click on either the up or down arrows.
Once the desired meter dose rate is obtained; click on the associated Calibration Point (e.g., F1) update and then exit.
The Cal. Point Value will populate when the update box is checked:
Repeat steps 6.5.14 thru 6.5.17 for all other F Value Calibration Points. Once all Calibration Factors (F Values) are completed, complete the calibration by updating the remaining Values in the Cal. Point Column. (Expose the meter / detector to the appropriate value and click in the Ca. Pint Block of that point to update.)
Once completed; click on the icon for Create Calibration Certificate.
Once the Calibration Certificate is started, the user may add a custom Header or Footer to the document prior to printing. Select either Add Company Header or Add Footer, and select the file ಬಳಸಿಕೊಳ್ಳಬೇಕು.

ಮಾಪನಾಂಕ ನಿರ್ಣಯ ಪ್ರಮಾಣಪತ್ರ

IC3 Calibration Cemcate

ಕ್ರಮ ಸಂಖ್ಯೆ: 0123456788
Accepted Accuracy :
Asleft:
As found: 20 %
ದಿನಾಂಕ : 08/08/2023

ಮೂಲಗಳು:

Cs1374GBq(110mCi)
= Cs13740TBq(916Ci)

Calibrated by RAM Fl. 076

Calibration Date : 08/08/2023
Reviewed by : F2: 0.80
Calibration Due : 08/08/2024 F3: 100 F4: 1.00

Linearity Chart

Using RMVC to setup the IC3 meter.

The RMVC Software Interface, along with the manual is freely available to be downloaded from our webನಲ್ಲಿ ಸೈಟ್ https://www.rotem-radiation.co.il/service2/rotem-meter-view-3000/
After Connecting the RMVC to the IC3 Meter, click Device Setup to see the following screen:

ಸೆಟ್ಟಿಂಗ್‌ಗಳು

ಸಾಧನದ ಹೆಸರು:	Read from the Instrument
ಫರ್ಮ್‌ವೇರ್ ಆವೃತ್ತಿ:	Read from the Instrument
ಸರಣಿ ಸಂಖ್ಯೆ:	Read from the Instrument and can be modified. Appears on the calibration Certificate and other hard copies of data generated from this software.
WRM Serial Number:	Used, when sending data to a remote station, to identify the origin of the data string
ಅಳತೆ ಘಟಕ:	User Selectable between Roentgen or Sievert units.
ವೈರ್‌ಲೆಸ್ ಟ್ರಾನ್ಸ್‌ಮಿಷನ್:	ಬಳಕೆದಾರ ಆಯ್ಕೆಮಾಡಬಹುದಾದ
Default brightness level:	User Selectable, the dimmer the display, the larger the battery life span
ಮಧ್ಯಂತರಗಳು:
Sleep Interval (Sec.):	User Selectable to define the period time to pass before the display turns off. The instrument will continue to measure radiation, send data to a remote station and in case of an alert or alarm, the display will light up.
Rate Interval (Sec.):	Period of time between transmissions to PC and WRM2 ರಿಸೀವರ್.
Threshold Interval (Sec.):	Period of time between transmissions to PC and WRM2 Receiver when the instrument is in Over threshold interval status.
ಮಿತಿಗಳು:
Threshold #1 (Green to Yellow):	User selectable, the Display outline will change color and an audio signal will be sounded.
Threshold #2 (Yellow to Red):	User selectable, the Display outline will change color and an audio signal will be sounded.
User Threshold:	Activates buzzer only. No color change, RMVC will display User threshold.
Push Button Menu:	User Selectable. Used to set up the menus in the display. See details in the table below

ಪುಶ್ ಬಟನ್ ಮೆನು

ಫ್ರೀಜ್:	Freeze the dose rate reading at the highest value
SPK:	Activate/Mute Speaker
GRAPH:	Display/Hide a graph of the dose rate
THR:	Display/Hide threshold settings
ಶ್ರೇಣಿ:	Display which detector is currently operating (High Range – HR or Low Range – LR)
ಡೋಸ್:	Display/Hide Accumulated Dose
WRM:	Activate WRM2 communication
BRGT #:	ಪ್ರದರ್ಶನದ ಹೊಳಪನ್ನು ಬದಲಾಯಿಸಿ

ನಿದ್ರೆ:	Activate Sleep mode
ಅಂಗಡಿ:	Used to Store date records in the meter
ಅನಲಾಗ್:	Displays/Hides an Analog Display for the External Detector along with reading
ಕರೆ:	Used to calibrate the two calibration points.

Once a command has been modified it will appear in red until the Update Device button is pressed.

ದಾಖಲೆಗಳು / ಸಂಪನ್ಮೂಲಗಳು

ROTEN GAM-1 IC3 Ion Chamber [ಪಿಡಿಎಫ್] ಸೂಚನಾ ಕೈಪಿಡಿ
GAM-1 IC3 Ion Chamber, GAM-1, IC3 Ion Chamber, Ion Chamber, Chamber

ROTEN GAM-1 IC3 Ion Chamber

ಉತ್ಪನ್ನ ಬಳಕೆಯ ಸೂಚನೆಗಳು