ಸಹೋದರ AX-20 ಎಲೆಕ್ಟ್ರಾನಿಕ್ ಟೈಪ್ ರೈಟರ್ ಬಳಕೆದಾರರ ಕೈಪಿಡಿ

brother AX-20 Electronic Typewriter

ಉತ್ಪನ್ನ ಮಾಹಿತಿ

ವಿಶೇಷಣಗಳು:

• ಬ್ರ್ಯಾಂಡ್: ಸಹೋದರ
• ಮಾದರಿ: AX-20
• ಪ್ರಕಾರ: ಟೈಪ್ ರೈಟರ್
• ಹಸ್ತಚಾಲಿತ ಪೂರೈಕೆದಾರ: Manualslib.com
• ಸ್ವರೂಪ: PDF

ಉತ್ಪನ್ನ ಬಳಕೆಯ ಸೂಚನೆಗಳು

1. Setting Up the Typewriter:
   Follow these steps to set up your Brother AX-20 typewriter:
   1. Place the typewriter on a stable surface.
   2. Insert the paper roll and ensure it is properly aligned.
   3. ಸೂಕ್ತವಾದ ವಿದ್ಯುತ್ ಮೂಲಕ್ಕೆ ಪವರ್ ಕಾರ್ಡ್ ಅನ್ನು ಸಂಪರ್ಕಿಸಿ.
   4. Turn on the typewriter using the power switch.
2. Typing Instructions:
   To type on the Brother AX-20 typewriter, follow these steps:
   1. Position the paper in the desired location.
   2. Use the keyboard to type characters.
   3. Press the carriage return key to advance to the next line.
   4. Utilize correction features if needed.
3. ನಿರ್ವಹಣೆ:
   Regular maintenance will ensure the optimal performance of your typewriter:
   • Clean the type elements and platen regularly.
   • Keep the typewriter covered when not in use to prevent dust accumulation.
   • ನಿರ್ದಿಷ್ಟ ನಿರ್ವಹಣಾ ಕಾರ್ಯಗಳಿಗಾಗಿ ಬಳಕೆದಾರ ಕೈಪಿಡಿಯನ್ನು ನೋಡಿ.

ಪದೇ ಪದೇ ಕೇಳಲಾಗುವ ಪ್ರಶ್ನೆಗಳು

Q: How do I change the typewriter ribbon?

A: To change the typewriter ribbon, refer to page X of the user manual for detailed instructions on ribbon replacement.

Q: Can I use different paper sizes with the AX-20 typewriter?

A: The AX-20 typewriter is designed to accommodate standard paper sizes. Using non-standard sizes may affect performance.

Q: What should I do if the typewriter keys are sticking?

A: If keys are sticking, try cleaning the key mechanisms with compressed air or contact customer support for further assistance.

ಮುಗಿದಿದೆview

Congratulations on choosing the Brother electronic typewriter. This product is designed to deliver years of reliable operation. To ensure optimum performance, please read this instruction manual carefully and refer to it whenever necessary.

ನಿಮ್ಮ ಟೈಪ್ ರೈಟರ್ ಈ ಕೆಳಗಿನ ಐಟಂಗಳೊಂದಿಗೆ ಬರುತ್ತದೆ:

• cassette ribbon
• cassette daisy wheel
• correction tape
• ಸೂಚನಾ ಕೈಪಿಡಿ

Please make sure all are included in this package. 

This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type-tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television recep­tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• ಸ್ವೀಕರಿಸುವ ಆಂಟೆನಾವನ್ನು ಮರುಹೊಂದಿಸಿ
• relocate the typewriter with respect to the receiver
• move the typewriter away from the receiver
• plug the typewriter into a different outlet so that the typewriter and receiver are on different branch circuits.

ಅಗತ್ಯವಿದ್ದರೆ, ಹೆಚ್ಚುವರಿ ಸಲಹೆಗಳಿಗಾಗಿ ಬಳಕೆದಾರರು ಡೀಲರ್ ಅಥವಾ ಅನುಭವಿ ರೇಡಿಯೋ/ಟೆಲಿವಿಷನ್ ತಂತ್ರಜ್ಞರನ್ನು ಸಂಪರ್ಕಿಸಬೇಕು.

ವೈಶಿಷ್ಟ್ಯಗಳು

• This Brother typewriter features a one-line correction memory, automatic relocation after corrections, and many other functions making it the perfect choice for home or office applications.
• In addition, the approximately 5,000-character memory lets you store text that can be printed as many times as desired without retyping.
• Some of the outstanding functions of this typewriter are illustrated in the letter below. Turn to the circled page numbers for an explanation of each.

ಪ್ರಾರಂಭಿಸಲಾಗುತ್ತಿದೆ

ಸಾಮಾನ್ಯ

1. Remove the lid cover by lifting the two tabs.
2. Open the power cord compartment at the back right of the typewriter by pressing the two tabs at the upper corners. Remove the power cord from the compartment, and insert the plug into any standard AC electrical socket. Then close the cover, fitting the cord into the slot provided. When putting away the cord, put in the plug first.
3. Open the cover over the platen using the two tabs located on the front corners. This cover folds back to act as a paper support.
4. Make sure that the carrier protector used during transport has been removed (see the unpacking instructions). Turn on the power using the switch on the lower left rear corner, of the machine.

ಟಿಪ್ಪಣಿಗಳು: 

• Whenever the power is turned on, the carrier moves to the extreme left end of the platen and then returns to the left margin.
• Opening the top cover automatically shuts off the power. When this cover is closed, the carrier moves to the extreme left, and then returns to the position it was in when the cover was lifted.

ನಾಮಕರಣ

ದೇಹ

ಕೀಬೋರ್ಡ್

ಹಿಡಿದುಕೊಳ್ಳಿ key, and while holding it down, press the appropriate key to activate these functions.

BASIC TYPING

ಕಾಗದವನ್ನು ಸೇರಿಸುವುದು

1. Insert the paper behind the platen, aligning the left side with the paper guide.
2. Turn the platen knob (right or left side) until the top edge of the paper appears again.
3. Lift the paper bail, and continue to turn the platen knob until the paper extends past the bail.
4. If the paper did not feed in a straight line, push the paper release lever. This loosens tension on the paper so that it can be adjusted as necessary. Then return the lever to its forward position.
5. Return the paper bail to its original position.

ಗಮನಿಸಿ:
Press the platen release push button if you wish to align the paper with a position on printed forms.

Selecting pitch
The typewriter offers two typing pitches:

• Pica (10 pitch): 10 characters per inch
• Elite (12 pitch): 12 characters per inch

Change the pitch by pressing the green pitch selector at the far left corner of the keyboard. A red lamp lights to indicate your choice.

ಟಿಪ್ಪಣಿಗಳು:

• Scales for the two pitches appear on the margin scale base. The typing position indicator below the margin scale base indicates your present position.
• This typewriter has a back-up battery that protects the memory and various settings, including the pitch setting, for one week. The battery is fully charged after using the typewriter for one hour.

Selecting line spacing
Use the line space selector to choose the number of lines you wish the paper to be fed when you press the key. The line space setting can be changed at any time.

ಅಂಚುಗಳನ್ನು ಹೊಂದಿಸಲಾಗುತ್ತಿದೆ

Left margin:

1. Move the carrier to the desired position using the (space) bar, ಕೀ, ಮತ್ತು key as required.
2. ಒತ್ತಿರಿ key. The left margin is now set.

Right margin:

1. Move the carrier to the desired position using the (space) bar, ಕೀ, ಮತ್ತು key as required.
2. ಹಿಡಿದಿಟ್ಟುಕೊಳ್ಳುವಾಗ ಕೀ, ಒತ್ತಿರಿ key. The right margin is now set.

ಗಮನಿಸಿ:
The minimum distance between margins is two inches. In Pica, this equals 20 spaces; and in Elite, 24 spaces.

Margin release:
To move the carrier past an existing margin, press the ಕೀ.

Preset margins:
The following margins are preset in the typewriter, effective until new margins are set.

ಗಮನಿಸಿ:
The backup battery protects margin settings for one week. It is fully charged after using the typewriter for one hour.

Hotzone
The six spaces immediately before the right margin are called the Hot Zone. A warning beep will sound when the Hot Zone is reached.

Returning the carrier

• To return the carrier manually, simply press the key on the lower right corner of the keyboard.
• Paper is advanced the number of lines set with the line space selector.

Typing upper-case characters

• To type upper case characters, press either the right or left key. Releasing this key returns the keyboard to the lowercase mode.
• For continuous upper-case typing, press the key. To return to lowercase typing, press either the right or left ಕೀ.
  ಒಂದು ಕೆಂಪು ಎಲ್amp beside the key lights whenever the or ಕೀಲಿಗಳನ್ನು ಒತ್ತಲಾಗುತ್ತದೆ.

ಬ್ಯಾಕ್‌ಸ್ಪೇಸಿಂಗ್
This typewriter offers three separate backspace functions.

1. To move back one space at a time, press the ಕೀ.
   To move continuously to the left, hold down the key. The carrier will move towards the left margin until the key is released.
2. To move the carrier quickly to the left margin, hold down the key and touch the key (express backspace).
3. To move back half a space, press the key. The usefulness of this function is explained.

ತಿದ್ದುಪಡಿಗಳು

This typewriter has a one-line correction memory that makes it possible to delete or correct any characters on the same line with the touch of a single key. Manual cor­rections for text outside the memory range are also quick and easy. And thanks to Brother’s three-strike correction system (over the character, slightly to the right, and slightly to the left), your text always looks clean and professional.

Memory correction

ಗಮನಿಸಿ:
To erase a series of characters, merely hold down the key. The machine will backspace and correct continuously until you release the key or reach the end of the line.

Word out/Line out
This function permits you to erase one word at a time. Position the carrier at the right end of the word. Then press the ಕೀ.

ಟಿಪ್ಪಣಿಗಳು:

• If the carrier is positioned at an intermediate position under the word, only the letters from that position to the beginning of the word will be erased.
• ಕೆಳಗೆ ಹಿಡಿದಿಟ್ಟುಕೊಳ್ಳುವುದು key and pressing the key erases all letters from the present position to the beginning of the line. Press the key to stop erasing.

ಹಸ್ತಚಾಲಿತ ತಿದ್ದುಪಡಿ
Manual correction is used for mistakes outside of the correction memory range (i.e., errors on another line).

1. ಮೊದಲು ಒತ್ತಿರಿ key to clear the correction memory.
2. Next, using the platen knob, (space) bar, and key as required, aWgn the carrier with the error.
   flattered by your interest in our Brazilian operation, and
3. ಹಿಡಿದಿಟ್ಟುಕೊಳ್ಳುವಾಗ ಕೀ, ಒತ್ತಿರಿ ಕೀ.
4. Then type the incorrect character to erase it from the page. Make sure to press the key for uppercase characters.
   flattered by your interest in our Brazilian operation, and
5. ಸರಿಯಾದ ಅಕ್ಷರವನ್ನು ಟೈಪ್ ಮಾಡಿ.
   flattered by your interest in our Brazilian operation, and

Insertions
This Brother typewriter features a half-backspace function that makes it easy to add letters to already-typed text.

Thank you very much for your recent letter. We are

ಮಾಜಿ ರಲ್ಲಿample above, the “n” has been omitted from the word “recent”. This mistake can be corrected using the simple correction method explained on the previous pages, but unless the entire line is deleted and then retyped, this creates a cluttered, unbalanced look. Therefore:

1. ಸಂಪೂರ್ಣ ತಪ್ಪಾದ ಪದವನ್ನು ಅಳಿಸಿ.
   Thank you very much for your letter. We are
2. Align the carrier with the first letter of the deleted word.
3. ಒತ್ತಿರಿ ಕೀ.
4. Type in the correct word. The machine automatically spaces the letters so you can hardly tell an insertion was made.
   Thank you very much for your recent letter. We are

ಅಳಿಸುವಿಕೆಗಳು
Flattered by your interest in our Brazilian operation, and the example above, there are too many “r”s in the word “interest”. Therefore:

1. ಸಂಪೂರ್ಣ ತಪ್ಪಾದ ಪದವನ್ನು ಅಳಿಸಿ.
   flattered by your in our Brazilian operation, and
2. Align the carrier with the second letter of the deleted word.
3. ಒತ್ತಿರಿ ಕೀ.
4. Type in the correct word.
   flattered by your interest in our Brazilian operation, and

ಇತರ ಕಾರ್ಯಗಳು

Repeating characters & functions
The following functions can be repeated simply by holding down the appropriate key:

All characters and other functions can be repeated by pressing the desired key followed by the ಕೀ. ದಿ key will automatically repeat the last character or function you typed.

Setting tabs

1. To set a tab, move the carrier to the desired position using the (space) bar and key as required.
2. ಒತ್ತಿರಿ key to set the tab. A maximum of 12 tabs can be set.
3. ಒತ್ತಿರಿ key to advance to the next tab position.

ಗಮನಿಸಿ:
This typewriter has a back-up battery which protects tab settings for one week.

Clearing tabs
To clear a single tab

1. Move the carrier to the position where you wish to clear a tab using the ಕೀ.
2. ಹಿಡಿದುಕೊಳ್ಳಿ ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key to clear the tab.

To clear all tabs
ಹಿಡಿದುಕೊಳ್ಳಿ ಕೀ, ಮತ್ತು ಒತ್ತಿರಿ key. Then type the ಕೀ.

ಕೇಂದ್ರೀಕರಣ
With this Brother typewriter, you can automatically center text between the margins or between tabs.

To center between margins:

1. Move the carrier to the left margin, hold down the ಕೀ, ಮತ್ತು ಒತ್ತಿರಿ key. The carrier will advance to the center of the margins.
2. Type the text. The carrier will backspace one half-space for each character typed.
3. ಒತ್ತಿರಿ or to print text.

ಟಿಪ್ಪಣಿಗಳು:

1. If you make an error, press the key to cancel all text and return the carrier to the center of the margins. Then retype the text.
2. ಒತ್ತಿರಿ key twice to cancel the centering mode.
3. If the centering function is activated while at a tab stop, the text will be centered between tab stops and not between the margins.

Sample Printout

 

To center between tabs:

1. ಅನ್ನು ಬಳಸುವುದು key, move the carrier to the tab position. Hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key. The carrier will move to the center of the tabs.
2. Type the text. The carrier will backspace one half-space for each character typed.
3. ಒತ್ತಿರಿ or print text.

ಟಿಪ್ಪಣಿಗಳು:

• If you make an error, press the key to cancel all text and return the carrier to the tab stop. Then retype the text.
• ಒತ್ತಿರಿ key twice to cancel the centering mode.
• If the text is longer than the space between the tabs, it cannot be centered and a beep will sound.
• The carrier must be at the left tab position to use the tab-centering function.
• If no right tab has been set, the right margin will be used for centering.

Sample Printout

Indenting

To indent a line:
To indent at the beginning of a line, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿ. The carrier will move five spaces to the right of its present position.

Sample Printout

Typing flush right (Right Margin Flush)
This typewriter can automatically print text flush against the right margin. This is particularly useful with dates and other headings.

1. ಹಿಡಿದುಕೊಳ್ಳಿ ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key. The carrier will advance to the right margin.
2. Type the text. The carrier will backspace once for each character typed.
3. ಒತ್ತಿರಿ to print text.

Sample Printout 

ಟಿಪ್ಪಣಿಗಳು:

• If you make an error, press the key to cancel all text and return the carrier to the right margin. Then retype the text.
• ಒತ್ತಿರಿ key twice to cancel this mode and return the carrier to the position before mode activation.
• There must be a space between the text flush against the right margin and any other text on the line.

Superimposing characters
Some characters not found on your keyboard can be created with the following procedure. For example, to type the symbol for Japanese yen(¥):

1. Type the letter “Y”.
2. ಒತ್ತಿರಿ ಕೀ.
3. Type the symbol “".

Special character set
To type the special characters and symbols marked in green on the bottom of certain keys, hold down and press the desired key.

WORD SPELL

This Brother typewriter is equipped with a program called Word Spell, containing a 60,000-word main and approximately 190-word sub-dictionary. It compares words that you type with those in both dictionaries and sounds a beep for any that are not found in either of them. “The spelling programs contain materials owned; developed, and copyrighted by Houghton Mifflin Company, Boston, Massachusetts, U.S.A. Reproduction or disassembly of embodied computer programs or algorithms is prohibited. Based upon The American Heritage Dictionary.”

Turning on and off Word Spell

1. ಹಿಡಿದುಕೊಳ್ಳಿ ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key to turn on Word Spell. A red lamp lights beside WORD SPELL at the far left side of the keyboard.
2. To turn off Word Spell, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key again. The red lamp ಹೊರಗೆ ಹೋಗುತ್ತದೆ.

ಗಮನಿಸಿ:
When the power is turned off, the previous setting is protected for one week by the back-up battery, which is fully charged after one hour of use. This setting is automatically recalled when the power is turned on again.

Using Word Spell

1. Type the text. A beep sounds when the (space) bar is pressed for any word or combination of characters not contained in the main or sub-dictionaries.
2. ಒತ್ತುವುದು or key (except when a hyphen falls at the end of a line) also signals the end of a word and starts the spell check.

ಗಮನಿಸಿ:

• Word Spell has a one-line memory that allows you to recheck words that have been typed on the same line.
• To recheck, backspace to the desired position.
• The word to the immediate left is checked when you pass it using the (space) bar. Words from the present position to the next tab are checked when the key is pressed. Words from the present position to the end of the line are checked when the ಕೀಲಿಯನ್ನು ಒತ್ತಲಾಗುತ್ತದೆ.

Adding words to the sub-dictionary
When you first start using the Word Spell function, the sub-dictionary is empty. Approximately 190 words can be registered in the sub-dictionary (average length of 7 letters). If you add a word to this dictionary when it is full, the least frequently used word is automatically deleted.

1. To add a word to the user dictionary, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key after typing a space following the word you want to add.
2. A beep will sound to inform you the word has been added. If a beep does not sound, the word is already registered in the main or sub dictionary, or it cannot be registered due to length (words must be between 2 and 32 letters long).

ಗಮನಿಸಿ:
Any combination of letters and numbers or symbols can be registered in the sub-dictionary, but a series of numbers and symbols alone cannot be registered.

Deleting words from the sub-dictionary
Words can be deleted from the sub-dictionary to make room for new words.

1. To delete a word from the sub-dictionary, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key immediately after the word you want to delete has been checked (i.e., normally when the (space) bar is pressed after typing a word).
2. A beep will sound to inform you the word has been deleted. If a beep does not sound, the word is not registered in the sub-dictionary.

Printing a list of words in the sub-dictionary
A list of words in the sub-dictionary can be printed in alphabetical order for your reference.

1. To print this list, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ.
2. A notation as to the number of words in the sub-dictionary (e.g. “NUMBER OF WORDS 25”) is printed on the first line. The words are printed in alphabetical order from the second line on, using the present margins.
3. To temporarily stop the printout, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key. The SHIFT LOCK lamp flashes while the printout is stopped. Hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key again to restart the printout.
4. To cancel the printout function, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ.

ಗಮನಿಸಿ:
To delete all words from the sub-dictionary, turn on the power while holding down the ಕೀ ಮತ್ತು ಕೀ.

ನೆನಪಿನ ಕಾರ್ಯಗಳು

This state-of-the-art Brother typewriter has a memory of approximately 5,000 characters, enabling you to print phrases and entire letters as many times as desired without retyping them.

Storing text in memory

1. To activate the store mode, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ. ದಿ key light will flash for several seconds.
2. Type the desired text. The key light will flash for several seconds each time the ಕೀಲಿಯನ್ನು ಒತ್ತಲಾಗುತ್ತದೆ.
3. Margins, tabs, and pitch sets before store mode activation are used and cannot be changed.
4. When the text has been typed, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key. The text is now stored in the memory.

ಟಿಪ್ಪಣಿಗಳು:

• ಒಮ್ಮೆ ನೀವು ಒತ್ತಿದರೆ key to advance to the next line of text, printed text on the previous line cannot be corrected. Therefore, make sure that the text typed on each line is correct before pressing the ಕೀ.
• This typewriter has only one memory. The text stored within the memory cannot be corrected. If you wish to correct any text stored in the memory, you must erase the entire memory.
• A buzzer sounds if the memory has reached capacity, and further entry becomes impossible.

Printing text from memory

1. ಹಿಡಿದುಕೊಳ್ಳಿ ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ.
2. The carrier will return to the left margin (set when the store mode was originally activated) and printing will start. (The margin, tab, and pitch settings effective when the memory was stored are used.)
3. To temporarily stop printing, press the (space bar. Printing stops after the present line. Hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key to restart printing.
4. ಹಿಡಿದುಕೊಳ್ಳಿ ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key to cancel printing.
5. The typewriter returns to its previous margin, tab, and pitch settings when printing is completed.

Adding text to memory
This function enables you to add text to the memory. (Stored text cannot be changed.)

1. ಹಿಡಿದುಕೊಳ್ಳಿ ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ.
2. Type the desired text. The margin, tab, and pitch settings are effective when the text memory that was originally stored is used.
3. When the text has been entered, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ.
   The text is now stored in the memory and is added to the existing memory when it is printed.

ಮೆಮೊರಿಯನ್ನು ಅಳಿಸಲಾಗುತ್ತಿದೆ

1. To delete the memory, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ.
2. Then hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ key. This erases all memory and activates the store mode, enabling you to store new text. (If you do not wish to store text in the memory at this time, hold down the ಕೀ ಮತ್ತು ಒತ್ತಿರಿ ಕೀ.)

REPLACING THE RIBBON, ETC

ಕ್ಯಾಸೆಟ್ ರಿಬ್ಬನ್ ಅನ್ನು ಬದಲಾಯಿಸುವುದು
Two types of ribbons are available for use with this Brother typewriter, correctable film ribbon and nylon ribbon.

ಕ್ಯಾಸೆಟ್ ರಿಬ್ಬನ್ ಅನ್ನು ಬದಲಿಸಲು:

1. Move the carrier to the center of the platen.
2. ಮೇಲಿನ ಕವರ್ ತೆರೆಯಿರಿ.
3. ಕ್ಯಾಸೆಟ್ ಅನ್ನು ಎರಡೂ ಕೈಗಳಿಂದ ಹಿಡಿದುಕೊಂಡು, ಕ್ಯಾಸೆಟ್‌ನ ಮುಂಭಾಗವನ್ನು ಮೇಲಕ್ಕೆ ಮತ್ತು ಹೊರಕ್ಕೆ ಎತ್ತಿ.
4. ಅದನ್ನು ತೆಗೆದುಹಾಕಲು ಕ್ಯಾಸೆಟ್ ಅನ್ನು ಪ್ಲೇಟನ್ ಕಡೆಗೆ ಸರಿಸಿ.
5. Turn the feed knob (on the left side of the cassette) counter-clockwise to tighten the ribbon in the new cassette.
6. Aligning the arrow on the cassette with the arrow on the cassette holder, use both hands to ease the cassette into the holder, back first.
7. Gently press down on the front of the cassette until it clicks into place.
8. ಯಾವುದೇ ಸ್ಲಾಕ್ ಅನ್ನು ತೆಗೆದುಕೊಳ್ಳಲು ಫೀಡ್ ನಾಬ್ ಅನ್ನು ಅಪ್ರದಕ್ಷಿಣಾಕಾರವಾಗಿ ತಿರುಗಿಸಿ.
9. ಕವರ್ ಮುಚ್ಚಿ.

ಟಿಪ್ಪಣಿಗಳು:

• ಉಳಿದಿರುವ ಟೇಪ್ ಪ್ರಮಾಣವನ್ನು ಮೂಲಕ ಪರಿಶೀಲಿಸಬಹುದು viewing hole on the right side of the cassette.
• Make sure to use only Brother-authorized cassette ribbons, daisy wheels, and correction tapes. Brother cannot be responsible for the trouble caused by the use of unauthorized supplies.

ತಿದ್ದುಪಡಿ ಟೇಪ್ ಅನ್ನು ಬದಲಾಯಿಸುವುದು

• Two types of correction tape are available for use with this Brother typewriter Lift-off correction tape, to be used with correctable film ribbon.
• Cover-up correction tape, to be used with nylon ribbon.

ತಿದ್ದುಪಡಿ ಟೇಪ್ ಅನ್ನು ಬದಲಿಸಲು:

1. Move the carrier to the center of the platen.
2. ಮೇಲಿನ ಕವರ್ ತೆರೆಯಿರಿ.
3. Remove the cassette ribbon, if installed.
4. Pull off both spools, pressing against the correction tape with your thumbs. Bring it back to a position parallel with the platen, and lift it up and out.
5. ಹೊಸ ಟೇಪ್ ಅನ್ನು ಎಡ ಮಾರ್ಗದರ್ಶಿಯ ಮೂಲಕ, ರಿಬ್ಬನ್ ಮಾರ್ಗದರ್ಶಿಯ ಹಿಂದೆ ಮತ್ತು ಬಲ ಮಾರ್ಗದರ್ಶಿಯ ಮೂಲಕ ಹಾದುಹೋಗಿರಿ. ಟೇಪ್ನ ಒರಟು (ಜಿಗುಟಾದ) ಬದಿಯು ಪ್ಲಾಟೆನ್ ಅನ್ನು ಎದುರಿಸಬೇಕು.
6. ಎಡಭಾಗದಲ್ಲಿರುವ ಪಿನ್‌ಗೆ ಫೀಡರ್ ಸ್ಪೂಲ್ ಅನ್ನು ಲಗತ್ತಿಸಿ.
7. ಟೇಕ್-ಅಪ್ ಸ್ಪೂಲ್ ಅನ್ನು ಬಲಭಾಗದಲ್ಲಿರುವ ಪಿನ್‌ಗೆ ಲಗತ್ತಿಸಿ.
8. Turn the take-up spool counter-clockwise until a small amount of white tape has wound around it.
9. Replace the cassette ribbon and close the cover.

ಕ್ಯಾಸೆಟ್ ಡೈಸಿ ಚಕ್ರವನ್ನು ಬದಲಾಯಿಸುವುದು
ಡೈಸಿ ಚಕ್ರವನ್ನು ಸುಲಭ, ಹಾನಿ-ಮುಕ್ತ ನಿರ್ವಹಣೆ ಮತ್ತು ತ್ವರಿತ ಟೈಪ್‌ಫೇಸ್ ಬದಲಾವಣೆಗಳಿಗಾಗಿ ಸ್ಪಷ್ಟವಾದ ಪ್ಲಾಸ್ಟಿಕ್ ಕ್ಯಾಸೆಟ್‌ನಲ್ಲಿ ಇರಿಸಲಾಗಿದೆ.

ಕ್ಯಾಸೆಟ್ ಡೈಸಿ ಚಕ್ರವನ್ನು ಬದಲಿಸಲು:

1. ಮೇಲಿನ ಕವರ್ ತೆರೆಯಿರಿ.
2. Pull the green lever towards you to release the daisy wheel lock.
3. Remove the cassette daisy wheel by pulling it out of the machine by the protruding “ear” on the top right.
4. Insert the desired cassette daisy wheel into the slot and press down gently.
5. Slide the green lever back to its original position to lock the cassette daisy wheel in place.
   Make sure to press the lever firmly until a clicking sound is heard.
6. ಕವರ್ ಮುಚ್ಚಿ.

ಟಿಪ್ಪಣಿಗಳು:

• Make sure the cassette daisy wheel is not inserted backward. The “ear” should always be on the upper right.
• If the cassette daisy wheel is not inserted properly, characters will not be printed correctly.
• ಡೈಸಿ ಚಕ್ರವನ್ನು ಬದಲಾಯಿಸುವಾಗ ಕ್ಯಾಸೆಟ್ ರಿಬ್ಬನ್ ಅನ್ನು ತೆಗೆದುಹಾಕುವುದು ಅನಿವಾರ್ಯವಲ್ಲ.

ದೋಷನಿವಾರಣೆ

ಸಮಸ್ಯೆ

• ಪವರ್ ಸ್ವಿಚ್ ಆನ್ ಮಾಡಿದಾಗ ಏನೂ ಆಗುವುದಿಲ್ಲ
  1. ಪವರ್ ಕಾರ್ಡ್ ಪ್ಲಗ್ ಇನ್ ಆಗಿದೆಯೇ?
  2. Is the top cover closed?
• Poor printing performance
  1. Is the daisy wheel properly installed? (Has the green lever been pressed firmly?)
  2. Is the cassette ribbon properly positioned?
  3. ನಿಮ್ಮ ರಿಬ್ಬನ್ ಮುಗಿದಿದೆಯೇ?
• ಕಳಪೆ ತಿದ್ದುಪಡಿ ಕಾರ್ಯಕ್ಷಮತೆ
  1. ತಿದ್ದುಪಡಿ ಟೇಪ್ ಅನ್ನು ಸರಿಯಾಗಿ ಸ್ಥಾಪಿಸಲಾಗಿದೆಯೇ?
  2. ನೀವು ತಿದ್ದುಪಡಿ ಟೇಪ್ ಖಾಲಿಯಾಗಿದೆಯೇ?
  3. ನೀವು ಸರಿಯಾದ ತಿದ್ದುಪಡಿ ಟೇಪ್ ಅನ್ನು ಬಳಸುತ್ತಿರುವಿರಾ?
• The cassette ribbon remains in the “lifted” position
  1. Turn the power off. Then turn it on again while holding down the key and the pitch selector.
• Cannot enter store mode
  1. Are the centering or right margin flush functions activated?
  2. Has the store mode been deactivated? (Deactivate by holding down the key and pressing the ಕೀ.)

CARE OF UNIT

1. Take precautions to prevent the entry of foreign matter into the typewriter or between the keys. Be especially careful of metal objects such as paper clips and staples.
2. Never use volatile liquids such as thinner or benzene to clean the exterior surface of the typewriter. Use only a soft cloth dampಸೌಮ್ಯವಾದ ಮಾರ್ಜಕ ದ್ರಾವಣದೊಂದಿಗೆ ಸೇರಿಸಲಾಗುತ್ತದೆ.
3. Do not place your typewriter where it may be ex­posed to direct sunlight, heat, or intense vibration.
4. Be careful not to block the ventilation slits provided at the back of the unit to prevent the possibility of overheating.
5. Be sure to replace the lid cover when the typewriter is not in use.

ವಿವಿಧ

ಸರಬರಾಜು
Obtain cassette ribbons, correction tape, and cassette daisy wheels from your nearest authorized dealer. Brother cannot be responsible for the trouble caused by the use of unauthorized supplies.

Daisy wheel sampಕಡಿಮೆ

ಗಮನಿಸಿ: “1012” indicates that the same daisy wheel can be used for both Pica and Elite.

ವಿಶೇಷಣಗಳು

• Paper capacity 304.8 mm (12.0″)
• Typing capacity 228.6 mm (9.0″)
• Typing speed 10 cps
• Typing pitches 10, 12
• Number of character keys 46
• Line spacing 0, 1, 1.5, 2
• Ribbons Correctable film & Nylon
• Correction tapes Lift-off & Cover-up
• ಆಯಾಮಗಳು
  • 414.3(W) x 360(0) x 135(H) mm
  • 16.3″(W) X 14. 2″(0) X 5.3″(H)
• Weight 5.6 kg/12.4 lb.s

ತ್ವರಿತ ಉಲ್ಲೇಖ

ಎಲ್ಲಿ ದಿ key is followed by a ” + “, hold it down while pressing the other key.

ಪರಿಕರ ಆದೇಶ ಫಾರ್ಮ್

ಆತ್ಮೀಯ ಗ್ರಾಹಕ:
Please use this order form when ordering accessories for your typewriter. All prices include shipping and handling charges.

ಸ್ಟಾರ್ಟರ್ ಕಿಟ್

Cassette ribbons/correction tapes 

Cassette daisy wheels 

The above pricing is subject to change without notice. For any further information on these accessory items, call toll-free 800-526-3537.

ದಾಖಲೆಗಳು / ಸಂಪನ್ಮೂಲಗಳು

brother AX-20 Electronic Typewriter [ಪಿಡಿಎಫ್] ಬಳಕೆದಾರರ ಕೈಪಿಡಿ AX-20, AX-20 Electronic Typewriter, AX-20, Electronic Typewriter, Typewriter

ಉಲ್ಲೇಖಗಳು

• ಬಳಕೆದಾರ ಕೈಪಿಡಿ