MSC MOTO RM3 સ્ટીયરીંગ ડીamper ઇન્સ્ટોલેશન માર્ગદર્શિકા
We appreciate your support and hope you enjoy your ride more than ever after this installing our products!
If you have any questions regarding the fitment or function of this product please call or message us 02 43741655 or info@mscmoto.com
MSC Products Australia does recommend this installation be completed by a competent mechanically minded person with the correct tools and equipment. Incorrect installation of after market parts to motorcycles can result in a product under performing, damaging the motorcycle or be harmful to the rider. Please take care when working on your motorcycle.
WHAT IS NEEDED FOR THIS INSTALLATION:
QUALITY TOOLS:
Socket Set, Allen Key set, Pliers, Zip Ties
Tidy Work Area, Secure stand or work bench for motorcycle Owners manual – Refer to owners manual for torque settings etc
RM3 DAMPER ADJUSTMENT DETAILS
20 clicks of adjustment on main dial;
નરમ – Anti-clockwise
કઠણ - ઘડિયાળની દિશામાં
It may take a few rides to work out your desired dampening depending on your style or conditions you ride in. Start your first ride with dials set in the middle, if you want more or less damping adjust the dial is the direction you need a few clicks at a time.
મહેરબાની કરીને નોંધ કરો:
Once dial has stopped clicking/turning, the damper has reached the end of adjustment range. Please do not attempt to turn the dial any more, doing this will damage the Damper
કેવી રીતે ઇન્સ્ટોલ કરવું:
Start with putting the bike on a secure stand and getting some containers to place the small screws you need to remove.
પ્રો ટીપ: We also recommend that you also take some photos to help remember where everything goes!
- Start with removing your handlebars and the bar mounts from the top triple clamp, along with OEM steering damper and mounting hardware.
- Install supplied pin post by attaching to the Ducati’s OEM steering damper mounting position, between petrol tank and top triple clamp.
- Position MSC damper mount bracket on top of the triple clamp. PLEASE NOTE: Do not lose 2x washers that sit between bracket and rubber mounts.
- Place the steering damper onto the bracket and secure using supplied M6x16 bolts. Ensure linkage arm locates on post pin.
- Re-install handlebar mounts and handlebars to preffered position.
Now the RM3 kit is installed to the bike, check the cables, wires and hoses are all correctly routed and not in the wrong location. Slowly move the bars left to right to check there is not any issues.
Check all bolts are tight and you are satisfied that everything is correct prior to riding your motorcycle.
See following page for reference photos.
INSTALL REFERENCE IMAGES
WHAT YOUR STEERING DAMPER KIT CONTAINS
+61 2 4374 1655
દસ્તાવેજો / સંસાધનો
| MSC MOTO RM3 સ્ટીયરીંગ ડીamper [pdf] સ્થાપન માર્ગદર્શિકા RM3 સ્ટીયરીંગ ડીamper, RM3, Steering Dampએર, ડીamper |