સૂચના માર્ગદર્શિકા
KTF-1 (1-family variant)
KTF-2 (2-family variant)
KTF-3 (3-family variant)
Thank you for purchasing this doorbell button. Please read the user manual carefully and keep it for future reference. This doorbell button is designed for wired doorbell systems and provides a potential-free switching contact for each family.
When connected to a power supply, the nameplate illumination automatically turns on in darkness and off in brightness.
પેકેજ સામગ્રી
KTF-1
1-family wireless doorbell button Mounting materials
ઓપરેશન અને ઇન્સ્ટોલેશન મેન્યુઅલ
KTF-2
2-family wireless doorbell button Mounting materials
ઓપરેશન અને ઇન્સ્ટોલેશન મેન્યુઅલ
KTF-3
3-family wireless doorbell button Mounting materials
ઓપરેશન અને ઇન્સ્ટોલેશન મેન્યુઅલ
દંતકથા
- Doorbell button (KTF-3 is illustrated)
- તેજ સેન્સર
- Nameplate(s)
- હાઉસિંગ સ્ક્રૂ
- માઉન્ટ કરવાનું છિદ્રો
- Doorbell button on the circuit board
- કનેક્શન ટર્મિનલ્સ
- નેમપ્લેટ રોશની
- કેબલ એન્ટ્રી
ઇન્સ્ટોલેશન
નોંધ: The installation location should be as flat as possible to avoid warping the housing during installation. If an external power supply is used, the connection wires should be centrally located in the lower third behind the doorbell button.
હાઉસિંગ ખોલવું
Open the doorbell button by unscrewing the housing screws (4) with a suitable screwdriver (Torx T10) and then carefully lifting the front housing. Be careful not to let the nameplate(s) fall out. Place the front housing and the silicone seal with the nameplate(s) aside to avoid damage during further installation.
માઉન્ટ કરવાનું
You can use the rear housing as a drilling template. Align it at the installation location using a spirit level and mark the drill holes with a suitable pen. Drill holes at the marked locations in the wall using a 6mm masonry drill bit and insert one of the supplied dowels into each hole.
નોંધ: If you are not mounting the doorbell button on a stone wall, use appropriate alternative mounting materials (not included).
Thread the connection cable from the back through the cable entry points (9) into the housing. Use the supplied screws to attach the rear housing to the wall.
હાઉસિંગ બંધ
Place the silicone seal with the nameplate(s) in the front housing and assemble both onto the mounted rear housing. Screw both housing parts together with the housing screws.
This doorbell button provides a potential-free contact for each family to connect a door chime. On the following pages, you will find example connection diagrams for the respective models.
Example connection diagrams for KTF-1 (chime with battery):
This doorbell button is equipped with automatic nameplate illumination, which turns on in darkness and turns off in brightness.
નોંધ: If no power supply is connected, the doorbell button can still be used, only the nameplate illumination will be non-functional.
REPLACING THE LABELLING FIELD
The labelling field can be easily replaced. As shown in Fig. 1, carefully position a suitable flathead screwdriver at the side of the nameplate and gently pry it forward without damaging the housing. Underneath is the labelling field, which can now be easily replaced.
DIMENSIONS FOR THE LABELLING FIELD
- KTF-1: 52mm x 57mm
- KTF-2: 52mm x 27mm (2x)
- KTF-3: 52mm x 17mm (3x)
ટેકનિકલ ડેટા
- સંચાલન ભાગtage: 8-12V AC અથવા DC
- વીજ વપરાશ: <1 ડબ્લ્યુ
- Contact load capacity: max. 1A
- રક્ષણ વર્ગ: IP44
- તાપમાન શ્રેણી: -20°C થી +55°C
નોંધો
Under the influence of strong static, electric, or high-frequency fields (discharges, mobile or cell phones, radio systems, microwaves), malfunctions may occur.
સફાઈ અને જાળવણી
હાઉસિંગની સપાટીને સાબુવાળા પાણીથી ભેજવાળા નરમ કપડાથી સાફ કરી શકાય છે. ઘર્ષક ક્લીનર્સ અથવા રસાયણોનો ઉપયોગ કરશો નહીં.
સલામતી સૂચનાઓ
We do not assume liability for property or personal damage caused by improper handling or failure to observe safety instructions. In such cases, any warranty claim is void!
For safety and approval reasons (CE), unauthorized modification and/or alteration of the product is not allowed.
Do not leave packaging materials lying around; plastic films/bags, Styrofoam parts, etc., could become hazardous toys for children.
Consult a professional if you have doubts about the operation, safety, or connection of the device.
Handle the product with care – it can be damaged by impacts, blows, or falls from even a low height.
વોરંટી માહિતી
For a period of 2 years from the date of purchase, we guarantee that this product is free from defects in materials and workmanship. This applies only if the device is used in a normal manner and regularly maintained. The obligations of this warranty are limited to the repair or replacement of any part of the device and apply only on the condition that no unauthorized changes or attempted repairs have been made. Your legal rights as a customer are not affected in any way by this warranty.
મહેરબાની કરીને નોંધ કરો!
નીચેના કેસોમાં, અન્યમાં કોઈ વોરંટીનો દાવો નથી:
- ઓપરેટિંગ ભૂલો
- Interference from other radio systems (e.g., mobile phone operation)
- External interventions/effects
- યાંત્રિક નુકસાન
- ભેજને નુકસાન
- No warranty proof (purchase receipt)
The warranty claim is void for damage caused by not following this user manual. We do not assume liability for consequential damages! We do not assume liability for property or personal damage caused by improper handling or failure to observe safety instructions. In such cases, any warranty claim is void!
The manufacturer is not liable for the loss or damage of any kind, including incidental or consequential damages, directly or indirectly resulting from the malfunction of this product.
This instruction manual is a publication of m-e GmbH modern-electronics
એન ડેન કોલોનાટેન 37
26160 ખરાબ Zwischenahn
જર્મની
The user manual corresponds to the technical status at the time of printing.
Changes in technology and equipment are reserved.
ME-GMBH
આધુનિક-ઈલેક્ટ્રોનિક્સ
એન ડેન કોલોનાટેન 37
D-26160 BAD ZWISCHENAHN જર્મની
WWW.ME.DE
Hiermit erklärt die me GmbH આધુનિક-ઇલેક્ટ્રોનિક્સ, dass dieses
Gerät den folgenden Richtlinien entspricht:
RoHS 2011/65/EU
EMC 2014/30/EU
એલવીડી 2014/35 / ઇયુ
Die KONFORMITÄTSERKLÄRUNG kann
unter folgender Adresse abgerufen werden:
http://www.m-e.de/download/ce/ktf-1-3ce.pdf
દસ્તાવેજો / સંસાધનો
| m-e KTF-3 Wireless Doorbell Buttons [pdf] સૂચના માર્ગદર્શિકા KTF-1, KTF-2, KTF-3, KTF-3 Wireless Doorbell Buttons, KTF-3, Wireless Doorbell Buttons, Doorbell Buttons, Buttons |