anyfree MLZJ01-M Smart Video Doorbell User Guide

anyfree MLZJ01-M Smart Video Doorbell

Product Information

Specifications

• Model: anyfree-MLZJ01-M
• Type: Smart Doorbell
• Weight: 105g
• Thickness: 0.5mm
• Model Number: TC-U9ML-A–001
• Part Number: TC-QI-YF-0005
• Version: V11/MM
• Ratio: 1:1
• Manufacturing Date: 2024.9.24
• Batch Number: A-04

Product Usage Instructions

Installation

1. Choose a suitable location near your front door for installation.
2. Mount the smart doorbell securely using the provided screws and anchors.
3. Connect the device to your home Wi-Fi network following the app instructions.

Operation

To use the smart doorbell

• Ensure the device is connected to power and Wi-Fi.
• Download and install the companion app on your smartphone.
• Set up notifications and alerts within the app for incoming visitors.
• You can now see, hear, and communicate with visitors through the app.

Maintenance
To keep the device in optimal condition

• Regularly check for software updates for improved performance.
•  Clean the camera lens and speaker/microphone area.
•  Ensure the device is protected from extreme.

Frequently Asked Questions (FAQ)

Q: How do I reset the smart doorbell?
A: To reset the smart doorbell, press and hold the reset button for 10 seconds until you hear a beep, then follow the setup process again.

 Set up your Video Doorbell

1. Download the Hello Doorbell app
   *Please make sure you have your wifi password ready for the next step.
   Search for “Hello Doorbell” in one of the app stores above, or scan the QR code on the back of the doorbell to download the app.
2. Chrage the doorbell
   Pull down the mounting bracket of the doorbell, find the charging port.Plug the TYPE-C power cord into the doorbell to charge before installation. It must be fully charged before installing the doorbell.
3. Turn on the doorbell
   The doorbell is off by default at the factory. Please make sure to turn on the doorbell before setting up.
4. Plug-in your signal station
   Plug it into the power source. Once the light is solid red, it’s ready to prepare your doorbell.
5. Set up your Video
   Doorbell near your signal station Long press the side on the signal station. When the light starts flashing green, connecting the device via Wifihalow.

We provide two connection methods:

Bluetooth connection

• Turn on the Bluetooth in phone system setting
• Searching for anyfree signal station and connect

Install your Video

Doorbell Set installation height

*Optional: If replacing an existing doorbell shut off power at the breaker.

1. Then remove it from the wall and disconnect the wires. Install your Video Doorbell approxi- mately five feet (1.50 meters) above the ground for optimal performance. If you’re connecting to existing doorbell wiring that’s higher than four feet and want to angle your Video Doorbell down for a better view, you can purchase a Wedge Kit online at anyfree.com/accessories
2. Mark the screw holes
   Use the bracket as a template to mark the holes. The recommended install height is 5 feet above the ground. The holes are 105.5 mm apart.
3. Attach your Video Doorbell to the mounting bracket
   Mount the doorbell above the hanging plate by 5-10mm, align it horizontally, stick it securely, slide it downwards, and hang it tightly.Use the star-shaped end of the included screwdriver to drive the two security screws into the bottom of your Video Doorbell.
   If you use the wrong screws to secure the Video Doorbell, you could damage the battery during installation, create a fire hazard, and be seriously injured.
4. Install the anchor(Optional)
   If installing on stucco, brick, or concrete, use a M6 masonry drill bit to drill holes in your wall, then insert the included anchors with KA3*30 screw. The holes are 86.5 mm apart.
   *If you’re installing on wood material, skip this step.
5. Attach the anchor to the mounting bracket
   Attach the mouting bracket to the anchor using KM3*10 screws, then follow the instructions from step 02.4.

Products & Accessories

1. Feature Introduction
   No need to charge The doorbell operates on solar energy, eliminating the need for recharging.
2. Ignore distance in open areas
   The doorbell can transmit signals over a distance of more than with the help of WiFl -Halow technology.
3. AR interaction
   During a video call with visitors, you can use AR effects by waving your hand and take photos to capture the moment. Keep in mind that different festivals may offer different special filters. Stay tuned for more updates!
4. Motion detection
   To set up the doorbell, click on the detection environment to initialize the millimeter wave radar monitoring. Once the monitoring is done, you’ll receive a prompt and the millimeter wave radar will monitor your doorstep in real-time.
5. Customized ringtone
   You can create and customize unique ringtones in the app.
6. Video message
   Visitors can record video messages for you in case the doorbell call fails. Video Mail will start automatically with a voice prompt.

FCC WARNING

This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The rating information is located at the bottom of the unit. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your  body.

UK REP

• EU&MJCM LTD
• Suite813, 162WarwickWay
• London,SW1V4JE,GB

EC REP

• MJCM SARL
• 78 avenue des Champs-Elysees Bureau 326 mjcm190928@gmaiI.com

This device contains licence-exempt transmitters)/receivers) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device

“This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.”

Documents / Resources

anyfree MLZJ01-M Smart Video Doorbell [pdf] User Guide MLZJ01-M, MLZJ01-M Smart Video Doorbell, Smart Video Doorbell, Video Doorbell, Doorbell

References

• User Manual