User Manual
V3000 Tilt Bracket
V3000 Tilt bracket (N000045L002A)
The tilt bracket (as shown in Figure 22) is used to provide elevation adjustment when a V3000 CN or V5000 DN is mounted on a pole. The tilt bracket works with poles with diameters in the range of 25 mm to 75 mm (1 inch to 3 inches).
The tilt bracket assembly may be used with third-party band clamps to mount the ODU on a larger pole (the diameter range depends on the clamps used).
Figure 22: Tilt bracket assembly
V5000 Pole mount (C000000L137A)
The pole mount (as shown in Figure 23) is used to mount a V5000 DN on a vertical pole with a diameter in the range of 25 mm to 75 mm (1 inch to 3 inches. It provides coarse azimuth (but not elevation)
adjustment. Band clamps can be used for V5000 pole mount to accommodate the larger diameter poles.
Figure 23: Pole mount
V5000 Wall mount (C000000L136A)
The wall mount (Wall mount figure below) is used to mount a V5000 DN on a vertical wall. It does not provide azimuth or elevation adjustment. The wall mount requires additional fixing hardware suitable for the type of wall.
Figure 24: Wall mount
Bracket part numbers
Order mounting brackets by using the Cambium part numbers listed in below table.
Table 8: Radio mounting bracket part numbers
| Bracket | Radio nodes | Cambium Part Number |
| Adjustable pole mount | V1000 | N000900L022A |
| Tilt bracket assembly | V3000 | N000045L002A |
| Wall mount bracket | V5000 | C000000L136A |
| Pole mount bracket | V5000 | C000000L137A |
| Precision bracket | V3000 | C000000L125A |
Radio accessories
Telescope mounting kit for precision brackets
An alignment telescope provides the most accurate option for the alignment of the precision bracket during installation. The telescope is temporarily mounted on the bracket using the telescope mounting kit for precision brackets.
The telescope mounting kit consists of a mounting plate, a knurled screw, and two rubber O-rings. Order the telescope mounting kit from Cambium Networks.
Figure 25: Telescope mounting kit
Order a suitable telescope from a specialist supplier specifying the following details:
Right angle, erecting, 9×50 mm alignment scope with 5° field of view
Figure 26: Typical alignment telescope
Alignment Tube
The Alignment tube (as shown in Figure 27) is designed to be used with V3000 when setting up a PointtoPoint link. It is Ideal for aligning a Point-to-Point link that spans up to 600 m.
Figure 27: Alignment Tube
For longer links up to 3 km, Cambium Networks suggests to use the telescopic mounting kit (C000000L139) and a finder scope.
Note
For details on how to fit the Alignment tube for V3000, refer to Fixing the alignment tube.
Radio accessory part numbers
Order radio accessories using the Cambium Part Number in the Radio accessory part numbers table below.
Table 9: Radio accessory part numbers
| Accessory | Radio nodes | Cambium Part Number |
| Telescope mounting kit | V3000 | C000000L139A |
| Alignment Tube | V3000 | C000000L190A |
Radio external interfaces
V1000 CN
Figure 28: External interfaces for V1000 CN
Table 10: External interfaces V1000 CN
| Port name | Connector | Interface | Description |
| PSU | RJ45 | PoE input | Standard 802.3af/at PoE |
| 100/1000 BASE-T Ethernet | Data and management |
V2000 CN
Figure 29: External interfaces for V2000 CN
Table 11: External interfaces – V2000 CN
| Port name | Connector | Interface | Description |
| :DSJ | :-:J :b | POE Input | Passive POE |
| 100m/1000m/2.5G BASE-T Ethernet | Data and management | ||
| Aux | RJ45 | POE Output | Standard IEEE 802.3at POE |
| 100m/1000m/2.5G BASE-T Ethernet | Data and management |
V3000 CN
Figure 30: External interfaces for V3000 CN
Table 12: External interfaces V3000 CN
| Port name | Connector | Interface | Description |
| SFP+ | SFP | 10G BASE-SR/10G BASE-LR/1G Base-SX using optional SFP+/SFP optical or copper module SFP-1G-SX / SFP-1G-LX using optional SFP optical or copper module |
Data and management |
| PSU | RJ45 | PoE input | Passive PoE |
| 100m/1000m/2.5G BASE-T/5G BASE-T/ 10G BASE-T Ethernet | Data and management | ||
| AUX | RJ45 | PoE output | Standard IEEE 802.3af/at |
| 100/1000 BASE-T Ethernet | Data and management |
V5000 DN
Figure 31: External interfaces for V5000 DN
Table 13: External interfaces V5000 DN
| Port name | Connector | Interface | Description |
| SFP+ | SFP | 10G BASE-SR/10G BASE-LR/1G Base-SX using optional SFP+/SFP optical or copper module SFP-1G-SX / SFP-1G-LX using optional SFP optical or copper module |
Data and management |
| PSU | RJ45 | PoE input | Passive PoE |
| 100m/1000m/2.5G BASE-T/5G BASE-T/ 10G BASE-T Ethernet | Data and management | ||
| AUX | RJ45 | PoE output | Standard IEEE 802.3af/at |
| 100/1000 BASE-T Ethernet | Data and management |
Radio specifications
The 60 GHz cnWave Radios conform to the specifications listed in Radio node specifications.
Table 14: Radio node specifications
| Category | Specification | |
| Dimensions | V1000 Client Node | 169 mm × 100 mm × 54 mm (6.6 in × 3.9 in × 2.1 in) |
| V2000 Client Node | 250 mm x 200 mm x 300 mm (9.9 in x 7.9 in x 11.8 in) | |
| V3000 Client Node (44.5 dBi) V3000 Client Node (40.5 dBi) |
421 mm x 347 mm x 349 mm (16.5 in x 13.6 in x 13.7 in) 343 mm x 198 mm x 251 mm (13.5 in x 7.7 in x 9.8 in) |
|
| V5000 Distribution Node | 280 mm x 186 mm x 103 mm (11.0 in x 7.3 in x 4.0 in) | |
| Weight | V1000 Client Node | 0.46 kg (1.01 Ibs) |
| V2000 Client Node | 2.7 kg (5.95 Ibs) | |
| V3000 Client Node (44.5 dBi) | 4.17 kg (9.1 Ibs) including big antenna dish 6.12 kg (13.4 Ibs) = radio with dish + precision bracket |
|
| V3000 Client Node (40.5 dBi) | 3.2 kg (7.05 Ibs) including small antenna dish 5.15 kg (11.3 Ibs) = radio with dish + precision bracket |
|
| V5000 Distribution Node | 3.12 kg (6.8 Ibs) including antenna dish 3.76 kg (8.2 Ibs) = radio with dish + universal pole bracket |
|
| Temperature | -40°C (-40°F) to +60°C (140°F) | |
| Wind survival | 200 kph (124 mph) maximum | |
| Humidity | 100% condensing | |
| Liquid and particle ingress | IP66, IP67 | |
| Power consumption | V1000 Client Node | 10 W |
| V2000 Client Node | 30W, up to 60W with POE Out enabled | |
| V3000 Client Node | 30 W, up to 60 W with PoE Out enabled | |
| V5000 Distribution Node | 35 W, up to 65 W with PoE Out enabled | |
| Power input interface | V1000 Client Node | IEEE 802.3af |
| V2000 Client Node | Passive POE | |
| V3000 Client Node | Passive PoE | |
| V5000 Distribution Node | Passive PoE | |
| Power output interface | V2000 Client Node | IEEE 802.3af/at, 25W maximum |
| V3000 Client Node | IEEE802.3af/at, 25 W maximum | |
| V5000 Distribution Node | IEEE 802.3af/at, 25 W maximum | |
Theory of operation
The 60 GHz cnWave devices support Facebook connectivity technology called Terragraph. cnWave devices implement IEEE 802.11ay WLAN standard and use 60GHz frequency band for wider spectrum and higher capacity. cnWave devices can provide multi-gigabit throughput from 100 M to 1.5 KM.
Deployment of the devices uses Open/R based layer3/IPv6 mesh for efficient distribution of traffic between the nodes and higher availability of the traffic. This also overcomes non-line of sight issues.
Devices use TDMA/TDD technology to achieve density deployment efficiency. Network and the nodes are configured, controlled, and monitored by a cloud-based E2E Controller.
Following terminologies are used for the network deployment:
- Distribution Node (DN) – DN connects with other DN for mesh network
- Client Node (CN) – CN connects to DN to provide high-speed connectivity
- PoP – DN connected to the back-haul
- CPE – Customer premises equipment devices like Wi-Fi router
Figure 32: Deployment scenario
Power supply units (PSU)
PSU Options
Order PSUs from Cambium Networks. The power supply component and the part numbers are described in the following table.
Table 15: Power supply component part numbers
| Product description | Radio node | Cambium part number |
| Outdoor AC/DC PSU, 100W, 54V DC | V3000 and V5000 | N000000L179B |
| Waterproof PSU Cable Joiner 14-16 AWG | V3000 and V5000 | N000000L180A |
| DC to RJ45 Plug Power Adaptor | V3000 and V5000 | C000000L184A |
| Cable Gland, Long, M25, Qty 5 | V3000 and V5000 | C000000L124A |
| PoE, 60W, 56V, 5GbE DC Injector, Indoor, Energy Level 6 Supply | V2000, V3000, and V5000 | N000000L142A |
| PoE, 60W, 56V, 10GbE DC Injector, Indoor, Energy Level 6 Supply | V2000, V3000, and V5000 | C000000L141A |
| PoE, 30W, 56V, 5GbE DC Injector, Indoor, Energy Level 6 Supply | V1000 and V2000 | N000000L034B |
| PoE Gigabit DC Injector,15W Output at 56V, Energy Level 6, OC to 50C | V1000 | N000900L017A |
| AC power Injector 56V, 60W | V3000 and V5000 | N000065L001C |
| CABLE, UL POWER SUPPLY CORD SET, 720mm, AUS/NZ | V1000, V2000, V3000, and V5000 | N000900L011A |
| CABLE, UL POWER SUPPLY CORD SET, INDIA | V1000, V2000, V3000, and V5000 | N000900L012A |
| CABLE, UL POWER SUPPLY CORD SET, ARGENTINA | V1000, V2000, V3000, and V5000 | N000900L013A |
| CABLE, UL POWER SUPPLY CORD SET, CHINA | V1000, V2000, V3000, and V5000 | N000900L015A |
| CABLE, UL POWER SUPPLY CORD SET, 720mm, US | V1000, V2000, V3000, and V5000 | N000900L031A |
Documents / Resources
| Cambium Networks V3000 Tilt Bracket [pdf] User Manual V3000 Tilt Bracket, V3000, Tilt Bracket, Bracket, Tilt |