FS CA-JP012 12 Inch Junction Box User Guide

FS CA-JP012 12 Inch Junction Box

Product Information

Specifications:

• Model: CA-JP012
• Type: Junction Box
• Size: 12-inch
• Mounting Hole Drill Diameter: 4-11mm
• Compliance: CE, UKCA
• Manufacturer: FS.COM Innovation Ltd
• Address: Unit 8, Urban Express Park, Union Way, Aston, Birmingham, B6 7FH, United Kingdom

Product Usage Instructions

1. Choose the drilling position of the holes according to the sticker’s installation holes.
2. Pull the cable through the hole in the wall to connect.

Installation Steps:

1. Mark the drilling positions based on the sticker guide.
2. Use a drill with a diameter between 4mm to 11mm to create the mounting holes.
3. Insert the cables through the drilled holes for connections.
4. Secure the junction box in place using appropriate screws or mounting hardware.

Maintenance:
Regularly check the junction box for any signs of wear or damage. Ensure all connections are secure and free from corrosion.

Safety Precautions:

• Ensure the power is switched off before installing or servicing the junction box.
• Use appropriate personal protective equipment when handling tools or cables.
• Avoid overloading the junction box beyond its specified capacity.

Cleaning Instructions:
Use a dry or slightly damp cloth to clean the surface of the junction box. Avoid using abrasive cleaners that may damage the finish.

FAQ

• Q: How do I know if the junction box is compatible with my cables?
  A: The junction box is designed for standard cables with diameters within the specified range. Ensure your cables fit within the mounting hole drill diameter.
• Q: Can I paint over the junction box for better aesthetics?
  A: It is not recommended to paint over the junction box as it may affect its performance and durability.

Hardware

Installation

1. Choose the drilling position of the holes according to the sticker’s installation holes and pull the cable through the hole on the wall for connecting.
   NOTE: The position of the cable hole is under the sticker.
2. Drill the holes on the wall, with the external diameter and the hole depth referencing the outer diameter and the length of expansion bolts.
3. Install the expansion bolts and make sure they are tight.
4. Detach the rear panel and install it on the expansion bolts.
5. Attach the junction box to the rear panel and tighten the set screws.
6. Open the dust caps and install the plastic waterproof joint.
   NOTE: The crystal head of the network cable can not pass through the two smaller plastic waterproof joints.
7. Pull the cable through the middle of the junction box and tighten the set screws.
8. Install the PTZ bracket and the camera.

Compliance Information

CE
FS.COM GmbH hereby declares that this device complies with the Directive 2011/65/EU and (EU)2015/863. A copy of the EU Declaration of Conformity is available at www.fs.com/company/quality_control.html.

FS.COM GmbH
NOVA Gewerbepark Building 7, Am Gfild 7, 85375 Neufahrn bei Munich, Germany

UKCA
Hereby, FS.COM Innovation Ltd declares that this device complies with the Directive SI 2012 NO. 3032.

FS.COM INNOVATION LTD
Unit 8, Urban Express Park, Union Way, Aston, Birmingham, B6 7FH, United Kingdom.

Copyright © 2024 FS.COM All Rights Reserved.

Documents / Resources

FS CA-JP012 12 Inch Junction Box [pdf] User Guide CA-JP012, CA-JP012 12 Inch Junction Box, 12 Inch Junction Box, Junction Box, Box

References

• FS.com - HPC, Data Center, Enterprise, Telecom
• HPC, Data Centre, Enterprise, Telecom - FS.com Australia
• User Manual