Nothing Special   »   [go: up one dir, main page]
IDEAS home Printed from https://ideas.repec.org/a/eee/proeco/v164y2015icp43-56.html
   My bibliography  Save this article

Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited

Author

Listed:
  • Weller, Christian
  • Kleer, Robin
  • Piller, Frank T.
Abstract
Additive manufacturing (AM), colloquially known as 3D printing, is currently being promoted as the spark of a new industrial revolution. The technology allows one to make customized products without incurring any cost penalties in manufacturing as neither tools nor molds are required. Moreover, AM enables the production of complex and integrated functional designs in a one-step process, thereby also potentially reducing the need for assembly work. In this article, we discuss the impact of AM technology at both firm and industry level. Our intention is to discern how market structures will be affected from an operations management perspective. Based on an analysis of established economic models, we first identify the economic and technological characteristics of AM and distill four key principles relevant to manufacturers at firm level. We then critically assess the effects of AM at industry level by analyzing the validity of earlier assumptions in the models when these four principles apply. In so doing, we derive a set of seven propositions which provide impetus for future research. In particular, we propose that in a monopoly, the adoption of AM allows a firm to increase profits by capturing consumer surplus when flexibly producing customized products. Meanwhile in competitive markets, competition is spurred as AM may lower barriers to market entry and offers the ability to serve multiple markets at once. This should ultimately result in lower prices for consumers.

Suggested Citation

  • Weller, Christian & Kleer, Robin & Piller, Frank T., 2015. "Economic implications of 3D printing: Market structure models in light of additive manufacturing revisited," International Journal of Production Economics, Elsevier, vol. 164(C), pages 43-56.
    • Handle: RePEc:eee:proeco:v:164:y:2015:i:c:p:43-56
    DOI: 10.1016/j.ijpe.2015.02.020
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0925527315000547
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ijpe.2015.02.020?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mills, David E & Schumann, Laurence, 1985. "Industry Structure with Fluctuating Demand," American Economic Review, American Economic Association, vol. 75(4), pages 758-767, September.
    2. R. E. Caves & M. E. Porter, 1977. "From Entry Barriers to Mobility Barriers: Conjectural Decisions and Contrived Deterrence to New Competition," The Quarterly Journal of Economics, President and Fellows of Harvard College, vol. 91(2), pages 241-261.
    3. Tseng, Mei-Chiun, 2004. "Strategic choice of flexible manufacturing technologies," International Journal of Production Economics, Elsevier, vol. 91(3), pages 223-227, October.
    4. Eaton, B Curtis & Schmitt, Nicolas, 1994. "Flexible Manufacturing and Market Structure," American Economic Review, American Economic Association, vol. 84(4), pages 875-888, September.
    5. Carsten Eckel, 2009. "Endogenous Sunk Costs, Flexible Manufacturing and the Productivity Effects of International Trade," Scandinavian Journal of Economics, Wiley Blackwell, vol. 111(2), pages 369-386, June.
    6. George Norman & Jacques‐François Thisse, 1999. "Technology Choice and Market Structure: strategic aspects of flexible manufacturing," Journal of Industrial Economics, Wiley Blackwell, vol. 47(3), pages 345-372, September.
    7. Khanna, Tarun, 1995. "Racing behavior technological evolution in the high-end computer industry," Research Policy, Elsevier, vol. 24(6), pages 933-958, November.
    8. Berman, Barry, 2012. "3-D printing: The new industrial revolution," Business Horizons, Elsevier, vol. 55(2), pages 155-162.
    9. Aurelie Merle & Jean-Louis Chandon & Elyette Roux & Fabrice Alizon, 2010. "Perceived Value of the Mass-Customized Product and Mass Customization Experience for Individual Consumers," Post-Print hal-00585292, HAL.
    10. Fernando F. Suarez & Michael A. Cusumano & Charles H. Fine, 1996. "An Empirical Study of Manufacturing Flexibility in Printed Circuit Board Assembly," Operations Research, INFORMS, vol. 44(1), pages 223-240, February.
    11. Mellor, Stephen & Hao, Liang & Zhang, David, 2014. "Additive manufacturing: A framework for implementation," International Journal of Production Economics, Elsevier, vol. 149(C), pages 194-201.
    12. Banning Garrett, 2014. "3D Printing: New Economic Paradigms and Strategic Shifts," Global Policy, London School of Economics and Political Science, vol. 5(1), pages 70-75, February.
    13. Aurelie Merle & Jean-Louis Chandon & Elyette Roux & Fabrice Alizon, 2010. "Perceived Value of the Mass-Customized Product and Mass Customization Experience for Individual Consumers," Grenoble Ecole de Management (Post-Print) hal-00585292, HAL.
    14. Lars-Hendrik Röller & Mihkel M. Tombak, 1993. "Competition and Investment in Flexible Technologies," Management Science, INFORMS, vol. 39(1), pages 107-114, January.
    15. Steven C. Salop, 1979. "Monopolistic Competition with Outside Goods," Bell Journal of Economics, The RAND Corporation, vol. 10(1), pages 141-156, Spring.
    16. Donald Gerwin, 1993. "Manufacturing Flexibility: A Strategic Perspective," Management Science, INFORMS, vol. 39(4), pages 395-410, April.
    17. Milgrom, Paul & Roberts, John, 1990. "The Economics of Modern Manufacturing: Technology, Strategy, and Organization," American Economic Review, American Economic Association, vol. 80(3), pages 511-528, June.
    18. Peter Auer & Stefan Speckesser, 1997. "Labour Markets and Organisational Change: Future Working Structures for an Ageing Work Force," Journal of Management & Governance, Springer;Accademia Italiana di Economia Aziendale (AIDEA), vol. 1(2), pages 177-206, June.
    19. Gerosky, P A & Pomroy, R, 1990. "Innovation and the Evolution of Market Structure," Journal of Industrial Economics, Wiley Blackwell, vol. 38(3), pages 299-314, March.
    20. George Stigler, 1939. "Production and Distribution in the Short Run," Journal of Political Economy, University of Chicago Press, vol. 47(3), pages 305-305.
    21. MacCarthy, Bart & Brabazon, Philip G. & Bramham, Johanna, 2003. "Fundamental modes of operation for mass customization," International Journal of Production Economics, Elsevier, vol. 85(3), pages 289-304, September.
    22. Vickers, John S, 1986. "The Evolution of Market Structure When There Is a Sequence of Innovations," Journal of Industrial Economics, Wiley Blackwell, vol. 35(1), pages 1-12, September.
    23. repec:bla:jindec:v:47:y:1999:i:3:p:345-72 is not listed on IDEAS
    24. Fogliatto, Flavio S. & da Silveira, Giovani J.C. & Borenstein, Denis, 2012. "The mass customization decade: An updated review of the literature," International Journal of Production Economics, Elsevier, vol. 138(1), pages 14-25.
    25. Chang, Myong-Hun, 1993. "Flexible Manufacturing, Uncertain Consumer Tastes, and Strategic Entry Deterrence," Journal of Industrial Economics, Wiley Blackwell, vol. 41(1), pages 77-90, March.
    26. Kakati, M., 1997. "Strategic evaluation of advanced manufacturing technology," International Journal of Production Economics, Elsevier, vol. 53(2), pages 141-156, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. George Norman & Jacques‐François Thisse, 1999. "Technology Choice and Market Structure: strategic aspects of flexible manufacturing," Journal of Industrial Economics, Wiley Blackwell, vol. 47(3), pages 345-372, September.
    2. Norman, George, 2002. "The relative advantages of flexible versus designated manufacturing technologies," Regional Science and Urban Economics, Elsevier, vol. 32(4), pages 419-445, July.
    3. Burak R. Uras & Ping Wang, 2017. "Production Flexibility, Misallocation and Total Factor Productivity," NBER Working Papers 23970, National Bureau of Economic Research, Inc.
    4. Carsten Eckel, 2009. "International trade, flexible manufacturing, and outsourcing," Canadian Journal of Economics/Revue canadienne d'économique, John Wiley & Sons, vol. 42(4), pages 1449-1472, November.
    5. Na Liu & Pui-Sze Chow & Hongshan Zhao, 2020. "Challenges and critical successful factors for apparel mass customization operations: recent development and case study," Annals of Operations Research, Springer, vol. 291(1), pages 531-563, August.
    6. Hartmut Egger & Michael Koch, 2012. "Labour unions and multi-product firms in closed and open economies," Canadian Journal of Economics, Canadian Economics Association, vol. 45(4), pages 1456-1479, November.
    7. Lacroix, Rachel & Seifert, Ralf W. & Timonina-Farkas, Anna, 2021. "Benefiting from additive manufacturing for mass customization across the product life cycle," Operations Research Perspectives, Elsevier, vol. 8(C).
    8. Ana Faria & Paul Fenn & Alistair Bruce, 2005. "Production technologies and technical efficiency: evidence from Portuguese manufacturing industry," Applied Economics, Taylor & Francis Journals, vol. 37(9), pages 1037-1046.
    9. Manu Goyal & Serguei Netessine, 2011. "Volume Flexibility, Product Flexibility, or Both: The Role of Demand Correlation and Product Substitution," Manufacturing & Service Operations Management, INFORMS, vol. 13(2), pages 180-193, March.
    10. Kleer, Robin & Piller, Frank T., 2019. "Local manufacturing and structural shifts in competition: Market dynamics of additive manufacturing," International Journal of Production Economics, Elsevier, vol. 216(C), pages 23-34.
    11. repec:got:cegedp:45 is not listed on IDEAS
    12. Yang, Liu & Wang, Yonggui & Ma, Jun & Ng, Chi To & Cheng, T.C.E., 2014. "Technology investment under flexible capacity strategy with demand uncertainty," International Journal of Production Economics, Elsevier, vol. 154(C), pages 190-197.
    13. Marcel Boyer & Michel Moreaux, 1995. "Capacity Commitment Versus Flexibility: The Technological Choice Nexus in a Strategic Context," CIRANO Working Papers 95s-35, CIRANO.
    14. Gal-Or, Esther, 2002. "Flexible manufacturing systems and the internal structure of the firm," International Journal of Industrial Organization, Elsevier, vol. 20(8), pages 1061-1096, October.
    15. Joon Lim, 2009. "Strategic Choice of Manufacturing Flexibility in Intermediate Goods Markets," Korean Economic Review, Korean Economic Association, vol. 25, pages 91-104.
    16. Astrid Jung, 2001. "Are Product Innovation and Flexible Technology Complements?," CIG Working Papers FS IV 01-07, Wissenschaftszentrum Berlin (WZB), Research Unit: Competition and Innovation (CIG), revised Feb 2003.
    17. Carsten Eckel & J. Peter Neary, 2010. "Multi-Product Firms and Flexible Manufacturing in the Global Economy," The Review of Economic Studies, Review of Economic Studies Ltd, vol. 77(1), pages 188-217.
    18. Eckel, Carsten & Irlacher, Michael, 2017. "Multi-product offshoring," European Economic Review, Elsevier, vol. 94(C), pages 71-89.
    19. Martin Baumers & Luca Beltrametti & Angelo Gasparre & Richard Hague, 2017. "Informing additive manufacturing technology adoption: total cost and the impact of capacity utilisation," International Journal of Production Research, Taylor & Francis Journals, vol. 55(23), pages 6957-6970, December.
    20. Ayd{i}n Alptekinou{g}lu & Charles J. Corbett, 2008. "Mass Customization vs. Mass Production: Variety and Price Competition," Manufacturing & Service Operations Management, INFORMS, vol. 10(2), pages 204-217, August.
    21. Gilbert E. Metcalf & George Norman, 2002. "Oligopoly Deregulation in General Equilibrium: A Tax Neutralization Result," Discussion Papers Series, Department of Economics, Tufts University 0210, Department of Economics, Tufts University.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:proeco:v:164:y:2015:i:c:p:43-56. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/ijpe .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.