A tool that deauth 2.4GHz and 5GHz Wi-Fi networks via BW16 on serial console.

• Minimal Setup.
• Easily controlled by Serial Console.
• It deauthenticates 2.4GHz and 5GHz WiFi networks both.

• Ai-Thinker BW16 RTL8720DN Development Board

• It has two variants : Type-B and Type-C connectors.

1. Download Arduino IDE from here according to your Operating System.

2. Install it.

3. Go to File → Preferences → Additional Boards Manager URLs.

4. Paste the following link :

   https://github.com/ambiot/ambd_arduino/raw/master/Arduino_package/package_realtek_amebad_index.json
   

5. Click on OK.

6. Go to Tools → Board → Board Manager.

7. Wait for sometimes and search Realtek Ameba Boards (32-Bits ARM Cortex-M33@200MHz) by Realtek.

8. Simply install version 3.1.7.

9. Restart the Arduino IDE by closing and open again.

10. Done!

1. Download or Clone the Repository.
2. Open the folder and just double click on SpectraReaper.ino file.
   • It opens in Arduino IDE.
3. Compile the code.
4. Select the correct board from the Tools → Board → AmebaD ARM (32-bits) Boards.
   • It is Ai-Thinker BW16 (RTL8720DN).
5. Select the correct port number of that board.
6. Go to Tools → Board → Auto Flash Mode and select Enable.
7. Upload the code.
8. Done!

1. Open Serial Console by click here.
2. Select baud rate 115200.
3. Click on Connect button.
4. When it shows Connected! Go On! then your BW16 Development Board is ready to use.
5. Type help to get available commands.

• 🔵 - The BW16 scanning for nearby wifi networks.
• 🟢 - The BW16 board is ready to deauth.
• 🔴 - The BW16 board is sending deauthentication frames.