Automatically install and use tree-sitter major modes in Emacs 29+. If the tree-sitter version can’t be used, fall back to the original major mode.

Each of these behaviors are configurable and documented under the “Configuration” section. By activating global-treesit-auto-mode, Emacs will:

• Automatically switch to <name>-ts-mode when the grammar for <name> is installed
• Stick with <name>-mode if the grammar isn’t installed
• Automatically install a grammar before opening a compatible file
• Modify auto-mode-alist for tree-sitter modes

There is also a convenience function M-x treesit-auto-install-all, which will install all (or a selected subset) of the maintained and compatible grammars. You can add these grammars to your auto-mode-alist automatically by invoking the treesit-auto-add-to-auto-mode-alist function in your configuration.

treesit-auto is available from MELPA. After following their setup, you can use your preferred package manager. If that’s the default package.el, simply M-x package-refresh-contents and then

M-x package-install RET treesit-auto

If you want a local clone of the repository, rather than just a copy of the source, you might instead use package-vc-install

M-x package-vc-install RET https://github.com/renzmann/treesit-auto.git

Then, in your Emacs configuration file (~/.emacs.d/init.el),

(use-package treesit-auto
  :config
  (global-treesit-auto-mode))

For most users, this will be enough. There are some nifty things you might want to enable, though, which are covered in the “Configuration” section below.

This is how I configure treesit-auto for my own personal use.

(use-package treesit-auto
  :custom
  (treesit-auto-install 'prompt)
  :config
  (treesit-auto-add-to-auto-mode-alist 'all)
  (global-treesit-auto-mode))

Emacs 29, while featuring treesit.el and a convenient treesit-install-language-grammar, will not feature an intelligent way to choose between a default mode, such as python-mode, and its tree-sitter enhanced version, python-ts-mode. This package attempts to remedy that by adjusting the major-mode-remap-alist and treesit-language-source-alist variables in order to get the following behavior:

1. If the grammar is installed, then switch to the appropriate tree-sitter mode:

In this case, assuming we open a Python buffer, and the Python tree-sitter grammar is installed, then Emacs will use python-ts-mode instead of python-mode.

2. The grammar is NOT installed and treesit-auto-install is non-nil:

When the grammar is not installed and treesit-auto-install is t, then upon activating any major mode that has a corresponding tree-sitter mode, the grammar will be downloaded and compiled using treesit-install-language-grammar. Emacs will then activate the tree-sitter major mode for that buffer.

prompt is like t, except a message will be displayed in the echo area asking for a yes/no response before attempting the installation.

As an example for both cases: if I visit a Python file and didn’t already have the grammar installed, I wind up with an installed grammar and a buffer using python-ts-mode.

Otherwise, when treesit-auto-install is nil, it will try to fall back to another major mode as described in the following two rules.

3. If the grammar is NOT installed, and a fallback is specified

Most languages will have a fallback mode specified, such as python-ts-mode falling back to python-mode, if the grammar is not installed. If you ever need to double-check what that fallback will be, you can double check what’s in the recipe for that language like this:

(treesit-auto-recipe-remap (alist-get 'python treesit-auto-lang-recipe-alist))
    ⇒ python-mode

See “Configuration/Configuring behavior for a specific language” in case you would like to specify different fallback modes than the default.

4. The grammar is installed, but there is no fallback mode

You can optionally use the treesit-auto-add-to-auto-mode-alist function to ensure that your installed tree-sitter languages have their corresponding ...-ts-mode added to auto-mode-alist, so that Emacs opens the buffer in that ...-ts-mode, rather than the default Fundamental mode.

Supposing for instance we don’t have typescript-mode installed, then even if we do have typescript-ts-mode installed along with the typescript grammar compiled in ~/.emacs.d/tree-sitter/, Emacs still won’t use typescript-ts-mode unless you also added '("\\.ts\\'" . typescript-ts-mode) to auto-mode-alist. By calling (treesit-auto-add-to-auto-mode-alist) in your configuration, this modification to auto-mode-alist is done automatically for you.

5. All other cases…

This is the most general case, where the grammar is not installed, treesit-auto-install is nil, and no fallback mode is specified in the language recipe present on treesit-auto-recipe-list. In this case, we still gain the benefit of quickly installing grammars through treesit-install-language-grammar without having the build the recipe interactively, but treesit-auto will make no attempt to switch away from the tree-sitter mode.

If you have modified treesit-language-source-alist through setq, then it is recommended to put any configuration of this package AFTER that setq.

You can globally alter the behavior of treesit-auto to only consider a specific set of languages by setting the treesit-auto-langs list to a set of language symbols. By default, this list includes every possible language that treesit-auto supports, so you can use M-x describe-variable RET treesit-auto-langs to see what the options are.

One way to use this variable is to just set it manually:

(setq treesit-auto-langs '(python rust go))

Now, treesit-auto features will only ever affect Python, Rust, and Go files. Running treesit-auto-install-all will only install these three grammars, and no automatic prompting/installation will occur when visiting a buffer that is not one of these three, either.

Another method is to disable specific languages by just removing them from this list:

(delete 'awk treesit-auto-langs)

Here, treesit-auto behaves as it normally would for all languages except AWK.

The treesit-auto-install variable controls whether a grammar should be installed automatically when activating a major mode compatible with tree-sitter.

1. nil, the default, means treesit-auto won’t try to install anything, and will rely on the fallback logic outlined above
2. t means treesit-auto should always try to clone and install a grammar when missing
3. prompt will cause a yes/no prompt to appear in the minibuffer before attempting installation

(setq treesit-auto-install 'prompt)

Then, supposing I don’t have libtree-sitter-python.so (or its mac/Windows equivalent) under ~/.emacs.d/tree-sitter (or anywhere else in treesit-extra-load-path), visiting a Python file or calling M-x python-ts-mode will generate this prompt:

Tree-sitter grammar for python is missing.  Would you like to install it from https://github.com/tree-sitter/tree-sitter-python? (y or n)

Responding with “yes” will use treesit-install-language-grammar to go fetch and compile the missing grammar.

The other function that respects this variable is treesit-auto-install-all. When treesit-auto-install is t, using M-x treesit-auto-install-all will skip all prompts. Otherwise, it will ask before attempting the installation.

The variable treesit-auto-recipe-list keeps track of all the language “recipes.” These control how treesit-auto decides which modes to upgrade/downgrade to/from, where the source code of the language grammar is hosted, and which C/C++ compiler to use. Each recipe can take these arguments:

:lang
:ts-mode
:remap
:url
:revision
:requires
:source-dir
:cc
:c++

To create a recipe, use make-treesit-auto-recipe:

(setq my-js-tsauto-config
      (make-treesit-auto-recipe
       :lang 'javascript
       :ts-mode 'js-ts-mode
       :remap '(js2-mode js-mode javascript-mode)
       :url "https://github.com/tree-sitter/tree-sitter-javascript"
       :revision "master"
       :source-dir "src"
       :ext "\\.js\\'"))

(add-to-list 'treesit-auto-recipe-list my-js-tsauto-config)

Here, we’ve specified that the tree-sitter compiler will be creating a file named libtree-sitter-javascript.so (or .dylib or .dll), based on the :lang field. The corresponding tree-sitter mode in Emacs is called js-ts-mode, and all of js2-mode, js-mode, and javascript-mode should attempt switching to the js-ts-mode, if possible.

Moreover, since js-2-mode is first under the :remap section, that is the “primary fallback.” Meaning that if the tree-sitter grammar is not available, it will be the first mode tried. If that doesn’t work, it will try js-mode, and javascript-mode, in that order, until one does work. If only one fallback needs to be specified, a single quoted symbol is also acceptable. For instance, python-ts-mode just uses :remap 'python-mode in this argument position.

If a grammar mandates any other grammars be installed as a dependency, the :requires keyword can specify a language symbol or list of symbols that should be installed. One example of this is found in the TypeScript recipe, which specifies :requires 'tsx, since activating typescript-ts-mode on some Emacs builds will attempt to load the TSX grammar.

The :url, :revision, :source-dir, :cc, and :c++ arguments are all documented under treesit-language-source-alist, which is part of base Emacs, not this package.

This package does not modify any of your major mode hooks. That is, if you have functions in python-mode-hook, but not in python-ts-mode-hook, then your hook from python-mode will not be applied, assuming python-ts-mode is what gets loaded. For major modes in which this is a concern, the current recommendation is to address this as part of your configuration.

(setq rust-ts-mode-hook rust-mode-hook)

Some modes have a shared base, such as python-ts-mode and python-mode both deriving from python-base-mode. For these languages, you can opt to hook into python-base-mode-hook instead of explicitly setting the tree-sitter mode’s hook.

You can register tree-sitter modes to auto-mode-alist by calling treesit-auto-add-to-auto-mode-alist. Depending on the optional argument langs, this function can behave in three different ways:

1. nil, the default - Only add tree-sitter modes to auto-mode-alist if the tree-sitter mode is available to Emacs and the grammar is installed.
2. 'all - For every tree-sitter mode available to Emacs and in treesit-auto-langs, add it to auto-mode-alist regardless of whether the grammar is installed. This has the beneficial side effect of installing grammars for you when opening files that have a tree-sitter mode that comes with Emacs, but have no fallback mode. Examples of this are rust-ts-mode, go-ts-mode, and a few others in Emacs 29+.
3. A list of language symbols - behaves like 'all, but only for the listed languages

For instance, you might run this function as:

(treesit-auto-add-to-auto-mode-alist '(rust go toml))

This registers your tree-sitter modes according to the common file extension for Rust, Go, and TOML, but no other modes. Most users will probably want to use (treesit-auto-add-to-auto-mode-alist 'all) for the easiest general behavior; always prompting/installing grammars when we can.

I find it a good practice to be skeptical of adding any new dependency to my Emacs configuration. So, what would you have to do to get similar behavior in your Emacs configuration without the treesit-auto package?

We’ll take two examples: TypeScript and Python.

Emacs 29 ships with typescript-ts-mode and tsx-ts-mode, but no equivalent typescript-mode or tsx-mode. python-ts-mode and python-mode, on the other hand, are both available out of the box. If you wanted these grammars to automatically install on launch, and then use the tree-sitter modes instead of the base modes for every file, you’d need the following code in your init file:

(setq treesit-language-source-alist
      '((typescript . ("https://github.com/tree-sitter/tree-sitter-typescript" "master" "typescript/src"))
        (tsx . ("https://github.com/tree-sitter/tree-sitter-typescript" "master" "tsx/src"))
        (python . ("https://github.com/tree-sitter/tree-sitter-python"))))

(dolist (source treesit-language-source-alist)
  (unless (treesit-ready-p (car source))
    (treesit-install-language-grammar (car source))))

(add-to-list 'auto-mode-alist '("\\.ts\\'" . typescript-ts-mode))
(add-to-list 'auto-mode-alist '("\\.tsx\\'" . tsx-ts-mode))
(add-to-list 'major-mode-remap-alist '(python-mode . python-ts-mode))

There are plenty of reasons why some users would prefer to take this type of hand-tuned approach to their tree-sitter modes. For most Emacs people, though, you can see the natural progression of where a config like the above would go:

• You need to maintain a library of language symbols (which must match the language’s grammar.js), URLs, revisions, and sub-directories for treesit-language-source-alist. Additionally, you’d need to know that typescript-ts-mode relies on the tree-sitter grammar for tsx, which must be installed alongside the grammar for TypeScript. This is probably the main value proposition of this package, since all of this information is stored under the community-contributed treesit-auto-recipe-list
• You need to be aware of when to use auto-mode-alist and major-mode-remap-alist, depending on what modes are installed into Emacs
• If you want lazy installation of grammars, rather than installing them all up-front in your init.el, you’d need to write some hooks or derived modes to check treesit-ready-p for the current buffer, and install the language before loading the main tree-sitter mode
• After a certain number of langauges, it becomes unweildy to do these add-to-list calls for every single one, and it’s better to programmatically operate on a list of selected languages

If you were to follow this chain yourself, you’d probably wind up with something in your init.el that looks very similar to the code in this package.

All in all, this is a small package. Roughly half of it is just maintaining a library of information for treesit-language-source-alist, and the other half works through the logic of handling edge cases related to the remaining bullets above.

This package is, admittedly, a hack. treesit.el provides an excellent foundation to incremental source code parsing for Emacs 29, and over time that foundation will expand into an improved core editing experience. With that in mind, I fully expect this package to eventually be obsolesced by the default options in Emacs 30 and beyond. That does not preclude us from adding a few quality of life improvements to Emacs 29, though, and so it still seems prudent to have this plugin available in the meantime.

treesit-auto doesn’t play super well with Org-babel, since Org has its own methods of hooking into and using languages. In particular, you may need to set org-src-lang-modes yourself to get tree-sitter modes working correctly.

Another side behavior you may encounter is when opening an Org document with shell scripts inside and treesit-auto-install is non-nil, then treesit-auto will prompt to install the Bash grammar, but won’t display the prompt until you interact with Emacs in some way, such as using next-line (C-n by default) or hovering over Emacs with your mouse.

Bug reports, feature requests, and contributions are most welcome. Even though this is a small project, there is always room for improvement. I also appreciate “nitpicky” contributions, such as formatting, conventions, variable naming, code simplification, and improvements to language in documentation.

Issues are tracked on GitHub, which is also where patches and pull requests should be submitted.

If you would like to submit a new language recipe to be distributed as part of this package, see CONTRIBUTING.org for a quick guide on how to write and submit the new recipe.