Receives Wireless BBQ Thermometer Telegrams via RF-Receiver attached to Raspberry Pi and sends it to a Elastic Search Index and display the data using e.g. Grafana:

This Dashboard is provided here

Needs pigpiod (http://abyz.co.uk/rpi/pigpio/pigpiod.html) running to work start with:

pigpiod -x -1

sudo apt-get install python3-httplib2

Install Grafana

Install ES

Data pin from your receiver to GPIO 18 on your raspberry. GND and Power according to the image bellow:

PUT http://192.168.1.111:9200/bbq/

{
    "settings" : {
        "index" : {
            "number_of_shards" : 1, 
            "number_of_replicas" : 1
        }
    }
}

POST http://192.168.1.111:9200/bbq/_mapping/reading

{
      "reading": {
        "properties": {
          "created": {
            "type": "long"
          },
          "checksum": {
            "type": "double"
          },
          "temperature_1": {
            "type": "long"
          },
          "temperature_2": {
            "type": "long"
          }
        }
      }
}

maverick.py

Copy the bbq.service file to:

/etc/systemd/system/bbq.service

Reload systemd:

sudo systemctl daemon-reload

Enable the service:

sudo systemctl enable bbq.service

Start the service:

sudo systemctl start bbq.service

Check Log:

sudo journalctl --unit=bbq

tail -f /var/log/syslog | grep bbq