The firmware for CC2530, CC2531, CC2652R, CC2652P, CC2652RB, CC2651R1, CC1352P chips allows creating a device with a easily configurable functionality including inputs, outputs, ADC, pulse counter/generator, I2C, external sensors.

The device with this firmware can work as a router or end-device.

The firmware also supports built-in and external (CC2590, CC2591, CC2592, RFX2401) RF amplifiers.

The firmware can work on battery powered-devices with power consumption up to 0.4uA.

A long list of firmware features.

1. Unpack the ZIP archive.
2. Launch the "FirmwareConfig.exe" utility.
3. Configure the firmware for your chip, board, and needs. Optionally, you may click the "File - Read settings from a file" menu item and load settings from an existing preset in the "Presets" folder.
4. Click the "Save" button and get the final HEX file. Note: some features may require the Premium version of this firmware.

⚠️ Caution: Please do not use HEX files in the "hex" folder directly, without a configuration.

Flash firmware and permit joining to a network on your coordinator.

Power on, wait 2 seconds, power off, repeat this cycle three times.

If you configured first input pin, click and hold it for 10 seconds.

Home page

Download

Report issues