Lomorage Web Application

Not a fully Web Lomorage client yet, currently it only supports uploading image and video files.

Download the binary and specify the address of lomo-backend service via --baseurl parameter, and then open browser to access lomo-web. For example if the Lomorage Service (lomod) is running at "192.168.1.12:8000", and you can either run lomo-web at different device with Lomorage Service or run lomo-web at the same device with Lomorage Service.

./lomo-web --baseurl http://192.168.1.12:8000

If running lomo-web at the same device with Lomorage Service, you can skip --baseurl and lomo-web will use the IP address on this device and default Lomorage service (lomod) port 8000.

./lomo-web

Then you can open broswer and access "http://[ip-of-lomo-web]", the default port is 80 and you can change that by using "--port" parameter when running "lomo-web".

Download the binary at https://github.com/lomorage/lomo-web/releases, now support MacOS and Raspberry Pi.

1. Install golang

   git clone https://github.com/udhos/update-golang
   cd update-golang
   sudo ./update-golang.sh
   

2. Install dependencies

   go install github.com/GeertJohan/go.rice@latest
   go install github.com/GeertJohan/go.rice/rice@latest
   

3. Build

   ./build.sh