- Measurement frequency: 100Hz-200kHz
- Usable impedance range: 20mOhm-1MOhm (measurements above and below this range are possible but due to very low ADC values, the reported phase will be quite noisy)
- Optionally apply DC bias voltage up to 10V (measure effective capacitance of MLCCs)
- Autoranging
- Open/Short calibration (lead compensation)
- Fully configurable sweep, showing up to two parameters across frequency:
- Impedance
- Phase
- Capacitance
- Inductance
- ESR
- Quality factor
- Two possible toolchains: System Workbench for STM32 or IAR
- Slightly modified PCB
- Laser-cut acrylic case