Nothing Special   »   [go: up one dir, main page]

Skip to content

Prusa iteration 3 - Semi-Utilitronic Industries edition

License

Notifications You must be signed in to change notification settings

gcolbourn/Prusa3-SemiU

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

This is Prusa iteration 3 - Semi-Utilitronic Industries edition

Published under GPL v3

All models are in the box_frame folder, including models for aluminium single plate.

Original files from https://github.com/josefprusa/Prusa3, https://github.com/josefprusa/Prusa3-vanilla, http://www.thingiverse.com/thing:18379. Changes:

  • minimal Prusa i3 x ends: zip ties, built-in adjustable tensioner and easy z height adjustor.
  • increased height on y corners to avoid clearance issue with bed mountings.
  • combined mounting holes for hot end -> extruder & extruder -> x-carriage (uses M5x40 bolts).
  • strengthened and lengthened extruder idler arms.
  • widened a 608ZZ bearing hole on the extruder a bit so it fits better (original extruder by jonaskuehling: http://www.thingiverse.com/thing:18379)

Stls on Thingiverse as a single build plate for the single plate version: http://www.thingiverse.com/thing:534731

To buy a hardware kit to fit the plastic parts: http://www.emakershop.com/listing?l=1137 (complete without plastic parts) or http://www.emakershop.com/listing?l=768 (hardware only, no plastic parts).

About

Prusa iteration 3 - Semi-Utilitronic Industries edition

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • OpenSCAD 90.9%
  • C++ 8.3%
  • Other 0.8%