The open-source action camera.

1. Install DietPi using the docs. Add the line dtoverlay=imx219 to config.txt in the bootfs partition.
2. Put the contents of software into an easily accessible directory.
3. Move autostart.service into /etc/systemd/system/. You may have to edit the path to action.py.
4. Run sudo systemctl enable autostart.service.
5. Install the following dependencies:

• rpi-lgpio
• picamera2
• luma.oled
• ffmpeg

6. Open __init__.py in /usr/lib/python3/dist-packages/luma/oled/device/. Find __init__ function under class ssd1306(device). Change height parameter from 64 to 32.

🚧 In development.

I recommend using a filament with impact, UV, and fatigue resistance. Most recent prototype printed in PETG with up to 4 wall lines (0.4 mm line width).

• Raspberry Pi Zero
• Arducam IMX219 camera (B0390)
• SSD1306 128x32 OLED
• TP4056 Li-ion charging module (USB-C input)
• 18650 Li-ion cell
• tactile button (12mm x 12mm)
• SS12D10 slide switch
• 26 AWG wire
• 2x nickel strips
• 4x m2.5 x 8mm flat head screws
• 2x m2.5 x 5mm flat head screws
• 4x m2 x 4mm flat head screws