PHP client to monitor and control your Starlink dish via the local gRPC API.

This client uses the gRPC API of your Starlink device. API classes are generated based on the protoset file extracted from the reflection service of the Starlink device.

This client is not affiliated with SpaceX or Starlink.

It also comes with an obstruction map generator to visualize the obstruction map of the dish.

This package can be installed via composer, be aware that you need to have the grpc extension installed on your system.

composer require srwiez/starlink-client

You can use the SRWieZ\StarlinkClient\Dishy class to interact with your Starlink device.

Get all the information about the device.

use SRWieZ\StarlinkClient\Dishy;

$dishy = new Dishy('192.168.100.1:9200');
$infos = $dishy->getStatus();

Get the sleep/powersave configuration

$sleepConfig = $dishy->getSleepModeConfig();

Get history of the following statistics:

• Ping drop rate
• Ping Latency
• Download speed
• Upload speed
• Power usage

$statistics = $dishy->getStatsHistory();

If enabled in the settings of the mobile app, you can get the location of the dish.

$location = $dishy->getLocation();

You can obtain the obstruction map of the dish. For more information about the representation of each pixel in the data, refer to this link.

use SRWieZ\StarlinkClient\Dishy;

$dishy = new Dishy('192.168.100.1:9200');

// Get the obstruction map
$data = $dishy->getObstructionMap();

// Colored image
(new ObstructionMapGenerator($data))
    ->transparent()
    ->generate()
    ->asFile('assets/obstruction_map.png');

(new ObstructionMapGenerator($data))
    ->transparent(false)
    ->grayscale()
    ->opacity(0.95)
    ->generate()
    ->asFile('assets/obstruction_map_grayscale.png');

See result in the assets folder or the images above.

Using the local gRPC API, you can send a limited set of commands to the user terminal. These commands are all listed below.

use SRWieZ\StarlinkClient\Dishy;

$dishy = new Dishy('192.168.100.1:9200');

// Reboot the dish
$dishy->reboot();

// Stow the dish
$dishy->stow();

// Unstow the dish
$dishy->unstow();

// Reset obstruction map
$dishy->resetObstructionMap();

// Enable power save mode
$dishy->setSleepModeConfig(
    start: 60, // 01:00
    duration: 120, // 03:00
);

// Disable power save mode
$dishy->disableSleepMode();

If you prefer to use the gRPC client directly, you can use the generated DeviceClient class.

use SpaceX\API\Device\DeviceClient;
use Grpc\ChannelCredentials;
use SpaceX\API\Device\GetStatusRequest;

$client = new DeviceClient('192.168.100.1:9200', [
    'credentials' => ChannelCredentials::createInsecure(),
]);

[$response, $status] = $client->Handle(
    new Request(['get_status' => new GetStatusRequest()])
)->wait();

Contributions are welcome!

• Finish CLI tool / examples
• Add more tests
• Create a script to generate proper enums and parse the values in the response to return those enums.
• Implement the authentication web API used by the mobile app to gain more control over the dish (e.g., snow melt mode, etc.).

If you have a starlink in your local network, you can update the client by running the following command.

Before running the command, make sure you have the grpcurl, protoc and grpc_php_plugin installed on your system.

./update_client.sh

Clone the project and run composer update to install the dependencies.

Before pushing your changes, run composer qa.

This will run pint (code style), phpstan (static analysis), and pest (tests).

Additionally, if you have a Starlink dish on your local network, you can update the gRPC client by running ./update_client.sh. This command will update everything under the SpaceX namespace. After that, run composer qa to ensure everything is still functioning properly. If everything is fine and new functionality has been published by the gRPC reflection service, you can submit a pull request for your changes.

Starlink PHP Client was created by Eser DENIZ.

The following projects inspired this library and served as a reference:

• https://github.com/ewilken/starlink-rs
• https://github.com/sparky8512/starlink-grpc-tools
• https://github.com/fullstorydev/grpcurl

Starlink PHP Client is licensed under the MIT License. See LICENSE for more information.